Rev |
Log message |
Author |
Age |
Path |
38 |
Tag final OpenCores release w11a_V0.74 |
wfjm |
2814d 16h |
/w11/tags/w11a_V0.74/doc/FILES.txt |
31 |
- added TM11/TU10 tape support |
wfjm |
3369d 21h |
/w11/tags/w11a_V0.74/doc/FILES.txt |
30 |
- added RH70/RP/RM big disk support
- many cleanups |
wfjm |
3391d 16h |
/w11/tags/w11a_V0.74/doc/FILES.txt |
29 |
- added support for Vivado
- added support for Nexys4 and Basys3 boards
- added RL11 disk support
- lots of documentation updated |
wfjm |
3457d 14h |
/w11/tags/w11a_V0.74/doc/FILES.txt |
25 |
- The div instruction gave wrong results in some corner cases when either
divisor or quotient were the largest negative integer (100000 or -32768).
This is corrected now, for details see ECO-026-div.txt
- some minor updates and fixes to support scripts
- xtwi usage and XTWI_PATH setup explained in INSTALL.txt |
wfjm |
3668d 19h |
/w11/tags/w11a_V0.74/doc/FILES.txt |
23 |
- major release w11a_V0.60 (tagged)
- after 0.581: documentation updates, no functional changes
- from 0.5 -> 0.6:
- revised ibus and rbus protocol; backend server rewritten; Nexys3 port;
Cypress Fx2 support; LP11,PC11 support |
wfjm |
3733d 11h |
/w11/tags/w11a_V0.74/doc/FILES.txt |
22 |
- interim release w11a_V0.581 (untagged)
- new reference system
- switched from ISE 13.3 to 14.7.
- map/par behaviour changed, unfortunately unfavorably for w11a.
On Nexys3 no timing closure anymore for 80 MHz, only 72 MHz can
be achieved now.
- new man pages (in doc/man/man1/)
- support for Spartan-6 CMTs in PLL and DCM mode |
wfjm |
3741d 12h |
/w11/tags/w11a_V0.74/doc/FILES.txt |
21 |
- interim release w11a_V0.58 (untagged)
- C++ and Tcl based backend server now fully functional, supports with
DL11, RK11, LP11 and PC11 all devices available in w11a designs
- the old perl based backend server (pi_rri) is obsolete and removed
- operating system kits reorganized |
wfjm |
4123d 14h |
/w11/tags/w11a_V0.74/doc/FILES.txt |
20 |
- interim release w11a_V0.57 (untagged)
- new C++ and Tcl based backend server supports now RK11 handling
- w11a systems operate with rlink over USB on nexsy2 and nexsy3 boards.
See w11a_os_guide.txt for details |
wfjm |
4138d 19h |
/w11/tags/w11a_V0.74/doc/FILES.txt |
19 |
- interim release w11a_V0.562 (untagged)
- C++ and Tcl based backend server: many support classes for interfacing to
w11 system designs, and the associated Tcl bindings.
- add 'asm-11', a simple, Macro-11 syntax subset combatible, assembler.
- use now doxygen 1.8.3.1, generate c++,tcl, and vhdl source docs |
wfjm |
4152d 16h |
/w11/tags/w11a_V0.74/doc/FILES.txt |
18 |
- interim release w11a_V0.561 (untagged)
- Added simple simulation model of Cypress FX2 and test benches for
functional verifcation of FX2 controller
- Bugfixes in FX2 firmware and controller, works now also on Nexys3 & Atlys
- Added test systems for rlink over USB verification for Nexys3 & Atlys |
wfjm |
4249d 17h |
/w11/tags/w11a_V0.74/doc/FILES.txt |
17 |
- interim release w11a_V0.56 (untagged)
- re-organized handling of board and derived clocks in test benches
- added message filter definitions for some designs (.mfset files)
- added Cypress EZ-USB FX2 controller (USB interface)
- added firmware for EZ-USB FX2 supporting jtag access and data transfer
- FPGA configure over USB now supported directly in make build flow
- added test systems for USB testing and rlink over USB verification
- no functional change of w11a CPU core or any pre-existing test systems
- Note: Carefully read the disclaimer about usage of USB VID/PID numbers
in the file README_USB-VID-PID.txt. You'll be responsible for any
misuse of the defaults provided with the project sources !! |
wfjm |
4253d 12h |
/w11/tags/w11a_V0.74/doc/FILES.txt |
16 |
- interim release w11a_V0.55 (untagged)
- added xon/xoff (software flow control) support to serport library
- added test systems for serport verification
- use new serport stack in sys_w11a_* and sys_tst_rlink_* systems |
wfjm |
4629d 23h |
/w11/tags/w11a_V0.74/doc/FILES.txt |
15 |
- interim release w11a_V0.54 (untagged)
- add Nexys3 port of w11a |
wfjm |
4648d 12h |
/w11/tags/w11a_V0.74/doc/FILES.txt |
13 |
- interim release w11a_V0.532 (untagged)
- re-organize modules 'human I/O' interface on Digilent boards
- add test designs for 'human I/O' interface for atlys,nexys2, and s3board
- small updates in crc8 and dcm areas
- with one exception all vhdl sources use now numeric_std |
wfjm |
4662d 21h |
/w11/tags/w11a_V0.74/doc/FILES.txt |
12 |
- interim release w11a_V0.531 (untagged)
- many small changes to prepare upcoming support for Spartan-6 and
usage of Cypress FX2 USB interface on nexys2/3 and atlys boards |
wfjm |
4731d 12h |
/w11/tags/w11a_V0.74/doc/FILES.txt |
11 |
- final touch-up for V0.53 minor release |
wfjm |
4879d 21h |
/w11/tags/w11a_V0.74/doc/FILES.txt |
10 |
- add sources for C++/Tcl based backend, add directories
- tools/src/...
- tools/tcl/...
- tools/dox
- tools/make
- add rlink test system
- rtl/sys_gen/tst_rlink/nexys2/... |
wfjm |
4894d 22h |
/w11/tags/w11a_V0.74/doc/FILES.txt |
9 |
- interim release w11a_V0.52 (untagged)
- migrate to rbus protocol verion 3
- reorganize rbus and rlink modules, many renames |
wfjm |
4984d 20h |
/w11/tags/w11a_V0.74/doc/FILES.txt |
8 |
- interim release w11a_V0.51 (untagged)
- migrate to ibus protocol verion 2
- nexys2 systems now with DCM derived system clock supported
- sys_w11a_n2 now runs with 58 MHz clksys |
wfjm |
5020d 10h |
/w11/tags/w11a_V0.74/doc/FILES.txt |