OpenCores
URL https://opencores.org/ocsvn/open8_urisc/open8_urisc/trunk

Subversion Repositories open8_urisc

[/] [open8_urisc/] [trunk/] [VHDL/] [o8_sdlc_if.vhd] - Rev 309

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
283 Altered SDLC bitclock check on TX to NOT block when tested by software, but to instead ignore packet write requests if BClk_Okay is low. This allows software to continue checking BClk_Okay in a polling loop. jshamlet 1470d 19h /open8_urisc/trunk/VHDL/o8_sdlc_if.vhd
282 Modified the SDLC core transmit states to have consistent naming. jshamlet 1470d 19h /open8_urisc/trunk/VHDL/o8_sdlc_if.vhd
281 Added pre-initialization to the dual-port RAM signals. jshamlet 1470d 22h /open8_urisc/trunk/VHDL/o8_sdlc_if.vhd
280 Got rid of silly aliases that connected the dual-port memory and the arbitration logic. jshamlet 1470d 23h /open8_urisc/trunk/VHDL/o8_sdlc_if.vhd
278 Flattened the SDLC interface to fewer files and eliminated the package file. jshamlet 1472d 14h /open8_urisc/trunk/VHDL/o8_sdlc_if.vhd
273 Updated comments with corrections jshamlet 1509d 19h /open8_urisc/trunk/VHDL/o8_sdlc_if.vhd
263 Fixed a very old bug in the CPU core where autoincrements weren't affecting the upper register in the pair, causing it to loop around the lower 256 bytes. This only affected LDX/LDO, as the proper ALU signals were being generated in STO/STX and UPP. Wow, that bug has been in there for AGES.

Also separated the SDLC TX and RX interrupts so that they could be handled separately.		 jshamlet 1624d 15h /open8_urisc/trunk/VHDL/o8_sdlc_if.vhd
250 Removed monitor RAM from SDLC model, as it is now proven to work. jshamlet 1659d 22h /open8_urisc/trunk/VHDL/o8_sdlc_if.vhd
244 Added two new generics to the CPU model. The first is a supervisory mode that disables the STP PSR_I instruction. This prevents errant code execution from setting the I bit, and disabling any subsequent memory protection logic. The second allows the default state of the I bit to be set at startup. If set true, initialization code will run with the I bit set, allowing it to bypass memory protection.

Also modified the RAM models to include write mask logic, where the mask register is write-protected by the I bit in the CPU. When enabled, the models will prevent code from writing to memory regions which do not have their mask bits set. The upshot is that code can effectively "write protect" the RAM - which is useful for multitasking applications.

Also, most modules have been updated with write qualification inputs, allowing a similar scheme to be used for I/O, though not as elegantly. I use a register module, whose own write qual line is attached to the external copy of the I bit as an I/O write protect register.

Lastly, added a new externally triggered timer, which can generate pulses with programmable delays and widths, and which can interrupt on either the input trigger, the output rising edge, or output falling edge. The time base can be either the internal microsecond tick signal, or an external clock.		 jshamlet 1675d 16h /open8_urisc/trunk/VHDL/o8_sdlc_if.vhd
224 Finished new Open8 bus record, which now includes the clock, reset and a microsecond tick. The CPU now accepts a clock and pll_locked signal, which it uses to generate the system reset in the bus record. It also contains a simple microsecond counter to feed the usec_tick in the record. This logic was removed from the real time clock and system timer entities, which now use the global version. Bus connections should be dramatically simplified, as only the read logic and interrupts are still run as separate signals. jshamlet 1709d 23h /open8_urisc/trunk/VHDL/o8_sdlc_if.vhd
223 Added an OPEN8_BUS_TYPE record to simplify connection to Open8 modules. The CPU now passes and Open8_Bus out, which supplies the bus address, write enable, write data, and read enable. Read data and interrupts are still handled as separate signals, since they are muxed/connected at the next level up. jshamlet 1710d 16h /open8_urisc/trunk/VHDL/o8_sdlc_if.vhd
206 Merged interrupt logic with other clocked process. jshamlet 1722d 09h /open8_urisc/trunk/VHDL/o8_sdlc_if.vhd
205 More code and comment cleanup for the new SDLC engine jshamlet 1722d 09h /open8_urisc/trunk/VHDL/o8_sdlc_if.vhd
204 Fixed more incorrect comments jshamlet 1722d 10h /open8_urisc/trunk/VHDL/o8_sdlc_if.vhd
202 Fixed receiver bug that caused false flag detection,
Split the large sdlc_serial_ctrl entity into sub-entities to make debugging easier.		 jshamlet 1722d 17h /open8_urisc/trunk/VHDL/o8_sdlc_if.vhd
201 Fixed comments regarding RX Checksum location jshamlet 1724d 14h /open8_urisc/trunk/VHDL/o8_sdlc_if.vhd
200 Renamed dual-port buffer to match other entities. jshamlet 1724d 14h /open8_urisc/trunk/VHDL/o8_sdlc_if.vhd
199 Added monitor ram for debugging and fixed issue with dual-port read path. jshamlet 1724d 15h /open8_urisc/trunk/VHDL/o8_sdlc_if.vhd
198 Removed debugging memory jshamlet 1724d 23h /open8_urisc/trunk/VHDL/o8_sdlc_if.vhd
196 Modified the update logic to allow direct writes to offset 0xFE for refreshing the clock status. This way, any write to the clock status register will immediately be undone. (Writing 0x00 to offset 0xFF is once-more ignored) jshamlet 1724d 23h /open8_urisc/trunk/VHDL/o8_sdlc_if.vhd

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.