Rev |
Log message |
Author |
Age |
Path |
224 |
Finished new Open8 bus record, which now includes the clock, reset and a microsecond tick. The CPU now accepts a clock and pll_locked signal, which it uses to generate the system reset in the bus record. It also contains a simple microsecond counter to feed the usec_tick in the record. This logic was removed from the real time clock and system timer entities, which now use the global version. Bus connections should be dramatically simplified, as only the read logic and interrupts are still run as separate signals. |
jshamlet |
1593d 13h |
/open8_urisc/trunk/VHDL/o8_rtc.vhd |
223 |
Added an OPEN8_BUS_TYPE record to simplify connection to Open8 modules. The CPU now passes and Open8_Bus out, which supplies the bus address, write enable, write data, and read enable. Read data and interrupts are still handled as separate signals, since they are muxed/connected at the next level up. |
jshamlet |
1594d 06h |
/open8_urisc/trunk/VHDL/o8_rtc.vhd |
217 |
Broke out the vdsm8 as a separate entity, since it is used in several places,
Even MORE code cleanup. |
jshamlet |
1595d 07h |
/open8_urisc/trunk/VHDL/o8_rtc.vhd |
213 |
Code and comment cleanup |
jshamlet |
1599d 08h |
/open8_urisc/trunk/VHDL/o8_rtc.vhd |
211 |
Ok, this time with feeling. Timer should now properly reset on interval update. |
jshamlet |
1600d 12h |
/open8_urisc/trunk/VHDL/o8_rtc.vhd |
210 |
Modified the timers to reset on new interval write. This avoids an issue in the original design where the timer had to reach zero before updating, potentially causing unwanted interrupts.
Also added a flag to the CPU to allow interrupts to be processed sequentially based on the state of the I bit. This one is set to false by default, as it is a significant change in interrupt behavior. Long, and reentrant, ISRs can clear the I bit prematurely to allow themselves to be interrupted.
Lastly, added the I bit to the exported flags for possible use in memory protection schemes. |
jshamlet |
1600d 14h |
/open8_urisc/trunk/VHDL/o8_rtc.vhd |
209 |
Fixed an issue in the PIT timer that caused an immediate interrupt on interval write,
Fixed an issue in the epoch timer that resulted in a spurious interrupt due to extra LSB's being set by default in the set point register,
While cleaning elsewhere, founding a spacing issue in the CPU HDL,
Added a 4k ROM and MW core. |
jshamlet |
1601d 03h |
/open8_urisc/trunk/VHDL/o8_rtc.vhd |
194 |
Cleaned up licensing sections |
jshamlet |
1609d 09h |
/open8_urisc/trunk/VHDL/o8_rtc.vhd |
191 |
Cleaned up comments, added back the OPEN8_NULLBUS constant, and added some new modules for ADCs and LCD displays.
Also made the button input module more configurable by moving the debounce code to a separate entity and using generics to instantiate it. |
jshamlet |
1609d 09h |
/open8_urisc/trunk/VHDL/o8_rtc.vhd |
190 |
Fixed a bug in CPU where RTI/RTS wasn't idling the instruction cache, causing intermittent failures where RTI would execute as RTS, corrupting the stack;
Fixed a bug in the real-time clock where the uSec tick generator would stop if the PIT timer value was left/set to 0x00. |
jshamlet |
1621d 07h |
/open8_urisc/trunk/VHDL/o8_rtc.vhd |
189 |
Merged changes from private repository,
added ceil_log2 function to Open8_pkg, since it is used to calculate RAM vectors,
cleaned up comments and removed local copies of the ceil_log2 function from peripherals. |
jshamlet |
1622d 08h |
/open8_urisc/trunk/VHDL/o8_rtc.vhd |
177 |
Fixed comments in RTC module |
jshamlet |
2954d 10h |
/open8_urisc/trunk/VHDL/o8_rtc.vhd |
176 |
Fixed documentation errors,
Modified uSec_Tick such that it is always generated regardless of the interval. |
jshamlet |
2959d 07h |
/open8_urisc/trunk/VHDL/o8_rtc.vhd |
172 |
General code cleanup |
jshamlet |
3154d 07h |
/open8_urisc/trunk/VHDL/o8_rtc.vhd |
168 |
Simplified write data path logic,
Converted RTC to packed BCD,
Corrected several bugs in real time clock component, |
jshamlet |
3988d 04h |
/open8_urisc/trunk/VHDL/o8_rtc.vhd |
167 |
Updated CPU model; Pipelined ALU control signals to improve fMAX, corrected issue with interrupt controller priority not being obeyed, fixed bug in auto-indexing instructions where the upper register wasn't being properly incremented, cleaned up code to make the processor model easier to follow.
Added several useful modules that use the Open8 bus. |
jshamlet |
3996d 03h |
/open8_urisc/trunk/VHDL/o8_rtc.vhd |