Rev |
Log message |
Author |
Age |
Path |
263 |
Fixed a very old bug in the CPU core where autoincrements weren't affecting the upper register in the pair, causing it to loop around the lower 256 bytes. This only affected LDX/LDO, as the proper ALU signals were being generated in STO/STX and UPP. Wow, that bug has been in there for AGES.
Also separated the SDLC TX and RX interrupts so that they could be handled separately. |
jshamlet |
1615d 13h |
/open8_urisc/trunk/VHDL/o8_sdlc_if.vhd |
250 |
Removed monitor RAM from SDLC model, as it is now proven to work. |
jshamlet |
1650d 20h |
/open8_urisc/trunk/VHDL/o8_sdlc_if.vhd |
244 |
Added two new generics to the CPU model. The first is a supervisory mode that disables the STP PSR_I instruction. This prevents errant code execution from setting the I bit, and disabling any subsequent memory protection logic. The second allows the default state of the I bit to be set at startup. If set true, initialization code will run with the I bit set, allowing it to bypass memory protection.
Also modified the RAM models to include write mask logic, where the mask register is write-protected by the I bit in the CPU. When enabled, the models will prevent code from writing to memory regions which do not have their mask bits set. The upshot is that code can effectively "write protect" the RAM - which is useful for multitasking applications.
Also, most modules have been updated with write qualification inputs, allowing a similar scheme to be used for I/O, though not as elegantly. I use a register module, whose own write qual line is attached to the external copy of the I bit as an I/O write protect register.
Lastly, added a new externally triggered timer, which can generate pulses with programmable delays and widths, and which can interrupt on either the input trigger, the output rising edge, or output falling edge. The time base can be either the internal microsecond tick signal, or an external clock. |
jshamlet |
1666d 13h |
/open8_urisc/trunk/VHDL/o8_sdlc_if.vhd |
224 |
Finished new Open8 bus record, which now includes the clock, reset and a microsecond tick. The CPU now accepts a clock and pll_locked signal, which it uses to generate the system reset in the bus record. It also contains a simple microsecond counter to feed the usec_tick in the record. This logic was removed from the real time clock and system timer entities, which now use the global version. Bus connections should be dramatically simplified, as only the read logic and interrupts are still run as separate signals. |
jshamlet |
1700d 20h |
/open8_urisc/trunk/VHDL/o8_sdlc_if.vhd |
223 |
Added an OPEN8_BUS_TYPE record to simplify connection to Open8 modules. The CPU now passes and Open8_Bus out, which supplies the bus address, write enable, write data, and read enable. Read data and interrupts are still handled as separate signals, since they are muxed/connected at the next level up. |
jshamlet |
1701d 13h |
/open8_urisc/trunk/VHDL/o8_sdlc_if.vhd |
206 |
Merged interrupt logic with other clocked process. |
jshamlet |
1713d 07h |
/open8_urisc/trunk/VHDL/o8_sdlc_if.vhd |
205 |
More code and comment cleanup for the new SDLC engine |
jshamlet |
1713d 07h |
/open8_urisc/trunk/VHDL/o8_sdlc_if.vhd |
204 |
Fixed more incorrect comments |
jshamlet |
1713d 08h |
/open8_urisc/trunk/VHDL/o8_sdlc_if.vhd |
202 |
Fixed receiver bug that caused false flag detection,
Split the large sdlc_serial_ctrl entity into sub-entities to make debugging easier. |
jshamlet |
1713d 15h |
/open8_urisc/trunk/VHDL/o8_sdlc_if.vhd |
201 |
Fixed comments regarding RX Checksum location |
jshamlet |
1715d 12h |
/open8_urisc/trunk/VHDL/o8_sdlc_if.vhd |
200 |
Renamed dual-port buffer to match other entities. |
jshamlet |
1715d 12h |
/open8_urisc/trunk/VHDL/o8_sdlc_if.vhd |
199 |
Added monitor ram for debugging and fixed issue with dual-port read path. |
jshamlet |
1715d 12h |
/open8_urisc/trunk/VHDL/o8_sdlc_if.vhd |
198 |
Removed debugging memory |
jshamlet |
1715d 20h |
/open8_urisc/trunk/VHDL/o8_sdlc_if.vhd |
196 |
Modified the update logic to allow direct writes to offset 0xFE for refreshing the clock status. This way, any write to the clock status register will immediately be undone. (Writing 0x00 to offset 0xFF is once-more ignored) |
jshamlet |
1715d 21h |
/open8_urisc/trunk/VHDL/o8_sdlc_if.vhd |
192 |
Added SDLC packet engine |
jshamlet |
1716d 17h |
/open8_urisc/trunk/VHDL/o8_sdlc_if.vhd |