URL https://opencores.org/ocsvn/usb_dongle_fpga/usb_dongle_fpga/trunk

Subversion Repositories usb_dongle_fpga

[/] [usb_dongle_fpga/] [trunk/] [src/] [design_top/] [design_top_thincandbg.vhd] - Rev 53

Rev	Log message	Author	Age	Path
53	New directory structure.	root	5580d 22h	/usb_dongle_fpga/trunk/src/design_top/design_top_thincandbg.vhd
49	Renamed toplevel entity to suit actual filename and added force 4M window jumper on pins 9,10	nuubik	5622d 21h	/usb_dongle_fpga/trunk/src/design_top/design_top_thincandbg.vhd
35	Fixed postcode nibbles swapped issue added D0 D11 commands for IO port 0x88 (enable/disable memory reads)	nuubik	5941d 23h	/usb_dongle_fpga/trunk/src/design_top/design_top_thincandbg.vhd
26	Added flash_sts status check as flash_sts pin works now (flas_sts had 2 inputs pins what caused it not to work propery now one is highZ output). Added post code logger block and LPC IO write flow control and flash lock when flash is programmed	nuubik	5945d 19h	/usb_dongle_fpga/trunk/src/design_top/design_top_thincandbg.vhd
17	changed version code to 04 and added spy mode by puting jumpers on header and also implemented LPC Firmware Hub read to enable this booting mode (selectable by header jumper see documentation)	nuubik	5959d 23h	/usb_dongle_fpga/trunk/src/design_top/design_top_thincandbg.vhd
15	changed version code to 03 and disabled spy mode on juper setting 00 (this disabled booting but postcode IO write was displayed)	nuubik	6209d 23h	/usb_dongle_fpga/trunk/src/design_top/design_top_thincandbg.vhd
2	Initial global code commit	nuubik	6404d 22h	/usb_dongle_fpga/trunk/src/design_top/design_top_thincandbg.vhd