OpenCores
URL https://opencores.org/ocsvn/System09/System09/trunk

Subversion Repositories System09

[/] [System09/] [trunk/] [rtl/] - Rev 188

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
188 update options to match what the ISE gui does davidgb 1181d 19h /System09/trunk/rtl/
187 Partially works. Garbage on the ACIA due to baud clock problems. davidgb 1182d 00h /System09/trunk/rtl/
186 Somewhat functional boot to SBUG. ACIA freq is wrong but sometimes works if hyperterm set to 115kBps davidgb 1182d 03h /System09/trunk/rtl/
185 Reverted back to the single-step version - something was broken davidgb 1182d 05h /System09/trunk/rtl/
180 removed xdc file since ISE 14.7 does not support XDC davidgb 1182d 06h /System09/trunk/rtl/
179 Zybo port done to the same point as the Atlys port. The hardware appears to work but the ACIA is not communicating properly. davidgb 1182d 06h /System09/trunk/rtl/
178 work on constraints file davidgb 1182d 17h /System09/trunk/rtl/
177 work on zybo port davidgb 1182d 17h /System09/trunk/rtl/
176 Don't delete system09_impact.cmd on 'clean' davidgb 1182d 19h /System09/trunk/rtl/
175 Corrected RS-232 pin connections. Cleaned up code. Removed debug code.
System boots but the baud clock must be wrong - get garbage on hyperterm.		 davidgb 1182d 19h /System09/trunk/rtl/
174 Added button debounce. Single-step button. multiplex LED to show nibbles of addr and data for debug. Confirmed that CPU is reading from sys09swt.vhd SBug ROM correctly. Still need to debug ACIA output. davidgb 1182d 22h /System09/trunk/rtl/
173 Add another 16k BRAM for 56K total memory davidgb 1184d 18h /System09/trunk/rtl/
172 Add 16k RAM davidgb 1184d 18h /System09/trunk/rtl/
171 remove old Xess files davidgb 1184d 23h /System09/trunk/rtl/
170 More debugging. Can now see cpu_addr incrementing correctly.
Added 32k BRAM 0000-7FFF.		 davidgb 1184d 23h /System09/trunk/rtl/
169 Fixed clock connection and reset button polarity. Debug LED counting and cpu_clk now indicates some activity. davidgb 1185d 05h /System09/trunk/rtl/
168 Added more pinloc info. Switched RS-232 to use PMOD connector for more h/w debug visibility. davidgb 1185d 05h /System09/trunk/rtl/
167 Update MAP_FLAGS for z20. Update UCF to have Pmod JC for the RS-232 Pmod davidgb 1185d 18h /System09/trunk/rtl/
166 hack some pin locs. davidgb 1185d 18h /System09/trunk/rtl/
165 initial checkin for zybo z20. Still need to fix ucf file. davidgb 1185d 18h /System09/trunk/rtl/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.