OpenCores
URL https://opencores.org/ocsvn/w11/w11/trunk

Subversion Repositories w11

[/] [w11/] [tags/] [w11a_V0.74/] [tools/] [src/] [librlink/] [Makefile] - Rev 38

Rev

Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
38 Tag final OpenCores release w11a_V0.74 wfjm 2781d 07h /w11/tags/w11a_V0.74/tools/src/librlink/Makefile
35 - Add Arty support (BRAM only)
- Add sysmon/xadc support (for nexys4,basys3,arty designs)
- Add Vivado simulator support (DPI not yet working)		 wfjm 3048d 09h /w11/tags/w11a_V0.74/tools/src/librlink/Makefile
27 - migrate to rlink protocol version 4
- Goals for rlink v4
- 16 bit addresses (instead of 8 bit)
- more robust encoding, support for error recovery at transport level
- add features to reduce round trips
- improved attention handling
- new 'list abort' command
- For further details see README_Rlink_V4.txt
- use own C++ based tcl shell tclshcpp instead of tclsh		 wfjm 3503d 08h /w11/tags/w11a_V0.74/tools/src/librlink/Makefile
22 - interim release w11a_V0.581 (untagged)
- new reference system
- switched from ISE 13.3 to 14.7.
- map/par behaviour changed, unfortunately unfavorably for w11a.
On Nexys3 no timing closure anymore for 80 MHz, only 72 MHz can
be achieved now.
- new man pages (in doc/man/man1/)
- support for Spartan-6 CMTs in PLL and DCM mode		 wfjm 3708d 03h /w11/tags/w11a_V0.74/tools/src/librlink/Makefile
19 - interim release w11a_V0.562 (untagged)
- C++ and Tcl based backend server: many support classes for interfacing to
w11 system designs, and the associated Tcl bindings.
- add 'asm-11', a simple, Macro-11 syntax subset combatible, assembler.
- use now doxygen 1.8.3.1, generate c++,tcl, and vhdl source docs		 wfjm 4119d 08h /w11/tags/w11a_V0.74/tools/src/librlink/Makefile
17 - interim release w11a_V0.56 (untagged)
- re-organized handling of board and derived clocks in test benches
- added message filter definitions for some designs (.mfset files)
- added Cypress EZ-USB FX2 controller (USB interface)
- added firmware for EZ-USB FX2 supporting jtag access and data transfer
- FPGA configure over USB now supported directly in make build flow
- added test systems for USB testing and rlink over USB verification
- no functional change of w11a CPU core or any pre-existing test systems
- Note: Carefully read the disclaimer about usage of USB VID/PID numbers
in the file README_USB-VID-PID.txt. You'll be responsible for any
misuse of the defaults provided with the project sources !!		 wfjm 4220d 04h /w11/tags/w11a_V0.74/tools/src/librlink/Makefile
12 - interim release w11a_V0.531 (untagged)
- many small changes to prepare upcoming support for Spartan-6 and
usage of Cypress FX2 USB interface on nexys2/3 and atlys boards		 wfjm 4698d 04h /w11/tags/w11a_V0.74/tools/src/librlink/Makefile
10 - add sources for C++/Tcl based backend, add directories
- tools/src/...
- tools/tcl/...
- tools/dox
- tools/make
- add rlink test system
- rtl/sys_gen/tst_rlink/nexys2/...		 wfjm 4861d 14h /w11/tags/w11a_V0.74/tools/src/librlink/Makefile

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.