OpenCores
URL https://opencores.org/ocsvn/minsoc/minsoc/trunk

Subversion Repositories minsoc

[/] - Rev 116

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
116 Configure scripts were trying to copy/patch projects files before creating them. Ordering is correct now. rfajardo 4597d 17h /
115 configure.sh script dir aware.
minsoc-install.sh logging to script dir.
rfajardo 4597d 18h /
114 Installation and Configuration scripts can be run out of any directory.
They assume they are going to process the files and directories found in the directory they are run from.
rfajardo 4597d 18h /
113 minsoc-install.sh & minsoc-configure.sh:
-aware of location of configure.sh script
configure.sh:
-does not block on patch error

spartan3e_starter_kit & spartan3e_starter_kit_eth:
-or1200_defines.v updated

prj:
-src/blackboxes/or1200_top.v adjusted to or1200_rel1
-Makefile had a typo regarding altera vhdl files
rfajardo 4597d 18h /
112 Updating installation & configuration scripts. rfajardo 4598d 10h /
111 minsoc-install.sh: DIR_TO_INSTALL is required before using beautify.sh rfajardo 4598d 10h /
110 Fixing several minor issues with the system:
-minsoc-install splitted into installation and configuration
-minsoc-configure.sh can be used to configure a fresh checked out system
-configure script used by both minsoc-configure.sh and minsoc-install.sh to configure

-rtl/verilog: svn externals fixed
-or1200 rolled back to release-1.0

-prj/scripts:
-Makefile has been used by simulation to differentiate project definition of vhdl and verilog files
-Altera was differentiating it in script
-now there are two scripts, one for vhdl and another for verilog. The differentiation occurs in Makefile as for simulation.
-altera_3c25_board/configure scripts had to be updated, vprj and vhdprj file extensions used to differentiate Verilog and VHDL project files.

-prj/src: or1200_top.prj downdated to definition of or1200_v1
rfajardo 4598d 11h /
109 Creating a branche for release candidate 1.0. rfajardo 4598d 12h /
108 Scripts updates to correct paths when working under Windows. Now, ModelSim, Xilinx and Altera synthesis are working on Windows through batch files.

Icarus Verilog and Altera synthesis are working as well. Job done!
rfajardo 4598d 15h /
107 Adding setup batch script for Altera synthesis on Windows.

prj/scripts/altprj.sh has now to check if it is run from cygwin in order to re-formulate the path to windows system.

Maybe the other scripts have to be updated too. This will be checked soon.
rfajardo 4598d 18h /
106 Installation script was checking the ENV variable before setting it. rfajardo 4598d 21h /
105 Updating configure scripts to copy Windows synthesis launch script setup.bat from either minsoc/syn/altera or minsoc/syn/xilinx to minsoc/syn. rfajardo 4598d 23h /
104 Enabling modelsim simulation for current project definition.
vhdl and verilog projects have to be separated:
-prj/Makefile defines VHDL_PROJECTS and VERILOG_PROJECTS, they are merged into PROJECTS. Tools which don't care about VHDL or Verilog use PROJECTS list while other tools use VERILOG_ or VHDL_PROJECTS.
-Simulation uses VHDL_PROJECTS and VERILOG_PROJECTS independently.
-prj/scripts/simprj.sh splitted in:
-simvhdl.sh
-simverilog.sh
(they generate the input files in the right format for simulation tools)
rfajardo 4605d 22h /
103 But the file is called gdb-6.8a.tar.bz2, so tar must be run on that name. rfajardo 4608d 13h /
102 GNU GDB FTP has renamed gdb-6.8 package to gdb-6.8a package. Uncompressed it remains gdb-6.8, so no other changes to script are necessary. rfajardo 4608d 13h /
101 Documentation, wiki's address updated. rfajardo 4634d 01h /
100 syn/altera/minsoc_top.qsf: I thought this file was being generated now as project file description. But it is merely a synthesis configuration file and must be here. File re-added. rfajardo 4642d 23h /
99 backend/altera_3c25_board/minsoc_defines.v: if GENERIC_FPGA selected, undefine ALTERA_FPGA and FPGA_FAMILY to avoid vendor specific code to flow into the simulation. If you don't do it, generate_bench fails. rfajardo 4642d 23h /
98 Removing deprecated minsoc_top.qsf file. rfajardo 4642d 23h /
97 As proposed by Javier Almansa automatically generated project files for simulation and synthesis are out of revision control. Instead, the backend configure scripts run the prj/Makefile now to generate the project files prior to configuration of SoC for a specific board. rfajardo 4642d 23h /
96 Some files needed for Altera synthesis javieralso 4643d 10h /
95 Makefile for Altera FPGAs fixed javieralso 4644d 13h /
94 Fix bug in minsoc_top.prj for Altera synthesis javieralso 4646d 22h /
93 Support for Altera synthesis. It needs some tune, but it works fine javieralso 4647d 01h /
92 backend/spartan3e_starter_kit*: or1200_defines.v file was outdated and hindering synthesis. Probably it would be best if we used a patching system here. But for now, I copied the new files and made the necessary changes to fit the system into the target boards. rfajardo 4647d 23h /
91 prj/scripts/: Changing scripts not to include multiple timescale.v files from different listed directories in the project definition file. Instead, now the internal loop which look for the file in different directories is broken when the first file is found. rfajardo 4648d 00h /
90 After minsoc_top.prj update, make regenerated src and xst files. rfajardo 4648d 15h /
89 minsoc_top.prj was splited into minsoc_top and minsoc_bench. minsoc_top still had directory entries of bench, they are gone now. rfajardo 4648d 15h /
88 Project structure, Xilinx Makefiles and simulation working. rfajardo 4648d 15h /
87 Synchronizing scripts to behave exactly the same. rfajardo 4648d 16h /

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.