URL https://opencores.org/ocsvn/System09/System09/trunk

Subversion Repositories System09

[/] [System09] - Rev 218

Rev	Log message	Author	Age	Path
198	Update UCF file to select Pmod pinout compatible with the PmodUSBUART. To use, make sure PmodUSBUART has JP1 as "LCL". Connect the usb to the uart and open the terminal program. Test the transmission via the LED on the Pmod. Then (carefully) plug into Pmod port on Zybo.	davidgb	1183d 00h	/System09
197	Updates from John Kent: -- 4.5 John Kent 2012-02-04 Re-arranged Rx & Tx Baud clock edge detect. -- 4.6 John Kent 3021-01-30 Double sample RxC, TxC, and RxD with cpu_clk -- for 125MHz Clock on Zybo Z7 board.	davidgb	1189d 21h	/System09
196	Working system boots to SBUG. Uses RS232 Pmod (no handshake) and 57600,8,N,1 (no handshake) hyperterm.	davidgb	1189d 21h	/System09
195	Switched to using the UART over usb for the console port.	davidgb	1189d 22h	/System09
194	Finally have a working board.	davidgb	1189d 22h	/System09
193	Fixed part of the ACIA problem - the polarity of the NMI was wrong. Now get clean output but input to the ACIA is not working. Also fixed the 32k addressing	davidgb	1190d 01h	/System09
192	Fixed part of the ACIA problem - the polarity of the NMI was wrong. Now get clean output but input to the ACIA is not working.	davidgb	1190d 02h	/System09
191	check in file so that you do not need to generate it when running ISE in gui	davidgb	1190d 22h	/System09
190	check in file so that you do not need to generate it when running ISE in gui	davidgb	1190d 22h	/System09
189	Remove unused file. Created by ISE gui.	davidgb	1196d 16h	/System09