OpenCores
URL https://opencores.org/ocsvn/ethmac/ethmac/trunk

Subversion Repositories ethmac

[/] [ethmac/] [tags/] [rel_22/] - Rev 279

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
279 Underrun test fixed. Many other tests fixed. mohor 7778d 06h /ethmac/tags/rel_22/
278 A new bug (entered with previous update) fixed. When abort occured sometimes
data transmission was blocked.		 mohor 7778d 06h /ethmac/tags/rel_22/
277 When padding was enabled and crc disabled, frame was not ended correctly. mohor 7778d 06h /ethmac/tags/rel_22/
276 Defer indication changed. tadejm 7778d 06h /ethmac/tags/rel_22/
275 Fix MTxErr or prevent sending too big frames. mohor 7785d 10h /ethmac/tags/rel_22/
274 Backup version. Not fully working. tadejm 7786d 00h /ethmac/tags/rel_22/
272 When control packets were received, they were ignored in some cases. tadejm 7786d 06h /ethmac/tags/rel_22/
270 When receiving normal data frame and RxFlow control was switched on, RXB
interrupt was not set.		 mohor 7787d 07h /ethmac/tags/rel_22/
269 When in full duplex, transmit was sometimes blocked. Fixed. mohor 7788d 08h /ethmac/tags/rel_22/
268 Release 1.19. Control frame description changed. mohor 7842d 01h /ethmac/tags/rel_22/
267 Full duplex control frames tested. mohor 7842d 03h /ethmac/tags/rel_22/
266 Flow control test almost finished. mohor 7847d 02h /ethmac/tags/rel_22/
264 Registers RxStatusWrite_rck and RxStatusWriteLatched were not used
anywhere. Removed.		 mohor 7847d 06h /ethmac/tags/rel_22/
263 test_mac_full_duplex_flow_control tests pretty much finished.
TEST 0: INSERT CONTROL FRM. WHILE TRANSMITTING NORMAL
FRM. AT 4 TX BD ( 10Mbps ) finished.
TEST 2: RECEIVE CONTROL FRAMES WITH PASSALL OPTION
TURNED OFF AT ONE RX BD ( 10Mbps ) finished.		 mohor 7847d 17h /ethmac/tags/rel_22/
262 Version 1.18 released.
MIIMRST (Reset of the MIIM module) not used any more in the MIIMODER
register. Control Frame bit (CF) added to the RX buffer descriptor. Control
frame detection section updated.		 mohor 7847d 18h /ethmac/tags/rel_22/
261 Rx Flow control fixed. CF flag added to the RX buffer descriptor. RxAbort
synchronized.		 mohor 7847d 18h /ethmac/tags/rel_22/
260 test_mac_full_duplex_flow test 0 finished. Sending the control (PAUSE) frame
finished.		 mohor 7848d 06h /ethmac/tags/rel_22/
259 In loopback rx_clk is not looped back. Possible CRC error. Consider if usage
of additional logic is necessery (FIFO for looping the data).		 mohor 7848d 19h /ethmac/tags/rel_22/
257 When TxUsedData and CtrlMux occur at the same time, byte counter needs
to be incremented by 2. Signal IncrementByteCntBy2 added for that reason.		 mohor 7848d 19h /ethmac/tags/rel_22/
256 TxDone and TxAbort changed so they're not propagated to the wishbone
module when control frame is transmitted.		 mohor 7848d 19h /ethmac/tags/rel_22/
255 TPauseRq synchronized to tx_clk. mohor 7848d 19h /ethmac/tags/rel_22/
254 Temp version. mohor 7849d 23h /ethmac/tags/rel_22/
253 r_MiiMRst is not used for resetting the MIIM module. wb_rst used instead. mohor 7850d 01h /ethmac/tags/rel_22/
252 Just some updates. tadejm 7850d 02h /ethmac/tags/rel_22/
251 When control frame (PAUSE) was sent, status was written in the
eth_wishbone module and both TXB and TXC interrupts were set. Fixed.
Only TXC interrupt is set.		 mohor 7850d 02h /ethmac/tags/rel_22/
250 AddressMiss status is connecting to the Rx BD. AddressMiss is identifying
that a frame was received because of the promiscous mode.		 mohor 7850d 02h /ethmac/tags/rel_22/
248 wb_rst_i is used for MIIM reset. mohor 7851d 02h /ethmac/tags/rel_22/
246 Since r_Rst bit is not used any more, default value is changed to 0xa000. mohor 7854d 05h /ethmac/tags/rel_22/
245 Rev 1.7. mohor 7854d 23h /ethmac/tags/rel_22/
244 r_Rst signal does not reset any module any more and is removed from the design. mohor 7855d 01h /ethmac/tags/rel_22/

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.