OpenCores
URL https://opencores.org/ocsvn/System09/System09/trunk

Subversion Repositories System09

[/] - Rev 181

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
181 Add a copy of the derived ROM contents so that you can go directly to ISE GUI without having to 'make roms' davidgb 1279d 10h /
180 removed xdc file since ISE 14.7 does not support XDC davidgb 1279d 11h /
179 Zybo port done to the same point as the Atlys port. The hardware appears to work but the ACIA is not communicating properly. davidgb 1279d 11h /
178 work on constraints file davidgb 1279d 22h /
177 work on zybo port davidgb 1279d 23h /
176 Don't delete system09_impact.cmd on 'clean' davidgb 1280d 00h /
175 Corrected RS-232 pin connections. Cleaned up code. Removed debug code.
System boots but the baud clock must be wrong - get garbage on hyperterm.
davidgb 1280d 00h /
174 Added button debounce. Single-step button. multiplex LED to show nibbles of addr and data for debug. Confirmed that CPU is reading from sys09swt.vhd SBug ROM correctly. Still need to debug ACIA output. davidgb 1280d 03h /
173 Add another 16k BRAM for 56K total memory davidgb 1281d 23h /
172 Add 16k RAM davidgb 1281d 23h /
171 remove old Xess files davidgb 1282d 04h /
170 More debugging. Can now see cpu_addr incrementing correctly.
Added 32k BRAM 0000-7FFF.
davidgb 1282d 04h /
169 Fixed clock connection and reset button polarity. Debug LED counting and cpu_clk now indicates some activity. davidgb 1282d 10h /
168 Added more pinloc info. Switched RS-232 to use PMOD connector for more h/w debug visibility. davidgb 1282d 10h /
167 Update MAP_FLAGS for z20. Update UCF to have Pmod JC for the RS-232 Pmod davidgb 1282d 23h /
166 hack some pin locs. davidgb 1282d 23h /
165 initial checkin for zybo z20. Still need to fix ucf file. davidgb 1282d 23h /
164 work on impact support davidgb 1283d 00h /
163 more directory cleanup davidgb 1283d 00h /
162 stripped down to most basic system (no vdu, keyboard, sdram, ide, etc). davidgb 1283d 00h /
161 more work on makefile for atlys davidgb 1283d 05h /
160 impact command file for atlys davidgb 1283d 05h /
159 remove Xess tool references. davidgb 1283d 05h /
158 switch to stock SWT boot rom and flex9ram davidgb 1283d 05h /
157 Switch to stock SWT boot rom and flex9ram davidgb 1283d 05h /
156 clean up webtalk file davidgb 1283d 05h /
155 remove dependency for impact davidgb 1283d 05h /
154 Made sure "END START" line is complete so ASMB will apply the transfer address davidgb 1285d 00h /
153 Add assembler code for XSEND and XRECV xmodem transfer programs davidgb 1286d 00h /
152 More atlys cleanup davidgb 1526d 14h /

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.