OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [or1200/] [rtl/] [verilog/] [or1200_top.v] - Rev 861

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
859 Execute trapped instruction after breakpoint is removed

Closes bug #104

When the instruction replaced by a trap instruction is restored by the
debugger, this instruction is not executed.

Proposed solution:

- Checked for a debug unstall condition plus a trap condition in
or1200_du(dbg_stall && |except_stop).

- Then, when this event occur, flush the entire pipeline (in or1200_ctrl) and
set the pc to npc in or1200_genpc(which is equal to the trapped instruction
address).

Signed-off-by: Franck Jullien <crevars at opencores.org>
acked-by: Olof Kindgren <olof at opencores.org>		 olof 4114d 18h /openrisc/trunk/or1200/rtl/verilog/or1200_top.v
813 or1200: Set correct PC after reset when parameter boot_adr is used

Signed-off-by: Olof Kindgren <olof@opencores.org>
Acked-by: Julius Baxter <juliusbaxter@gmail.com>		 olof 4396d 21h /openrisc/trunk/or1200/rtl/verilog/or1200_top.v
679 Allow setting the boot address as an external
parameter. If no parameter is used, the value
from OR1200_BOOT_ADR will be used

Signed-off-by: Olof Kindgren <olof@opencores.org>
Acked-by: Julius Baxter <juliusbaxter@gmail.com>		 olof 4599d 20h /openrisc/trunk/or1200/rtl/verilog/or1200_top.v
481 OR1200 Update. RTL and spec. julius 5006d 11h /openrisc/trunk/or1200/rtl/verilog/or1200_top.v
364 OR1200 passes verilator lint. Mainly fixes to widths, and all case statements
altered to casez and Xs changed to ?s.

OR1200 PIC default width back to 31 (was accidentally changed to ORPSoC's 20
last checkin)

OR1200 spec updated to version 0.9, various updates.

OR1200 in ORPSoC and main OR1200 in sync, only difference is defines.		 julius 5134d 20h /openrisc/trunk/or1200/rtl/verilog/or1200_top.v
258 Big OR1200 update - FPU, data cache write-back added, spec updated, ODT format doc now main one, default config set to both caches 8K, all integer arithmetic, FPU off julius 5147d 14h /openrisc/trunk/or1200/rtl/verilog/or1200_top.v
185 Adding single precision FPU to or1200, initial checkin, not fully tested yet julius 5197d 22h /openrisc/trunk/or1200/rtl/verilog/or1200_top.v
142 added OpenRISC version rel3 marcus.erlandsson 5209d 02h /openrisc/trunk/or1200/rtl/verilog/or1200_top.v
10 or1200 added from or1k subversion repository unneback 5610d 06h /openrisc/trunk/or1200/rtl/verilog/or1200_top.v

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.