OpenCores
URL https://opencores.org/ocsvn/fade_ether_protocol/fade_ether_protocol/trunk

Subversion Repositories fade_ether_protocol

[/] [fade_ether_protocol/] - Rev 46

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
46 Corrected error related to the fact that the number of 64-bit words
in the last packet is stored in big-endian format.
Corrected error telated to the fact that the length of the packet reported
to the user space is in bytes not in 64-bit words.		 wzab 2187d 03h /fade_ether_protocol/
45 Corrected erroneous assignment of "dbg" signal. wzab 2671d 03h /fade_ether_protocol/
44 Changed design for Kintex 7 based boards (AFCK, KC705) so that
they use the VEXTPROJ environment for VCS friendly project management
(described in http://doi.org/10.1117/12.2247944 )		 wzab 2671d 03h /fade_ether_protocol/
43 Removed latch on "dbg" signal wzab 2671d 03h /fade_ether_protocol/
42 KC705 design upgraded to Vivado 2016.4
Corrrected indentation in a few files in AFCK design		 wzab 2671d 07h /fade_ether_protocol/
41 The AFCK project upgraded to Vivado 2016.4 wzab 2671d 08h /fade_ether_protocol/
40 The "jumbo frame version" renamed from "experimental" to "stable". wzab 2671d 13h /fade_ether_protocol/
39 Added receiver2t4 - program allowing to receive data from 4 links simultaneously wzab 3240d 02h /fade_ether_protocol/
38 In synthesis scripts added waiting, until bitsream is generated... wzab 3271d 12h /fade_ether_protocol/
37 Added new design for AFCK board, which uses 8 10 Gbps links.
Additionally added I2C control of the AFCK Si57x based clock.
The I2C controller is driven via VIO blocks controlled by JTAG
interface from Vivado Tcl console.
Tcl scripts are in the fpga/src/AFCK/i2c_tools directory.
To configure clock to 156.25MHz, and to route it to links,
change directory to fpga/src/AFCK/i2c_tools and do
"source start_10g_links.tcl".
After the clock is reprogrammed, reconfigure the FPGA again
(it seems, that there is a problem with reseting links after
clock is reconfigured).		 wzab 3273d 02h /fade_ether_protocol/
36 Added signals needed to ensure, that Si570/1 chip generates the clock.
Added signals driving the rate select lines in the SFP+ modules high.
Added two XDC files - the first one for FM-S14 in the FMC1
connector, the second one for FM-S14 in the FMC2 connector.		 wzab 3289d 05h /fade_ether_protocol/
35 Changed comment in definition of the descriptor record
Updated IP cores in project for KC705 (to Vivado 2014.4)		 wzab 3392d 04h /fade_ether_protocol/
34 The "old stable" version moved to separate directory. wzab 3406d 09h /fade_ether_protocol/
33 Added script for automatic compilation of FADE for AFCK, using Vivado 2014.4 wzab 3408d 14h /fade_ether_protocol/
32 Added the 4-channel FADE test implementation for the AFCK board. wzab 3408d 18h /fade_ether_protocol/
31 Added receiver2t_cmd to the Makefile wzab 3413d 08h /fade_ether_protocol/
30 Corrected error which slows down handling of user commands (the thread
executing the user command used wait_event_timeout instead of
wait_event_timeout_interruptiple).

Added demo program which tests time of execution of the user's
command.		 wzab 3413d 08h /fade_ether_protocol/
29 Fixed two mistakes in mutex management (mutex not unlocked, when function leaved after an error)
Fixed dead URL in comments.		 wzab 3418d 09h /fade_ether_protocol/
28 Correction of an obvious mistake in the Linux driver, which lead to deadlock
when two applications (or two threads) tried to open the same FADE device.		 wzab 3422d 08h /fade_ether_protocol/
27 Added file fade_one_channel, allowing to implement multiple FADE instances in a single FPGA. wzab 3436d 16h /fade_ether_protocol/

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.