Subversion Repositories ethmac

[/] - Rev 122


Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
122 ethernet spram added. So far a generic ram and xilinx RAMB4 are used. mohor 7980d 16h /
121 gsr added for use when ETH_XILINX_RAMB4 define is set. mohor 7980d 16h /
120 Unused files removed. mohor 7980d 17h /
119 Ram , used for BDs changed from generic_spram to eth_spram_256x32. mohor 7980d 17h /
118 ShiftEnded synchronization changed. mohor 7984d 08h /
117 Clock mrx_clk set to 2.5 MHz. mohor 7984d 18h /
116 Testing environment also includes traffic cop, memory interface and host
mohor 7984d 19h /
115 RxBDAddress takes `ETH_TX_BD_NUM_DEF value after reset. mohor 7985d 16h /
114 EXTERNAL_DMA removed. External DMA not supported. mohor 7986d 14h /
113 RxPointer bug fixed. mohor 7993d 06h /
112 Previous bug wasn't succesfully removed. Now fixed. mohor 7993d 19h /
111 Master state machine had a bug when switching from master write to
master read.
mohor 7994d 09h /
110 m_wb_cyc_o signal released after every single transfer. mohor 7994d 12h /
109 Comment removed. mohor 7994d 12h /
108 Testbench supports unaligned accesses. mohor 8061d 22h /
107 TX_BUF_BASE changed. mohor 8061d 22h /
106 Outputs registered. Reset changed for eth_wishbone module. mohor 8061d 22h /
105 Compiler directives added. Tx and Rx fifo size incremented. A "late collision"
bug fixed.
mohor 8071d 00h /
104 FCS should not be included in NibbleMinFl. mohor 8072d 18h /
103 Wishbone signals are registered when ETH_REGISTERED_OUTPUTS is
selected in eth_defines.v
mohor 8072d 18h /
102 Interrupts are visible in the ETH_INT_SOURCE regardless if they are enabled
or not.
mohor 8072d 18h /
101 Short frame and ReceivedLengthOK were not detected correctly. mohor 8072d 19h /
100 Generic ram or Xilinx ram can be used in fifo (selectable by setting
ETH_FIFO_XILINX in eth_defines.v).
mohor 8072d 19h /
99 Document revised. mohor 8079d 17h /
98 Document revised. mohor 8079d 18h /
97 Small typo fixed. lampret 8096d 16h /
96 Any address can be used for Tx and Rx BD pointers. Address does not need
to be aligned.
mohor 8100d 16h /
95 md_padoen_o changed to md_padoe_o. Signal was always active high, just
name was incorrect.
mohor 8100d 19h /
94 When clear and read/write are active at the same time, cnt and pointers are
set to 1.
mohor 8100d 19h /
93 When in promiscous mode some frames were not received correctly. Fixed. mohor 8105d 17h /

powered by: WebSVN 2.1.0

© copyright 1999-2024, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.