| Rev |
Log message |
Author |
Age |
Path |
| 333 |
Fixed missing semicolons in o8_sys_timer_ii.vhd,
Added faulting address capture in the RAM models,
Modified o8_ram_1k.vhd to use 32-bit WPR |
jshamlet |
423d 08h |
/open8_urisc/trunk/VHDL/o8_ram_4k.vhd |
| 259 |
Fixed issue where Write_Fault wasn't defaulting to '0' when Write_Protect was set to FALSE,
Added a pulse interval measurement entity,
Fixed comments. |
jshamlet |
1633d 17h |
/open8_urisc/trunk/VHDL/o8_ram_4k.vhd |
| 251 |
Added RAM write fault detection, which can be used to indicate a memory write violation by the CPU. This allows a clean shutdown in the event of a memory problem/program crash.
Fixed a bug in the status_led.vhd entity that kept the flashing light function from working. The new code uses a maximal length 24-bit LFSR to create long delays. This is more efficient than a binary counter, but results in non-exact frequencies as a function of SYSTEM_FREQUENCY / (2^24-1).
Added the ability to use unsigned offsets to the LDO/STO instructions. The original behavior of signed offsets is preserved if the Unsigned_Index_Offsets is left unset or set to FALSE. While inserting this code, pipeline registers were also inserted into the address generation logic for indexed instructions. This simplifies the final multiplexor and improves FMax at the slight expense of LDO/SDO now taking one additional clock cycle to execute. |
jshamlet |
1635d 12h |
/open8_urisc/trunk/VHDL/o8_ram_4k.vhd |
| 244 |
Added two new generics to the CPU model. The first is a supervisory mode that disables the STP PSR_I instruction. This prevents errant code execution from setting the I bit, and disabling any subsequent memory protection logic. The second allows the default state of the I bit to be set at startup. If set true, initialization code will run with the I bit set, allowing it to bypass memory protection.
Also modified the RAM models to include write mask logic, where the mask register is write-protected by the I bit in the CPU. When enabled, the models will prevent code from writing to memory regions which do not have their mask bits set. The upshot is that code can effectively "write protect" the RAM - which is useful for multitasking applications.
Also, most modules have been updated with write qualification inputs, allowing a similar scheme to be used for I/O, though not as elegantly. I use a register module, whose own write qual line is attached to the external copy of the I bit as an I/O write protect register.
Lastly, added a new externally triggered timer, which can generate pulses with programmable delays and widths, and which can interrupt on either the input trigger, the output rising edge, or output falling edge. The time base can be either the internal microsecond tick signal, or an external clock. |
jshamlet |
1655d 14h |
/open8_urisc/trunk/VHDL/o8_ram_4k.vhd |
| 243 |
Optimized code to prefer RAM vs register. |
jshamlet |
1662d 17h |
/open8_urisc/trunk/VHDL/o8_ram_4k.vhd |
| 242 |
Added write protect logic to the RAM cores and system timer as part of scheme to keep tasks from messing up the scheduler or other task's memory. The RAM is now divided into regions with a separate write mask register. The write mask register itself is only writeable with the I bit is set (during an interrupt or by setting it using STP PSR_I). The 1K memory is divided into 16, 64 byte regions while the 4K memory is divided into 32, 128 byte regions. The system timer simply checks for the I bit being set when the write protect generic is set.
Note that setting the write_protect generic false, or leaving it unset, will keep the previous behavior. |
jshamlet |
1662d 18h |
/open8_urisc/trunk/VHDL/o8_ram_4k.vhd |
| 224 |
Finished new Open8 bus record, which now includes the clock, reset and a microsecond tick. The CPU now accepts a clock and pll_locked signal, which it uses to generate the system reset in the bus record. It also contains a simple microsecond counter to feed the usec_tick in the record. This logic was removed from the real time clock and system timer entities, which now use the global version. Bus connections should be dramatically simplified, as only the read logic and interrupts are still run as separate signals. |
jshamlet |
1689d 21h |
/open8_urisc/trunk/VHDL/o8_ram_4k.vhd |
| 223 |
Added an OPEN8_BUS_TYPE record to simplify connection to Open8 modules. The CPU now passes and Open8_Bus out, which supplies the bus address, write enable, write data, and read enable. Read data and interrupts are still handled as separate signals, since they are muxed/connected at the next level up. |
jshamlet |
1690d 14h |
/open8_urisc/trunk/VHDL/o8_ram_4k.vhd |
| 217 |
Broke out the vdsm8 as a separate entity, since it is used in several places,
Even MORE code cleanup. |
jshamlet |
1691d 15h |
/open8_urisc/trunk/VHDL/o8_ram_4k.vhd |
| 209 |
Fixed an issue in the PIT timer that caused an immediate interrupt on interval write,
Fixed an issue in the epoch timer that resulted in a spurious interrupt due to extra LSB's being set by default in the set point register,
While cleaning elsewhere, founding a spacing issue in the CPU HDL,
Added a 4k ROM and MW core. |
jshamlet |
1697d 10h |
/open8_urisc/trunk/VHDL/o8_ram_4k.vhd |
