Subversion Repositories ethmac

[/] [ethmac/] [tags/] [rel_25/] - Rev 281


Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
281 Tests test_mac_full_duplex_receive 4-7 fixed to proper BD. mohor 6719d 07h /ethmac/tags/rel_25/
280 Reset has priority in some flipflops. mohor 6720d 09h /ethmac/tags/rel_25/
279 Underrun test fixed. Many other tests fixed. mohor 6720d 10h /ethmac/tags/rel_25/
278 A new bug (entered with previous update) fixed. When abort occured sometimes
data transmission was blocked.
mohor 6720d 10h /ethmac/tags/rel_25/
277 When padding was enabled and crc disabled, frame was not ended correctly. mohor 6720d 10h /ethmac/tags/rel_25/
276 Defer indication changed. tadejm 6720d 10h /ethmac/tags/rel_25/
275 Fix MTxErr or prevent sending too big frames. mohor 6727d 14h /ethmac/tags/rel_25/
274 Backup version. Not fully working. tadejm 6728d 04h /ethmac/tags/rel_25/
272 When control packets were received, they were ignored in some cases. tadejm 6728d 10h /ethmac/tags/rel_25/
270 When receiving normal data frame and RxFlow control was switched on, RXB
interrupt was not set.
mohor 6729d 11h /ethmac/tags/rel_25/
269 When in full duplex, transmit was sometimes blocked. Fixed. mohor 6730d 11h /ethmac/tags/rel_25/
268 Release 1.19. Control frame description changed. mohor 6784d 05h /ethmac/tags/rel_25/
267 Full duplex control frames tested. mohor 6784d 07h /ethmac/tags/rel_25/
266 Flow control test almost finished. mohor 6789d 06h /ethmac/tags/rel_25/
264 Registers RxStatusWrite_rck and RxStatusWriteLatched were not used
anywhere. Removed.
mohor 6789d 10h /ethmac/tags/rel_25/
263 test_mac_full_duplex_flow_control tests pretty much finished.
FRM. AT 4 TX BD ( 10Mbps ) finished.
TURNED OFF AT ONE RX BD ( 10Mbps ) finished.
mohor 6789d 21h /ethmac/tags/rel_25/
262 Version 1.18 released.
MIIMRST (Reset of the MIIM module) not used any more in the MIIMODER
register. Control Frame bit (CF) added to the RX buffer descriptor. Control
frame detection section updated.
mohor 6789d 21h /ethmac/tags/rel_25/
261 Rx Flow control fixed. CF flag added to the RX buffer descriptor. RxAbort
mohor 6789d 21h /ethmac/tags/rel_25/
260 test_mac_full_duplex_flow test 0 finished. Sending the control (PAUSE) frame
mohor 6790d 09h /ethmac/tags/rel_25/
259 In loopback rx_clk is not looped back. Possible CRC error. Consider if usage
of additional logic is necessery (FIFO for looping the data).
mohor 6790d 23h /ethmac/tags/rel_25/
257 When TxUsedData and CtrlMux occur at the same time, byte counter needs
to be incremented by 2. Signal IncrementByteCntBy2 added for that reason.
mohor 6790d 23h /ethmac/tags/rel_25/
256 TxDone and TxAbort changed so they're not propagated to the wishbone
module when control frame is transmitted.
mohor 6790d 23h /ethmac/tags/rel_25/
255 TPauseRq synchronized to tx_clk. mohor 6790d 23h /ethmac/tags/rel_25/
254 Temp version. mohor 6792d 03h /ethmac/tags/rel_25/
253 r_MiiMRst is not used for resetting the MIIM module. wb_rst used instead. mohor 6792d 05h /ethmac/tags/rel_25/
252 Just some updates. tadejm 6792d 06h /ethmac/tags/rel_25/
251 When control frame (PAUSE) was sent, status was written in the
eth_wishbone module and both TXB and TXC interrupts were set. Fixed.
Only TXC interrupt is set.
mohor 6792d 06h /ethmac/tags/rel_25/
250 AddressMiss status is connecting to the Rx BD. AddressMiss is identifying
that a frame was received because of the promiscous mode.
mohor 6792d 06h /ethmac/tags/rel_25/
248 wb_rst_i is used for MIIM reset. mohor 6793d 06h /ethmac/tags/rel_25/
246 Since r_Rst bit is not used any more, default value is changed to 0xa000. mohor 6796d 09h /ethmac/tags/rel_25/

powered by: WebSVN 2.1.0

© copyright 1999-2021, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.