URL https://opencores.org/ocsvn/System09/System09/trunk

Subversion Repositories System09

[/] - Rev 208

Filtering Options

From rev	To rev	Max revs

Search for

Rev	Log message	Author	Age	Path
208	swapped 32k and 16k ram to use block_spram.	davidgb	1177d 05h	/
207	Updated design to pick up vdu8_spram (which uses parameterized ram for video memory instead of hard macros)	davidgb	1177d 05h	/
206	Update comment/cleanup	davidgb	1177d 05h	/
205	A new version of VDU8 that uses the parameterized xilinx ram "block_spram" for the video memory.	davidgb	1177d 06h	/
204	patched up ram for zybo use	davidgb	1177d 06h	/
203	Added a parameterized ram model.	davidgb	1177d 06h	/
202	Updated Zybo design to reintroduce VDU8 driving the PmodVGA on pmod connectors JC+JD. This version also uses PmodUSBUART on JE. To use PmodRS232 you must edit the .ucf file and select the appropriate pin LOCs.	davidgb	1177d 07h	/
201	A copy of XSA-3S1000.ucf and System09_Xess_XSA-3S1000.vhd that have dual serial ports with no handshake.	davidgb	1184d 01h	/
200	Started adding back in video support - VDU8 instantiated and RGBHV bits sent to Pmod JE port.	davidgb	1190d 22h	/
199	Add in full RS-232 handshake for PmodUSBUART.	davidgb	1192d 00h	/
198	Update UCF file to select Pmod pinout compatible with the PmodUSBUART. To use, make sure PmodUSBUART has JP1 as "LCL". Connect the usb to the uart and open the terminal program. Test the transmission via the LED on the Pmod. Then (carefully) plug into Pmod port on Zybo.	davidgb	1192d 01h	/
197	Updates from John Kent: -- 4.5 John Kent 2012-02-04 Re-arranged Rx & Tx Baud clock edge detect. -- 4.6 John Kent 3021-01-30 Double sample RxC, TxC, and RxD with cpu_clk -- for 125MHz Clock on Zybo Z7 board.	davidgb	1198d 22h	/
196	Working system boots to SBUG. Uses RS232 Pmod (no handshake) and 57600,8,N,1 (no handshake) hyperterm.	davidgb	1198d 22h	/
195	Switched to using the UART over usb for the console port.	davidgb	1198d 23h	/
194	Finally have a working board.	davidgb	1198d 23h	/
193	Fixed part of the ACIA problem - the polarity of the NMI was wrong. Now get clean output but input to the ACIA is not working. Also fixed the 32k addressing	davidgb	1199d 03h	/
192	Fixed part of the ACIA problem - the polarity of the NMI was wrong. Now get clean output but input to the ACIA is not working.	davidgb	1199d 03h	/
191	check in file so that you do not need to generate it when running ISE in gui	davidgb	1200d 00h	/
190	check in file so that you do not need to generate it when running ISE in gui	davidgb	1200d 00h	/
189	Remove unused file. Created by ISE gui.	davidgb	1205d 18h	/

1 2 Next >

Show All

Browse

Tools

Subversion Repositories System09

[/] - Rev 208

Filtering Options