OpenCores
URL https://opencores.org/ocsvn/ethmac/ethmac/trunk

Subversion Repositories ethmac

[/] [ethmac/] [tags/] [rel_15/] - Rev 338

Rev

Filtering Options

Clear current filter

Rev Log message Author Age Path
338 root 3726d 20h /ethmac/tags/rel_15/
335 New directory structure. root 3784d 02h /ethmac/tags/rel_15/
273 This commit was manufactured by cvs2svn to create tag 'rel_15'. 6021d 22h /ethmac/tags/rel_15/
272 When control packets were received, they were ignored in some cases. tadejm 6021d 22h /ethmac/tags/rel_15/
270 When receiving normal data frame and RxFlow control was switched on, RXB
interrupt was not set.
mohor 6022d 23h /ethmac/tags/rel_15/
269 When in full duplex, transmit was sometimes blocked. Fixed. mohor 6023d 23h /ethmac/tags/rel_15/
268 Release 1.19. Control frame description changed. mohor 6077d 17h /ethmac/tags/rel_15/
267 Full duplex control frames tested. mohor 6077d 19h /ethmac/tags/rel_15/
266 Flow control test almost finished. mohor 6082d 18h /ethmac/tags/rel_15/
264 Registers RxStatusWrite_rck and RxStatusWriteLatched were not used
anywhere. Removed.
mohor 6082d 22h /ethmac/tags/rel_15/
263 test_mac_full_duplex_flow_control tests pretty much finished.
TEST 0: INSERT CONTROL FRM. WHILE TRANSMITTING NORMAL
FRM. AT 4 TX BD ( 10Mbps ) finished.
TEST 2: RECEIVE CONTROL FRAMES WITH PASSALL OPTION
TURNED OFF AT ONE RX BD ( 10Mbps ) finished.
mohor 6083d 09h /ethmac/tags/rel_15/
262 Version 1.18 released.
MIIMRST (Reset of the MIIM module) not used any more in the MIIMODER
register. Control Frame bit (CF) added to the RX buffer descriptor. Control
frame detection section updated.
mohor 6083d 10h /ethmac/tags/rel_15/
261 Rx Flow control fixed. CF flag added to the RX buffer descriptor. RxAbort
synchronized.
mohor 6083d 10h /ethmac/tags/rel_15/
260 test_mac_full_duplex_flow test 0 finished. Sending the control (PAUSE) frame
finished.
mohor 6083d 22h /ethmac/tags/rel_15/
259 In loopback rx_clk is not looped back. Possible CRC error. Consider if usage
of additional logic is necessery (FIFO for looping the data).
mohor 6084d 11h /ethmac/tags/rel_15/
257 When TxUsedData and CtrlMux occur at the same time, byte counter needs
to be incremented by 2. Signal IncrementByteCntBy2 added for that reason.
mohor 6084d 11h /ethmac/tags/rel_15/
256 TxDone and TxAbort changed so they're not propagated to the wishbone
module when control frame is transmitted.
mohor 6084d 11h /ethmac/tags/rel_15/
255 TPauseRq synchronized to tx_clk. mohor 6084d 11h /ethmac/tags/rel_15/
254 Temp version. mohor 6085d 15h /ethmac/tags/rel_15/
253 r_MiiMRst is not used for resetting the MIIM module. wb_rst used instead. mohor 6085d 17h /ethmac/tags/rel_15/
252 Just some updates. tadejm 6085d 18h /ethmac/tags/rel_15/
251 When control frame (PAUSE) was sent, status was written in the
eth_wishbone module and both TXB and TXC interrupts were set. Fixed.
Only TXC interrupt is set.
mohor 6085d 18h /ethmac/tags/rel_15/
250 AddressMiss status is connecting to the Rx BD. AddressMiss is identifying
that a frame was received because of the promiscous mode.
mohor 6085d 18h /ethmac/tags/rel_15/
248 wb_rst_i is used for MIIM reset. mohor 6086d 18h /ethmac/tags/rel_15/
246 Since r_Rst bit is not used any more, default value is changed to 0xa000. mohor 6089d 21h /ethmac/tags/rel_15/
245 Rev 1.7. mohor 6090d 15h /ethmac/tags/rel_15/
244 r_Rst signal does not reset any module any more and is removed from the design. mohor 6090d 17h /ethmac/tags/rel_15/
243 Late collision is not reported any more. tadejm 6090d 22h /ethmac/tags/rel_15/
242 Late collision is reported only when not in the full duplex.
Sample is taken (for status) as soon as MRxDV is not valid (regardless
of the received byte cnt).
tadejm 6091d 13h /ethmac/tags/rel_15/
241 StartIdle state changed (not important the size of the packet).
StartData1 activates only while ByteCnt is smaller than the MaxFrame.
tadejm 6091d 13h /ethmac/tags/rel_15/

powered by: WebSVN 2.1.0

© copyright 1999-2019 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.