OpenCores
URL https://opencores.org/ocsvn/System09/System09/trunk

Subversion Repositories System09

[/] - Rev 212

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
212 Switched from VGA output to HDMI output. davidgb 1137d 23h /
211 New version of VDU8 that has HDMI output. Still needs work refactoring clock signals. davidgb 1137d 23h /
210 Check in code fragment implementing HDMI/TMDS encoding.
Derived from HDMI_test.v https://www.fpga4fun.com/HDMI.html (c) fpga4fun.com & KNJN LLC 2013		 davidgb 1137d 23h /
209 Started adding in keyboard (not tested).
Added in green-only VGA output thru Pmod port to PmodVGA J2 port.
Started working on HDMI output		 davidgb 1138d 01h /
208 swapped 32k and 16k ram to use block_spram. davidgb 1182d 02h /
207 Updated design to pick up vdu8_spram (which uses parameterized ram for video memory instead of hard macros) davidgb 1182d 03h /
206 Update comment/cleanup davidgb 1182d 03h /
205 A new version of VDU8 that uses the parameterized xilinx ram "block_spram" for the video memory. davidgb 1182d 03h /
204 patched up ram for zybo use davidgb 1182d 03h /
203 Added a parameterized ram model. davidgb 1182d 03h /
202 Updated Zybo design to reintroduce VDU8 driving the PmodVGA on pmod connectors JC+JD.
This version also uses PmodUSBUART on JE. To use PmodRS232 you must edit the .ucf file and select the appropriate pin LOCs.		 davidgb 1182d 04h /
201 A copy of XSA-3S1000.ucf and System09_Xess_XSA-3S1000.vhd that have dual serial ports with no handshake. davidgb 1188d 22h /
200 Started adding back in video support - VDU8 instantiated and RGBHV bits sent to Pmod JE port. davidgb 1195d 20h /
199 Add in full RS-232 handshake for PmodUSBUART. davidgb 1196d 21h /
198 Update UCF file to select Pmod pinout compatible with the PmodUSBUART.
To use, make sure PmodUSBUART has JP1 as "LCL". Connect the usb to the uart and open the terminal program. Test the transmission via the LED on the Pmod. Then (carefully) plug into Pmod port on Zybo.		 davidgb 1196d 23h /
197 Updates from John Kent:
-- 4.5 John Kent 2012-02-04 Re-arranged Rx & Tx Baud clock edge detect.
-- 4.6 John Kent 3021-01-30 Double sample RxC, TxC, and RxD with cpu_clk
-- for 125MHz Clock on Zybo Z7 board.		 davidgb 1203d 20h /
196 Working system boots to SBUG. Uses RS232 Pmod (no handshake) and 57600,8,N,1 (no handshake) hyperterm. davidgb 1203d 20h /
195 Switched to using the UART over usb for the console port. davidgb 1203d 20h /
194 Finally have a working board. davidgb 1203d 21h /
193 Fixed part of the ACIA problem - the polarity of the NMI was wrong. Now get clean output but input to the ACIA is not working. Also fixed the 32k addressing davidgb 1204d 00h /
192 Fixed part of the ACIA problem - the polarity of the NMI was wrong. Now get clean output but input to the ACIA is not working. davidgb 1204d 00h /
191 check in file so that you do not need to generate it when running ISE in gui davidgb 1204d 21h /
190 check in file so that you do not need to generate it when running ISE in gui davidgb 1204d 21h /
189 Remove unused file. Created by ISE gui. davidgb 1210d 15h /
188 update options to match what the ISE gui does davidgb 1210d 16h /
187 Partially works. Garbage on the ACIA due to baud clock problems. davidgb 1210d 21h /
186 Somewhat functional boot to SBUG. ACIA freq is wrong but sometimes works if hyperterm set to 115kBps davidgb 1211d 00h /
185 Reverted back to the single-step version - something was broken davidgb 1211d 01h /
184 update files to correctly produce flex9ram.vhd davidgb 1211d 01h /
183 update file extensions davidgb 1211d 01h /

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.