Rev |
Log message |
Author |
Age |
Path |
38 |
Tag final OpenCores release w11a_V0.74 |
wfjm |
2814d 16h |
/w11/tags/w11a_V0.74/rtl/w11a/pdp11_core_rbus.vhd |
37 |
- upgraded CRAM controller, now with 'page mode' support
- new test bench driver tbrun, give automatized test bench execution |
wfjm |
2872d 01h |
/w11/tags/w11a_V0.74/rtl/w11a/pdp11_core_rbus.vhd |
36 |
- Code base cleaned-up for vivado, fsm now inferred
- xsim support complete (but many issues to be resolved yet)
- Added configurable w11a cache
- Removed some never documented and now strategically obsolete designs |
wfjm |
2982d 17h |
/w11/tags/w11a_V0.74/rtl/w11a/pdp11_core_rbus.vhd |
34 |
- Add CPU debug and monitoring units (dmhbpt,dmscnt,dmcmon) |
wfjm |
3161d 13h |
/w11/tags/w11a_V0.74/rtl/w11a/pdp11_core_rbus.vhd |
30 |
- added RH70/RP/RM big disk support
- many cleanups |
wfjm |
3391d 16h |
/w11/tags/w11a_V0.74/rtl/w11a/pdp11_core_rbus.vhd |
29 |
- added support for Vivado
- added support for Nexys4 and Basys3 boards
- added RL11 disk support
- lots of documentation updated |
wfjm |
3457d 14h |
/w11/tags/w11a_V0.74/rtl/w11a/pdp11_core_rbus.vhd |
28 |
- the w11a rbus interface used so far a narrow dynamically adjusted
rbus->ibus window. Replaces with a 4k word window for whole IO page.
- utilize rlink protocol version 4 features in w11a backend
- use attn notifies to dispatch attn handlers
- use larger blocks (7*512 rather 1*512 bytes) for rdma transfers
- use labo and merge csr updates with last block transfer
- this combined reduces the number of round trips by a factor 2 to 3,
and in some cases the throughput accordingly. |
wfjm |
3521d 14h |
/w11/tags/w11a_V0.74/rtl/w11a/pdp11_core_rbus.vhd |
27 |
- migrate to rlink protocol version 4
- Goals for rlink v4
- 16 bit addresses (instead of 8 bit)
- more robust encoding, support for error recovery at transport level
- add features to reduce round trips
- improved attention handling
- new 'list abort' command
- For further details see README_Rlink_V4.txt
- use own C++ based tcl shell tclshcpp instead of tclsh |
wfjm |
3536d 16h |
/w11/tags/w11a_V0.74/rtl/w11a/pdp11_core_rbus.vhd |
22 |
- interim release w11a_V0.581 (untagged)
- new reference system
- switched from ISE 13.3 to 14.7.
- map/par behaviour changed, unfortunately unfavorably for w11a.
On Nexys3 no timing closure anymore for 80 MHz, only 72 MHz can
be achieved now.
- new man pages (in doc/man/man1/)
- support for Spartan-6 CMTs in PLL and DCM mode |
wfjm |
3741d 12h |
/w11/tags/w11a_V0.74/rtl/w11a/pdp11_core_rbus.vhd |
13 |
- interim release w11a_V0.532 (untagged)
- re-organize modules 'human I/O' interface on Digilent boards
- add test designs for 'human I/O' interface for atlys,nexys2, and s3board
- small updates in crc8 and dcm areas
- with one exception all vhdl sources use now numeric_std |
wfjm |
4662d 21h |
/w11/tags/w11a_V0.74/rtl/w11a/pdp11_core_rbus.vhd |
9 |
- interim release w11a_V0.52 (untagged)
- migrate to rbus protocol verion 3
- reorganize rbus and rlink modules, many renames |
wfjm |
4984d 19h |
/w11/tags/w11a_V0.74/rtl/w11a/pdp11_core_rbus.vhd |
8 |
- interim release w11a_V0.51 (untagged)
- migrate to ibus protocol verion 2
- nexys2 systems now with DCM derived system clock supported
- sys_w11a_n2 now runs with 58 MHz clksys |
wfjm |
5020d 10h |
/w11/tags/w11a_V0.74/rtl/w11a/pdp11_core_rbus.vhd |
2 |
initial source upload (no docs yet) |
wfjm |
5161d 15h |
/w11/tags/w11a_V0.74/rtl/w11a/pdp11_core_rbus.vhd |