OpenCores
URL https://opencores.org/ocsvn/System09/System09/trunk

Subversion Repositories System09

[/] [System09/] [trunk/] [rtl/] - Rev 199

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
199 Add in full RS-232 handshake for PmodUSBUART. davidgb 1596d 23h /System09/trunk/rtl/
198 Update UCF file to select Pmod pinout compatible with the PmodUSBUART.
To use, make sure PmodUSBUART has JP1 as "LCL". Connect the usb to the uart and open the terminal program. Test the transmission via the LED on the Pmod. Then (carefully) plug into Pmod port on Zybo.		 davidgb 1597d 00h /System09/trunk/rtl/
197 Updates from John Kent:
-- 4.5 John Kent 2012-02-04 Re-arranged Rx & Tx Baud clock edge detect.
-- 4.6 John Kent 3021-01-30 Double sample RxC, TxC, and RxD with cpu_clk
-- for 125MHz Clock on Zybo Z7 board.		 davidgb 1603d 21h /System09/trunk/rtl/
196 Working system boots to SBUG. Uses RS232 Pmod (no handshake) and 57600,8,N,1 (no handshake) hyperterm. davidgb 1603d 22h /System09/trunk/rtl/
195 Switched to using the UART over usb for the console port. davidgb 1603d 22h /System09/trunk/rtl/
194 Finally have a working board. davidgb 1603d 22h /System09/trunk/rtl/
193 Fixed part of the ACIA problem - the polarity of the NMI was wrong. Now get clean output but input to the ACIA is not working. Also fixed the 32k addressing davidgb 1604d 02h /System09/trunk/rtl/
192 Fixed part of the ACIA problem - the polarity of the NMI was wrong. Now get clean output but input to the ACIA is not working. davidgb 1604d 02h /System09/trunk/rtl/
189 Remove unused file. Created by ISE gui. davidgb 1610d 17h /System09/trunk/rtl/
188 update options to match what the ISE gui does davidgb 1610d 17h /System09/trunk/rtl/
187 Partially works. Garbage on the ACIA due to baud clock problems. davidgb 1610d 22h /System09/trunk/rtl/
186 Somewhat functional boot to SBUG. ACIA freq is wrong but sometimes works if hyperterm set to 115kBps davidgb 1611d 02h /System09/trunk/rtl/
185 Reverted back to the single-step version - something was broken davidgb 1611d 03h /System09/trunk/rtl/
180 removed xdc file since ISE 14.7 does not support XDC davidgb 1611d 04h /System09/trunk/rtl/
179 Zybo port done to the same point as the Atlys port. The hardware appears to work but the ACIA is not communicating properly. davidgb 1611d 04h /System09/trunk/rtl/
178 work on constraints file davidgb 1611d 15h /System09/trunk/rtl/
177 work on zybo port davidgb 1611d 16h /System09/trunk/rtl/
176 Don't delete system09_impact.cmd on 'clean' davidgb 1611d 17h /System09/trunk/rtl/
175 Corrected RS-232 pin connections. Cleaned up code. Removed debug code.
System boots but the baud clock must be wrong - get garbage on hyperterm.		 davidgb 1611d 17h /System09/trunk/rtl/
174 Added button debounce. Single-step button. multiplex LED to show nibbles of addr and data for debug. Confirmed that CPU is reading from sys09swt.vhd SBug ROM correctly. Still need to debug ACIA output. davidgb 1611d 21h /System09/trunk/rtl/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2025 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.