OpenCores
URL https://opencores.org/ocsvn/sdhc-sc-core/sdhc-sc-core/trunk

Subversion Repositories sdhc-sc-core

[/] [sdhc-sc-core/] [trunk/] [grpSdVerification/] [unitSdVerificationTestbench/] [sim/] [wave.do] - Rev 185

Rev

Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
185 Restructuring as source repository: Moved sources out of src subdirectory. rkastl 5079d 05h /sdhc-sc-core/trunk/grpSdVerification/unitSdVerificationTestbench/sim/wave.do
184 Removed WbSlave shell (refs #69)
Moved verification sources to grpSdVerification (fixes #70)
rkastl 5081d 23h /wave.do
178 Fixed regression:
Testbenches did not support synchronous reset.
rkastl 5081d 23h /wave.do
161 Verification:
CardModel: Check CRC on received data
rkastl 5081d 23h /wave.do
160 Verification:
Full random read and write single blocks sequence works with
checks.
Checking the CRC in the card model is missing.
Writing at addresses above the card size is missing.
Erasing is missing.
rkastl 5081d 23h /wave.do
157 Verification:
Testcase with Reads works but Verification not completly
implemented.
rkastl 5081d 23h /wave.do
153 SdVerification:
further development, not done by far
rkastl 5081d 23h /wave.do
147 Sd-Core:
+ Added checking of Busy signal after write
rkastl 5081d 23h /wave.do
126 Read and Write works in simulation, needs verification.
Synthesis works the same like before.
rkastl 5081d 23h /wave.do
125 Write works in simulation rkastl 5081d 23h /wave.do
124 Write: SdClk is disabled, if no data is available. rkastl 5081d 23h /wave.do
123 Write: Must be able to halt SdClk, rest is done. rkastl 5081d 23h /wave.do
122 SdController: Initial read support rkastl 5082d 03h /wave.do
113 Read with single block works on cards, but not in simulation. SdData.sv
sends data with one "XXXX" cycle right before the crc.
rkastl 5082d 03h /wave.do
111 Sclk moved to neg. edge -> setup and hold times for fast mode are easier
to reach. (only micro sd does not work in fast mode).
rkastl 5082d 03h /wave.do
109 Added a data ram. rkastl 5082d 03h /wave.do
108 Added a ram to the testbed rkastl 5082d 03h /wave.do
106 Fixes #29: All cards respond, but they do not all work. rkastl 5082d 03h /wave.do
105 Changing speed works! refs #33 rkastl 5082d 03h /wave.do
101 Receiving response to ACMD51 works including data, refs #33. rkastl 5082d 03h /wave.do

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.