URL https://opencores.org/ocsvn/amber/amber/trunk

Subversion Repositories amber

[/] [amber/] - Rev 86

Filtering Options

From rev	To rev	Max revs

Search for

Rev	Log message	Author	Age	Path
86	Fixed bug in amber 25 where a read was taken from user mode register in subervisor mode immediately following a ldm to user mode registers	csantifort	3328d 05h	/amber/
85	Fixed bug with accigning the mac address value	csantifort	3328d 12h	/amber/
84	Fixed some typos - no functional change	csantifort	3328d 12h	/amber/
83	Fixed bug with carry bit - now only use the carry bit as an input to specific instruments that use it - add with carry and subtract with carry	csantifort	3328d 12h	/amber/
82	Fixed overflag bug, ldmia user regs bug and status_bits_mode set on non-ececuting command bug	csantifort	3342d 00h	/amber/
81	Make the tcp functionality more like a normal sockets implementation.	csantifort	4006d 02h	/amber/
80	Enhanced boot-loader-ethmac to handle any number of telnet connections.	csantifort	4020d 05h	/amber/
79	Added msc flash file	csantifort	4020d 10h	/amber/
78	Added a serial debug port (using UART0) to boot-loader-ethmac	csantifort	4020d 11h	/amber/
77	Added new a23 source files to sim and synthesis source lists.	csantifort	4022d 08h	/amber/
76	Split the spec document into a processor core spec, and a user guide.	csantifort	4022d 08h	/amber/
75	Fixed scripts after renaming boot-loader to boot-loader-serial	csantifort	4028d 06h	/amber/
74	The patch implements barrel shifter using rotate as a main primitive. The design was optimized for Altera Cyclone III FPGA and can be reused with other FPGA vendors and products. The patch integrates the FPGA-optimized barrel shifter into the Amber 23 core when it is build for Altera FPGA. The patch reduces footprint from 1178 to 339 LEs keeping Fmax at 57-60 MHz. Contributed by: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>	csantifort	4028d 06h	/amber/
73	The patch introduces a new configuration option `A23_RAM_REGISTER_BANK, which controls instantiation of Amber 23 register bank. If the option is set, a ram-based variant of the register bank is instantiated. It can be useful in low-end FPGA designs, where flipflops and muxes are costly. Altera Cyclone III resource utilization: - flipflop-based register bank: 1583 combinationals + 856 registers - ram-based register bank: 268 combinationals + 156 registers Contributed by Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>	csantifort	4028d 06h	/amber/
72	5 bit "OH_USR" constant was used when 2 bit "USR" should be used. Both of the constants are 0. The fault was introduced by ram-based register bank commit. Contributed by: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>	csantifort	4028d 06h	/amber/
71	Original Amber 23 core uses asyncronous implementation of register bank. It leads to some problems with ram-based implementation of the register bank, because at least Altera FPGAs uses syncronous ram blocks, so the whole address needs to be latched. The patch exposes non-registered versions of register select signals to the register bank, so the bank can build address and latch it in the syncronous ram input register. The patch is a pre-requisite for ram-based register bank implementation on Altera FPGA. Contributed by Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>	csantifort	4028d 06h	/amber/
70	The mlas_bug testcase tried to use stack without setting stack pointer register, causing unpredictable behavoiur. The patch uses an expilict stack area for the test. Contributed by: Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>	csantifort	4028d 06h	/amber/
69	Updated the spec for ISE 14.5, boot-loader-ethmac.	csantifort	4028d 07h	/amber/
68	Remove modelsim files. Only supporting Xilinx isim now.	csantifort	4028d 07h	/amber/
67	renamed boot-loader.c to boot-loader-serial.c	csantifort	4028d 07h	/amber/

1 2 Next >

Show All

Browse

Tools

Subversion Repositories amber

[/] [amber/] - Rev 86

Filtering Options