OpenCores
URL https://opencores.org/ocsvn/minsoc/minsoc/trunk

Subversion Repositories minsoc

[/] [minsoc/] - Rev 134

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
134 run_sim.bat for ModelSim updated to acquire the firmware_size for command line input when running the testbench. rfajardo 3306d 20h /minsoc/
133 Roll back minsoc_bench.v to timed simulation. Merge minsoc_bench_core and minsoc_bench_clock again.

Applying Rubén Diez patch to avoid warnings on firmware load for simulation.
rfajardo 3306d 21h /minsoc/
132 ModelSim simulation, running top_module minsoc_bench_clock now, instead of minsoc_bench. rfajardo 3310d 17h /minsoc/
131 Renaming testbench modules. Adding to ifdefs without which the testbench generation can fail. rfajardo 3310d 17h /minsoc/
130 minsoc_bench.v: task test_eth has to be phased out together with the ETHERNET definition. If there is no ETHERNET, test_eth cannot be defined. rfajardo 3310d 19h /minsoc/
129 Removing bugs introduced when splitting clocks and reset.
1) NEGATIVE_RESET or POSITIVE_RESET were missing as definition on minsoc_bench_clock.v (include minsoc_defines.v).
2) wait for reset on minsoc_bench.v to assert design_ready
rfajardo 3311d 06h /minsoc/
128 Outsourcing clocks and reset generations from minsoc_bench.v to minsoc_bench_clock.v. rfajardo 3311d 07h /minsoc/
127 Removing redundant simulation output. rfajardo 3311d 13h /minsoc/
126 Updating information about simulation time for Ethernet test. rfajardo 3311d 13h /minsoc/
125 Adjusting testbench messages. Creating tasks for firmware tests. rfajardo 3311d 14h /minsoc/
124 Removing Verilog delays from minsoc_bench.v. minsoc_bench_defines.v defines now if uart or ethernet have to be tested. If yes, it checks the behavior of the enclosed firmwares. If not, simulation simply runs forever. rfajardo 3311d 16h /minsoc/
123 Renaming reg final to firmware_size. Final is a keyword for Verilator. rfajardo 3311d 20h /minsoc/
122 Renaming minsoc-configure.sh to minsoc-setup.sh. rfajardo 3317d 10h /minsoc/
121 Asserting svn:executable properties of modelsim/*.bat scripts.

Including corrected patch for advanced debug system watchpoints under utils/setup. Configure script updated to use this instead of advanced debug system patches. This will remain so until the patch is corrected. The previous line still has the correct command.
rfajardo 3317d 11h /minsoc/
120 ethmac.prj: a file was missing rfajardo 3317d 14h /minsoc/
119 Tricking Subversion to accept bat files that are now executable. rfajardo 3317d 15h /minsoc/
118 Configure scripts for Xilinx devices updated. All of them require to update or1200_defines.v. The non-standard part uses now the variable $BOARD to print that this board require non-standard update of files. rfajardo 3317d 15h /minsoc/
117 spartan3e_starter_kit designs require DUALPORT from or1200_defines.v to be active instead of GENERIC. rfajardo 3317d 16h /minsoc/
116 Configure scripts were trying to copy/patch projects files before creating them. Ordering is correct now. rfajardo 3317d 16h /minsoc/
115 configure.sh script dir aware.
minsoc-install.sh logging to script dir.
rfajardo 3317d 17h /minsoc/
114 Installation and Configuration scripts can be run out of any directory.
They assume they are going to process the files and directories found in the directory they are run from.
rfajardo 3317d 17h /minsoc/
113 minsoc-install.sh & minsoc-configure.sh:
-aware of location of configure.sh script
configure.sh:
-does not block on patch error

spartan3e_starter_kit & spartan3e_starter_kit_eth:
-or1200_defines.v updated

prj:
-src/blackboxes/or1200_top.v adjusted to or1200_rel1
-Makefile had a typo regarding altera vhdl files
rfajardo 3317d 17h /minsoc/
112 Updating installation & configuration scripts. rfajardo 3318d 08h /minsoc/
111 minsoc-install.sh: DIR_TO_INSTALL is required before using beautify.sh rfajardo 3318d 09h /minsoc/
110 Fixing several minor issues with the system:
-minsoc-install splitted into installation and configuration
-minsoc-configure.sh can be used to configure a fresh checked out system
-configure script used by both minsoc-configure.sh and minsoc-install.sh to configure

-rtl/verilog: svn externals fixed
-or1200 rolled back to release-1.0

-prj/scripts:
-Makefile has been used by simulation to differentiate project definition of vhdl and verilog files
-Altera was differentiating it in script
-now there are two scripts, one for vhdl and another for verilog. The differentiation occurs in Makefile as for simulation.
-altera_3c25_board/configure scripts had to be updated, vprj and vhdprj file extensions used to differentiate Verilog and VHDL project files.

-prj/src: or1200_top.prj downdated to definition of or1200_v1
rfajardo 3318d 09h /minsoc/
109 Creating a branche for release candidate 1.0. rfajardo 3318d 11h /minsoc/
108 Scripts updates to correct paths when working under Windows. Now, ModelSim, Xilinx and Altera synthesis are working on Windows through batch files.

Icarus Verilog and Altera synthesis are working as well. Job done!
rfajardo 3318d 14h /minsoc/
107 Adding setup batch script for Altera synthesis on Windows.

prj/scripts/altprj.sh has now to check if it is run from cygwin in order to re-formulate the path to windows system.

Maybe the other scripts have to be updated too. This will be checked soon.
rfajardo 3318d 17h /minsoc/
106 Installation script was checking the ENV variable before setting it. rfajardo 3318d 20h /minsoc/
105 Updating configure scripts to copy Windows synthesis launch script setup.bat from either minsoc/syn/altera or minsoc/syn/xilinx to minsoc/syn. rfajardo 3318d 22h /minsoc/

powered by: WebSVN 2.1.0

© copyright 1999-2020 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.