URL https://opencores.org/ocsvn/openarty/openarty/trunk

Subversion Repositories openarty

[/] [openarty/] [trunk/] [rtl/] [fastmaster.v] - Rev 44

Rev	Log message	Author	Age	Path
30	Network transmit and MIG memory both work now, though the clock speed has been dropped to 80.125MHz.	dgisselq	3002d 01h	/openarty/trunk/rtl/fastmaster.v
24	Here are the updates from the first (failed) attempt to try to integrate the DDR3 SDRAM controller onto this board.	dgisselq	3057d 01h	/openarty/trunk/rtl/fastmaster.v
17	Fixed the misaddressed I/O peripherals in the fastio peripheral group. In particular, UART and GPS were misaddressed. This has now been fixed, so these peripherals (should) match the spec. Further, the default speed of the two UARTs has been adjusted to 115200/8N1 for the aux UART, and 9600/8N1 for the GPS UART. The Aux UART transmitter also passes testing, so at least that one works.	dgisselq	3069d 00h	/openarty/trunk/rtl/fastmaster.v
13	Here are the updates necessary to get the initial Quad SPI flash driver working. This includes in particular the bus interconnect (in fastmaster.v), and the final hookup to the external wires (in fasttop.v).	dgisselq	3069d 02h	/openarty/trunk/rtl/fastmaster.v
12	A work in progress. This checkin contains fixes for the flash (mostly), together with some logic reductions facilitating full speed (200MHz) build.	dgisselq	3070d 04h	/openarty/trunk/rtl/fastmaster.v
3	Initial set of files. The flash appears to work, memory hasn't been started, the MDIO controller works in simulation, etc. Everything below fasttop.v works at 200MHz (not the CPU---yet).	dgisselq	3085d 08h	/openarty/trunk/rtl/fastmaster.v