URL https://opencores.org/ocsvn/ethmac/ethmac/trunk

Subversion Repositories ethmac

[/] - Rev 274

Filtering Options

From rev	To rev	Max revs

Search for

Rev	Log message	Author	Age	Path
274	Backup version. Not fully working.	tadejm	7911d 15h	/
273	This commit was manufactured by cvs2svn to create tag 'rel_15'.		7911d 21h	/
272	When control packets were received, they were ignored in some cases.	tadejm	7911d 21h	/
271	This commit was manufactured by cvs2svn to create tag 'rel_14'.		7912d 23h	/
270	When receiving normal data frame and RxFlow control was switched on, RXB interrupt was not set.	mohor	7912d 23h	/
269	When in full duplex, transmit was sometimes blocked. Fixed.	mohor	7913d 23h	/
268	Release 1.19. Control frame description changed.	mohor	7967d 16h	/
267	Full duplex control frames tested.	mohor	7967d 18h	/
266	Flow control test almost finished.	mohor	7972d 17h	/
265	This commit was manufactured by cvs2svn to create tag 'rel_13'.		7972d 21h	/
264	Registers RxStatusWrite_rck and RxStatusWriteLatched were not used anywhere. Removed.	mohor	7972d 21h	/
263	test_mac_full_duplex_flow_control tests pretty much finished. TEST 0: INSERT CONTROL FRM. WHILE TRANSMITTING NORMAL FRM. AT 4 TX BD ( 10Mbps ) finished. TEST 2: RECEIVE CONTROL FRAMES WITH PASSALL OPTION TURNED OFF AT ONE RX BD ( 10Mbps ) finished.	mohor	7973d 09h	/
262	Version 1.18 released. MIIMRST (Reset of the MIIM module) not used any more in the MIIMODER register. Control Frame bit (CF) added to the RX buffer descriptor. Control frame detection section updated.	mohor	7973d 09h	/
261	Rx Flow control fixed. CF flag added to the RX buffer descriptor. RxAbort synchronized.	mohor	7973d 09h	/
260	test_mac_full_duplex_flow test 0 finished. Sending the control (PAUSE) frame finished.	mohor	7973d 21h	/
259	In loopback rx_clk is not looped back. Possible CRC error. Consider if usage of additional logic is necessery (FIFO for looping the data).	mohor	7974d 10h	/
258	This commit was manufactured by cvs2svn to create tag 'rel_12'.		7974d 10h	/
257	When TxUsedData and CtrlMux occur at the same time, byte counter needs to be incremented by 2. Signal IncrementByteCntBy2 added for that reason.	mohor	7974d 10h	/
256	TxDone and TxAbort changed so they're not propagated to the wishbone module when control frame is transmitted.	mohor	7974d 10h	/
255	TPauseRq synchronized to tx_clk.	mohor	7974d 11h	/
254	Temp version.	mohor	7975d 14h	/
253	r_MiiMRst is not used for resetting the MIIM module. wb_rst used instead.	mohor	7975d 16h	/
252	Just some updates.	tadejm	7975d 17h	/
251	When control frame (PAUSE) was sent, status was written in the eth_wishbone module and both TXB and TXC interrupts were set. Fixed. Only TXC interrupt is set.	mohor	7975d 17h	/
250	AddressMiss status is connecting to the Rx BD. AddressMiss is identifying that a frame was received because of the promiscous mode.	mohor	7975d 17h	/
249	This commit was manufactured by cvs2svn to create tag 'rel_11'.		7976d 17h	/
248	wb_rst_i is used for MIIM reset.	mohor	7976d 17h	/
247	This commit was manufactured by cvs2svn to create tag 'rel_10'.		7979d 20h	/
246	Since r_Rst bit is not used any more, default value is changed to 0xa000.	mohor	7979d 20h	/
245	Rev 1.7.	mohor	7980d 14h	/

Browse

Tools

Subversion Repositories ethmac

[/] - Rev 274

Filtering Options