OpenCores
URL https://opencores.org/ocsvn/System09/System09/trunk

Subversion Repositories System09

[/] [System09/] [trunk/] - Rev 201

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
201 A copy of XSA-3S1000.ucf and System09_Xess_XSA-3S1000.vhd that have dual serial ports with no handshake. davidgb 597d 00h /System09/trunk/
200 Started adding back in video support - VDU8 instantiated and RGBHV bits sent to Pmod JE port. davidgb 603d 22h /System09/trunk/
199 Add in full RS-232 handshake for PmodUSBUART. davidgb 604d 23h /System09/trunk/
198 Update UCF file to select Pmod pinout compatible with the PmodUSBUART.
To use, make sure PmodUSBUART has JP1 as "LCL". Connect the usb to the uart and open the terminal program. Test the transmission via the LED on the Pmod. Then (carefully) plug into Pmod port on Zybo.
davidgb 605d 00h /System09/trunk/
197 Updates from John Kent:
-- 4.5 John Kent 2012-02-04 Re-arranged Rx & Tx Baud clock edge detect.
-- 4.6 John Kent 3021-01-30 Double sample RxC, TxC, and RxD with cpu_clk
-- for 125MHz Clock on Zybo Z7 board.
davidgb 611d 22h /System09/trunk/
196 Working system boots to SBUG. Uses RS232 Pmod (no handshake) and 57600,8,N,1 (no handshake) hyperterm. davidgb 611d 22h /System09/trunk/
195 Switched to using the UART over usb for the console port. davidgb 611d 22h /System09/trunk/
194 Finally have a working board. davidgb 611d 23h /System09/trunk/
193 Fixed part of the ACIA problem - the polarity of the NMI was wrong. Now get clean output but input to the ACIA is not working. Also fixed the 32k addressing davidgb 612d 02h /System09/trunk/
192 Fixed part of the ACIA problem - the polarity of the NMI was wrong. Now get clean output but input to the ACIA is not working. davidgb 612d 02h /System09/trunk/
191 check in file so that you do not need to generate it when running ISE in gui davidgb 612d 23h /System09/trunk/
190 check in file so that you do not need to generate it when running ISE in gui davidgb 612d 23h /System09/trunk/
189 Remove unused file. Created by ISE gui. davidgb 618d 17h /System09/trunk/
188 update options to match what the ISE gui does davidgb 618d 18h /System09/trunk/
187 Partially works. Garbage on the ACIA due to baud clock problems. davidgb 618d 23h /System09/trunk/
186 Somewhat functional boot to SBUG. ACIA freq is wrong but sometimes works if hyperterm set to 115kBps davidgb 619d 02h /System09/trunk/
185 Reverted back to the single-step version - something was broken davidgb 619d 03h /System09/trunk/
184 update files to correctly produce flex9ram.vhd davidgb 619d 03h /System09/trunk/
183 update file extensions davidgb 619d 03h /System09/trunk/
182 Add a copy of the derived ROM contents so that you can go directly to ISE GUI without having to 'make roms' davidgb 619d 03h /System09/trunk/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2022 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.