OpenCores
URL https://opencores.org/ocsvn/System09/System09/trunk

Subversion Repositories System09

[/] [System09/] [trunk/] [rtl/] - Rev 195

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
195 Switched to using the UART over usb for the console port. davidgb 1204d 07h /System09/trunk/rtl
194 Finally have a working board. davidgb 1204d 08h /System09/trunk/rtl
193 Fixed part of the ACIA problem - the polarity of the NMI was wrong. Now get clean output but input to the ACIA is not working. Also fixed the 32k addressing davidgb 1204d 11h /System09/trunk/rtl
192 Fixed part of the ACIA problem - the polarity of the NMI was wrong. Now get clean output but input to the ACIA is not working. davidgb 1204d 11h /System09/trunk/rtl
189 Remove unused file. Created by ISE gui. davidgb 1211d 02h /System09/trunk/rtl
188 update options to match what the ISE gui does davidgb 1211d 03h /System09/trunk/rtl
187 Partially works. Garbage on the ACIA due to baud clock problems. davidgb 1211d 08h /System09/trunk/rtl
186 Somewhat functional boot to SBUG. ACIA freq is wrong but sometimes works if hyperterm set to 115kBps davidgb 1211d 11h /System09/trunk/rtl
185 Reverted back to the single-step version - something was broken davidgb 1211d 12h /System09/trunk/rtl
180 removed xdc file since ISE 14.7 does not support XDC davidgb 1211d 13h /System09/trunk/rtl
179 Zybo port done to the same point as the Atlys port. The hardware appears to work but the ACIA is not communicating properly. davidgb 1211d 13h /System09/trunk/rtl
178 work on constraints file davidgb 1212d 01h /System09/trunk/rtl
177 work on zybo port davidgb 1212d 01h /System09/trunk/rtl
176 Don't delete system09_impact.cmd on 'clean' davidgb 1212d 02h /System09/trunk/rtl
175 Corrected RS-232 pin connections. Cleaned up code. Removed debug code.
System boots but the baud clock must be wrong - get garbage on hyperterm.		 davidgb 1212d 02h /System09/trunk/rtl
174 Added button debounce. Single-step button. multiplex LED to show nibbles of addr and data for debug. Confirmed that CPU is reading from sys09swt.vhd SBug ROM correctly. Still need to debug ACIA output. davidgb 1212d 06h /System09/trunk/rtl
173 Add another 16k BRAM for 56K total memory davidgb 1214d 01h /System09/trunk/rtl
172 Add 16k RAM davidgb 1214d 01h /System09/trunk/rtl
171 remove old Xess files davidgb 1214d 07h /System09/trunk/rtl
170 More debugging. Can now see cpu_addr incrementing correctly.
Added 32k BRAM 0000-7FFF.		 davidgb 1214d 07h /System09/trunk/rtl

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.