Subversion Repositories ethmac

[/] - Rev 281


Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
281 Tests test_mac_full_duplex_receive 4-7 fixed to proper BD. mohor 7096d 23h /
280 Reset has priority in some flipflops. mohor 7098d 01h /
279 Underrun test fixed. Many other tests fixed. mohor 7098d 02h /
278 A new bug (entered with previous update) fixed. When abort occured sometimes
data transmission was blocked.
mohor 7098d 02h /
277 When padding was enabled and crc disabled, frame was not ended correctly. mohor 7098d 02h /
276 Defer indication changed. tadejm 7098d 02h /
275 Fix MTxErr or prevent sending too big frames. mohor 7105d 06h /
274 Backup version. Not fully working. tadejm 7105d 20h /
273 This commit was manufactured by cvs2svn to create tag 'rel_15'. 7106d 02h /
272 When control packets were received, they were ignored in some cases. tadejm 7106d 02h /
271 This commit was manufactured by cvs2svn to create tag 'rel_14'. 7107d 03h /
270 When receiving normal data frame and RxFlow control was switched on, RXB
interrupt was not set.
mohor 7107d 03h /
269 When in full duplex, transmit was sometimes blocked. Fixed. mohor 7108d 03h /
268 Release 1.19. Control frame description changed. mohor 7161d 21h /
267 Full duplex control frames tested. mohor 7161d 23h /
266 Flow control test almost finished. mohor 7166d 22h /
265 This commit was manufactured by cvs2svn to create tag 'rel_13'. 7167d 02h /
264 Registers RxStatusWrite_rck and RxStatusWriteLatched were not used
anywhere. Removed.
mohor 7167d 02h /
263 test_mac_full_duplex_flow_control tests pretty much finished.
FRM. AT 4 TX BD ( 10Mbps ) finished.
TURNED OFF AT ONE RX BD ( 10Mbps ) finished.
mohor 7167d 13h /
262 Version 1.18 released.
MIIMRST (Reset of the MIIM module) not used any more in the MIIMODER
register. Control Frame bit (CF) added to the RX buffer descriptor. Control
frame detection section updated.
mohor 7167d 13h /
261 Rx Flow control fixed. CF flag added to the RX buffer descriptor. RxAbort
mohor 7167d 13h /
260 test_mac_full_duplex_flow test 0 finished. Sending the control (PAUSE) frame
mohor 7168d 01h /
259 In loopback rx_clk is not looped back. Possible CRC error. Consider if usage
of additional logic is necessery (FIFO for looping the data).
mohor 7168d 15h /
258 This commit was manufactured by cvs2svn to create tag 'rel_12'. 7168d 15h /
257 When TxUsedData and CtrlMux occur at the same time, byte counter needs
to be incremented by 2. Signal IncrementByteCntBy2 added for that reason.
mohor 7168d 15h /
256 TxDone and TxAbort changed so they're not propagated to the wishbone
module when control frame is transmitted.
mohor 7168d 15h /
255 TPauseRq synchronized to tx_clk. mohor 7168d 15h /
254 Temp version. mohor 7169d 19h /
253 r_MiiMRst is not used for resetting the MIIM module. wb_rst used instead. mohor 7169d 21h /
252 Just some updates. tadejm 7169d 22h /

powered by: WebSVN 2.1.0

© copyright 1999-2022, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.