OpenCores
URL https://opencores.org/ocsvn/System09/System09/trunk

Subversion Repositories System09

[/] [System09/] [trunk/] - Rev 186

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
186 Somewhat functional boot to SBUG. ACIA freq is wrong but sometimes works if hyperterm set to 115kBps davidgb 1221d 05h /System09/trunk
185 Reverted back to the single-step version - something was broken davidgb 1221d 06h /System09/trunk
184 update files to correctly produce flex9ram.vhd davidgb 1221d 06h /System09/trunk
183 update file extensions davidgb 1221d 06h /System09/trunk
182 Add a copy of the derived ROM contents so that you can go directly to ISE GUI without having to 'make roms' davidgb 1221d 06h /System09/trunk
181 Add a copy of the derived ROM contents so that you can go directly to ISE GUI without having to 'make roms' davidgb 1221d 06h /System09/trunk
180 removed xdc file since ISE 14.7 does not support XDC davidgb 1221d 07h /System09/trunk
179 Zybo port done to the same point as the Atlys port. The hardware appears to work but the ACIA is not communicating properly. davidgb 1221d 07h /System09/trunk
178 work on constraints file davidgb 1221d 19h /System09/trunk
177 work on zybo port davidgb 1221d 19h /System09/trunk
176 Don't delete system09_impact.cmd on 'clean' davidgb 1221d 20h /System09/trunk
175 Corrected RS-232 pin connections. Cleaned up code. Removed debug code.
System boots but the baud clock must be wrong - get garbage on hyperterm.		 davidgb 1221d 20h /System09/trunk
174 Added button debounce. Single-step button. multiplex LED to show nibbles of addr and data for debug. Confirmed that CPU is reading from sys09swt.vhd SBug ROM correctly. Still need to debug ACIA output. davidgb 1222d 00h /System09/trunk
173 Add another 16k BRAM for 56K total memory davidgb 1223d 19h /System09/trunk
172 Add 16k RAM davidgb 1223d 19h /System09/trunk
171 remove old Xess files davidgb 1224d 01h /System09/trunk
170 More debugging. Can now see cpu_addr incrementing correctly.
Added 32k BRAM 0000-7FFF.		 davidgb 1224d 01h /System09/trunk
169 Fixed clock connection and reset button polarity. Debug LED counting and cpu_clk now indicates some activity. davidgb 1224d 06h /System09/trunk
168 Added more pinloc info. Switched RS-232 to use PMOD connector for more h/w debug visibility. davidgb 1224d 07h /System09/trunk
167 Update MAP_FLAGS for z20. Update UCF to have Pmod JC for the RS-232 Pmod davidgb 1224d 19h /System09/trunk

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.