URL https://opencores.org/ocsvn/System09/System09/trunk

Subversion Repositories System09

[/] - Rev 218

Rev	Log message	Author	Age	Path
198	Update UCF file to select Pmod pinout compatible with the PmodUSBUART. To use, make sure PmodUSBUART has JP1 as "LCL". Connect the usb to the uart and open the terminal program. Test the transmission via the LED on the Pmod. Then (carefully) plug into Pmod port on Zybo.	davidgb	1184d 06h	/
197	Updates from John Kent: -- 4.5 John Kent 2012-02-04 Re-arranged Rx & Tx Baud clock edge detect. -- 4.6 John Kent 3021-01-30 Double sample RxC, TxC, and RxD with cpu_clk -- for 125MHz Clock on Zybo Z7 board.	davidgb	1191d 03h	/
196	Working system boots to SBUG. Uses RS232 Pmod (no handshake) and 57600,8,N,1 (no handshake) hyperterm.	davidgb	1191d 03h	/
195	Switched to using the UART over usb for the console port.	davidgb	1191d 04h	/
194	Finally have a working board.	davidgb	1191d 04h	/
193	Fixed part of the ACIA problem - the polarity of the NMI was wrong. Now get clean output but input to the ACIA is not working. Also fixed the 32k addressing	davidgb	1191d 08h	/
192	Fixed part of the ACIA problem - the polarity of the NMI was wrong. Now get clean output but input to the ACIA is not working.	davidgb	1191d 08h	/
191	check in file so that you do not need to generate it when running ISE in gui	davidgb	1192d 05h	/
190	check in file so that you do not need to generate it when running ISE in gui	davidgb	1192d 05h	/
189	Remove unused file. Created by ISE gui.	davidgb	1197d 23h	/