OpenCores
URL https://opencores.org/ocsvn/ethmac/ethmac/trunk

Subversion Repositories ethmac

[/] [ethmac/] [tags/] [rel_20/] - Rev 277

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
277 When padding was enabled and crc disabled, frame was not ended correctly. mohor 8025d 09h /ethmac/tags/rel_20/
276 Defer indication changed. tadejm 8025d 09h /ethmac/tags/rel_20/
275 Fix MTxErr or prevent sending too big frames. mohor 8032d 13h /ethmac/tags/rel_20/
274 Backup version. Not fully working. tadejm 8033d 03h /ethmac/tags/rel_20/
272 When control packets were received, they were ignored in some cases. tadejm 8033d 08h /ethmac/tags/rel_20/
270 When receiving normal data frame and RxFlow control was switched on, RXB
interrupt was not set.
mohor 8034d 10h /ethmac/tags/rel_20/
269 When in full duplex, transmit was sometimes blocked. Fixed. mohor 8035d 10h /ethmac/tags/rel_20/
268 Release 1.19. Control frame description changed. mohor 8089d 03h /ethmac/tags/rel_20/
267 Full duplex control frames tested. mohor 8089d 06h /ethmac/tags/rel_20/
266 Flow control test almost finished. mohor 8094d 05h /ethmac/tags/rel_20/
264 Registers RxStatusWrite_rck and RxStatusWriteLatched were not used
anywhere. Removed.
mohor 8094d 09h /ethmac/tags/rel_20/
263 test_mac_full_duplex_flow_control tests pretty much finished.
TEST 0: INSERT CONTROL FRM. WHILE TRANSMITTING NORMAL
FRM. AT 4 TX BD ( 10Mbps ) finished.
TEST 2: RECEIVE CONTROL FRAMES WITH PASSALL OPTION
TURNED OFF AT ONE RX BD ( 10Mbps ) finished.
mohor 8094d 20h /ethmac/tags/rel_20/
262 Version 1.18 released.
MIIMRST (Reset of the MIIM module) not used any more in the MIIMODER
register. Control Frame bit (CF) added to the RX buffer descriptor. Control
frame detection section updated.
mohor 8094d 20h /ethmac/tags/rel_20/
261 Rx Flow control fixed. CF flag added to the RX buffer descriptor. RxAbort
synchronized.
mohor 8094d 20h /ethmac/tags/rel_20/
260 test_mac_full_duplex_flow test 0 finished. Sending the control (PAUSE) frame
finished.
mohor 8095d 08h /ethmac/tags/rel_20/
259 In loopback rx_clk is not looped back. Possible CRC error. Consider if usage
of additional logic is necessery (FIFO for looping the data).
mohor 8095d 22h /ethmac/tags/rel_20/
257 When TxUsedData and CtrlMux occur at the same time, byte counter needs
to be incremented by 2. Signal IncrementByteCntBy2 added for that reason.
mohor 8095d 22h /ethmac/tags/rel_20/
256 TxDone and TxAbort changed so they're not propagated to the wishbone
module when control frame is transmitted.
mohor 8095d 22h /ethmac/tags/rel_20/
255 TPauseRq synchronized to tx_clk. mohor 8095d 22h /ethmac/tags/rel_20/
254 Temp version. mohor 8097d 02h /ethmac/tags/rel_20/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2025 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.