URL https://opencores.org/ocsvn/System09/System09/trunk

Subversion Repositories System09

[/] - Rev 202

Filtering Options

From rev	To rev	Max revs

Search for

Rev	Log message	Author	Age	Path
202	Updated Zybo design to reintroduce VDU8 driving the PmodVGA on pmod connectors JC+JD. This version also uses PmodUSBUART on JE. To use PmodRS232 you must edit the .ucf file and select the appropriate pin LOCs.	davidgb	1160d 18h	/
201	A copy of XSA-3S1000.ucf and System09_Xess_XSA-3S1000.vhd that have dual serial ports with no handshake.	davidgb	1167d 12h	/
200	Started adding back in video support - VDU8 instantiated and RGBHV bits sent to Pmod JE port.	davidgb	1174d 10h	/
199	Add in full RS-232 handshake for PmodUSBUART.	davidgb	1175d 11h	/
198	Update UCF file to select Pmod pinout compatible with the PmodUSBUART. To use, make sure PmodUSBUART has JP1 as "LCL". Connect the usb to the uart and open the terminal program. Test the transmission via the LED on the Pmod. Then (carefully) plug into Pmod port on Zybo.	davidgb	1175d 12h	/
197	Updates from John Kent: -- 4.5 John Kent 2012-02-04 Re-arranged Rx & Tx Baud clock edge detect. -- 4.6 John Kent 3021-01-30 Double sample RxC, TxC, and RxD with cpu_clk -- for 125MHz Clock on Zybo Z7 board.	davidgb	1182d 09h	/
196	Working system boots to SBUG. Uses RS232 Pmod (no handshake) and 57600,8,N,1 (no handshake) hyperterm.	davidgb	1182d 09h	/
195	Switched to using the UART over usb for the console port.	davidgb	1182d 10h	/
194	Finally have a working board.	davidgb	1182d 10h	/
193	Fixed part of the ACIA problem - the polarity of the NMI was wrong. Now get clean output but input to the ACIA is not working. Also fixed the 32k addressing	davidgb	1182d 14h	/
192	Fixed part of the ACIA problem - the polarity of the NMI was wrong. Now get clean output but input to the ACIA is not working.	davidgb	1182d 14h	/
191	check in file so that you do not need to generate it when running ISE in gui	davidgb	1183d 11h	/
190	check in file so that you do not need to generate it when running ISE in gui	davidgb	1183d 11h	/
189	Remove unused file. Created by ISE gui.	davidgb	1189d 05h	/
188	update options to match what the ISE gui does	davidgb	1189d 05h	/
187	Partially works. Garbage on the ACIA due to baud clock problems.	davidgb	1189d 10h	/
186	Somewhat functional boot to SBUG. ACIA freq is wrong but sometimes works if hyperterm set to 115kBps	davidgb	1189d 13h	/
185	Reverted back to the single-step version - something was broken	davidgb	1189d 15h	/
184	update files to correctly produce flex9ram.vhd	davidgb	1189d 15h	/
183	update file extensions	davidgb	1189d 15h	/

1 2 Next >

Show All

Browse

Tools

Subversion Repositories System09

[/] - Rev 202

Filtering Options