| Rev |
Log message |
Author |
Age |
Path |
| 154 |
The serial debug interface now supports the I2C protocol (in addition to the UART) |
olivier.girard |
4428d 11h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
| 134 |
Add full ASIC support (low-power modes, DFT, ...).
Improved serial debug interface reliability. |
olivier.girard |
4635d 11h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
| 117 |
To facilitate commercial adoption of the openMSP430, the core has moved to a modified BSD license. |
olivier.girard |
4908d 12h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
| 111 |
Re-organized the "openMSP430_defines.v" file.
Re-defined the CPU_ID register of the debug interface (in particular to support custom user versioning).
Added RTL configuration possibility to expand the peripheral address space from 512B (0x0000 to 0x0200) to up to 32kB (0x0000 to 0x8000).
As a consequence the per_addr bus width goes from 8 to 14 bits and the peripherals address decoders have been updated accordingly. |
olivier.girard |
4942d 11h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
| 106 |
Separated the Timer A defines from the openMSP430 ones.
Added the "dbg_en" port in order to allow a separate reset of the debug interface.
Added the "core_en" port (when cleared, the CPU will stop execution, the dbg_freeze signal will be set and the aclk & smclk will be stopped).
Renamed "per_wen" to "per_we" to prevent confusion with active low signals.
Removed to missing unused flops when the DBG_EN is not defined (thanks to Mihai contribution). |
olivier.girard |
4998d 09h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
| 105 |
Removed dummy memory read access for the MOV/PUSH/CALL/RETI instructions.
These were not problematic but this is simply cleaner that way. |
olivier.girard |
5013d 10h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
| 103 |
Removed the timescale from all RTL files.
Added possibility to exclude the "includes" statements from the RTL. |
olivier.girard |
5018d 17h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
| 86 |
Update serial debug interface test patterns to make them work with all program memory configurations. |
olivier.girard |
5054d 08h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
| 67 |
Added 16x16 Hardware Multiplier. |
olivier.girard |
5381d 19h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
| 53 |
Fixed the following combinatorial timing loop:
1- irq_detect (omsp_frontend)
2- decode (omsp_frontend)
3- dbg_swbrk (omsp_dbg)
4- halt_flag_set (omsp_dbg)
6- dbg_halt_cmd (omsp_dbg)
7- irq_detect (omsp_frontend)
Without this fix, problem could occur whenever an IRQ request arrives during a software breakpoint instruction fetch. |
olivier.girard |
5420d 13h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
| 34 |
To avoid potential conflicts with other Verilog modules in bigger projects, the openMSP430 sub-modules have all been renamed with the "omsp_" prefix. |
olivier.girard |
5449d 12h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
| 33 |
In order to avoid confusion, the following changes have been implemented to the Verilog code:
- renamed the "rom_*" ports and defines to "pmem_*" (program memory).
- renamed the "ram_*" ports and defines to "dmem_*" (data memory).
In addition, in order to prevent potential conflicts with the Verilog defines of other IPs, a Verilog undefine file has been created. |
olivier.girard |
5449d 13h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
| 23 |
Renamed the "openMSP430.inc" file to "openMSP430_defines.v" & added the "timescale.v" file.
In order to follow the same structure as other OpenCores projects, the timescale and the defines are now included from within the Verilog files (using the `include construct). |
olivier.girard |
5570d 15h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
| 17 |
Updated header with SVN info |
olivier.girard |
5596d 10h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
| 2 |
Upload complete openMSP430 project to the SVN repository |
olivier.girard |
5631d 10h |
/openmsp430/trunk/core/rtl/verilog/openMSP430.v |
