OpenCores
URL https://opencores.org/ocsvn/ethmac/ethmac/trunk

Subversion Repositories ethmac

[/] [ethmac/] [tags/] [rel_18/] - Rev 283

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
283 RxBDAddress was updated also when value to r_TxBDNum was written with
greater value than allowed.
mohor 7707d 07h /ethmac/tags/rel_18
281 Tests test_mac_full_duplex_receive 4-7 fixed to proper BD. mohor 7784d 08h /ethmac/tags/rel_18
280 Reset has priority in some flipflops. mohor 7785d 09h /ethmac/tags/rel_18
279 Underrun test fixed. Many other tests fixed. mohor 7785d 10h /ethmac/tags/rel_18
278 A new bug (entered with previous update) fixed. When abort occured sometimes
data transmission was blocked.
mohor 7785d 10h /ethmac/tags/rel_18
277 When padding was enabled and crc disabled, frame was not ended correctly. mohor 7785d 10h /ethmac/tags/rel_18
276 Defer indication changed. tadejm 7785d 10h /ethmac/tags/rel_18
275 Fix MTxErr or prevent sending too big frames. mohor 7792d 14h /ethmac/tags/rel_18
274 Backup version. Not fully working. tadejm 7793d 04h /ethmac/tags/rel_18
272 When control packets were received, they were ignored in some cases. tadejm 7793d 10h /ethmac/tags/rel_18
270 When receiving normal data frame and RxFlow control was switched on, RXB
interrupt was not set.
mohor 7794d 12h /ethmac/tags/rel_18
269 When in full duplex, transmit was sometimes blocked. Fixed. mohor 7795d 12h /ethmac/tags/rel_18
268 Release 1.19. Control frame description changed. mohor 7849d 05h /ethmac/tags/rel_18
267 Full duplex control frames tested. mohor 7849d 07h /ethmac/tags/rel_18
266 Flow control test almost finished. mohor 7854d 06h /ethmac/tags/rel_18
264 Registers RxStatusWrite_rck and RxStatusWriteLatched were not used
anywhere. Removed.
mohor 7854d 10h /ethmac/tags/rel_18
263 test_mac_full_duplex_flow_control tests pretty much finished.
TEST 0: INSERT CONTROL FRM. WHILE TRANSMITTING NORMAL
FRM. AT 4 TX BD ( 10Mbps ) finished.
TEST 2: RECEIVE CONTROL FRAMES WITH PASSALL OPTION
TURNED OFF AT ONE RX BD ( 10Mbps ) finished.
mohor 7854d 21h /ethmac/tags/rel_18
262 Version 1.18 released.
MIIMRST (Reset of the MIIM module) not used any more in the MIIMODER
register. Control Frame bit (CF) added to the RX buffer descriptor. Control
frame detection section updated.
mohor 7854d 22h /ethmac/tags/rel_18
261 Rx Flow control fixed. CF flag added to the RX buffer descriptor. RxAbort
synchronized.
mohor 7854d 22h /ethmac/tags/rel_18
260 test_mac_full_duplex_flow test 0 finished. Sending the control (PAUSE) frame
finished.
mohor 7855d 10h /ethmac/tags/rel_18
259 In loopback rx_clk is not looped back. Possible CRC error. Consider if usage
of additional logic is necessery (FIFO for looping the data).
mohor 7855d 23h /ethmac/tags/rel_18
257 When TxUsedData and CtrlMux occur at the same time, byte counter needs
to be incremented by 2. Signal IncrementByteCntBy2 added for that reason.
mohor 7855d 23h /ethmac/tags/rel_18
256 TxDone and TxAbort changed so they're not propagated to the wishbone
module when control frame is transmitted.
mohor 7855d 23h /ethmac/tags/rel_18
255 TPauseRq synchronized to tx_clk. mohor 7856d 00h /ethmac/tags/rel_18
254 Temp version. mohor 7857d 03h /ethmac/tags/rel_18
253 r_MiiMRst is not used for resetting the MIIM module. wb_rst used instead. mohor 7857d 05h /ethmac/tags/rel_18
252 Just some updates. tadejm 7857d 06h /ethmac/tags/rel_18
251 When control frame (PAUSE) was sent, status was written in the
eth_wishbone module and both TXB and TXC interrupts were set. Fixed.
Only TXC interrupt is set.
mohor 7857d 06h /ethmac/tags/rel_18
250 AddressMiss status is connecting to the Rx BD. AddressMiss is identifying
that a frame was received because of the promiscous mode.
mohor 7857d 06h /ethmac/tags/rel_18
248 wb_rst_i is used for MIIM reset. mohor 7858d 06h /ethmac/tags/rel_18

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.