URL https://opencores.org/ocsvn/minsoc/minsoc/trunk

Subversion Repositories minsoc

[/] [minsoc/] [branches/] - Rev 149

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

From rev	To rev	Max revs

Search for

Rev	Log message	Author	Age	Path
148	Renaming minsoc_wave.lxt to minsoc_wave.lxt2 for correctness.	rfajardo	4545d 07h	/minsoc/branches
147	Updating minsoc_bench.v to correctly acquire uart data. Uart drivers: when an end of line character was sent, the driver appended a carriage return to it. This is not necessary and has been removed. -Eth and Uart firmwares also had a carriage return after the end of line, also removed. Minsoc_bench_defines.v: Renaming VCD_OUTPUT define to WAVEFORM_OUTPUT run_bench: selecting -lxt2 for waveform output format. This output format size is 10 times smaller than vcd. minsoc-install.sh: lxt2 output format requires that Icarus Verilog be installed with zlib support. For that, we now check if zlib is supported on script run.	rfajardo	4545d 08h	/minsoc/branches
146	Importing 'Xilinx Microblaze Dev. Kit 1600E Edition' board configuration directory.	ConX.	4545d 14h	/minsoc/branches
145	minsoc_bench_core.v and minsoc_bench_clock.v left only on verilator branche. It will develop there until it is ported for inclusion into trunk. RC-1.0 is now clean of it.	rfajardo	4545d 23h	/minsoc/branches
143	Compiling firmwares in board configuration scripts instead of on global minsoc setup.	rfajardo	4546d 10h	/minsoc/branches
140	Including required modules for verilator simulation.	rfajardo	4546d 11h	/minsoc/branches
139	Creating a verilator branche.	rfajardo	4546d 11h	/minsoc/branches
138	DIR_TO_INSTALL creation using wizard	ConX.	4546d 23h	/minsoc/branches
137	Removing uncomplete support for ml509 and not working support for spartan3e_starter_kit_eth (area constraint cannot be reached).	rfajardo	4547d 10h	/minsoc/branches
136	Installation on Ubuntu-11.10 has shown that a binary called makeinfo is required to install GDB. This binary can be installed on Ubuntu by installing the package texinfo.	rfajardo	4554d 06h	/minsoc/branches
134	run_sim.bat for ModelSim updated to acquire the firmware_size for command line input when running the testbench.	rfajardo	4561d 10h	/minsoc/branches
133	Roll back minsoc_bench.v to timed simulation. Merge minsoc_bench_core and minsoc_bench_clock again. Applying Rubén Diez patch to avoid warnings on firmware load for simulation.	rfajardo	4561d 11h	/minsoc/branches
132	ModelSim simulation, running top_module minsoc_bench_clock now, instead of minsoc_bench.	rfajardo	4565d 07h	/minsoc/branches
131	Renaming testbench modules. Adding to ifdefs without which the testbench generation can fail.	rfajardo	4565d 07h	/minsoc/branches
130	minsoc_bench.v: task test_eth has to be phased out together with the ETHERNET definition. If there is no ETHERNET, test_eth cannot be defined.	rfajardo	4565d 09h	/minsoc/branches
129	Removing bugs introduced when splitting clocks and reset. 1) NEGATIVE_RESET or POSITIVE_RESET were missing as definition on minsoc_bench_clock.v (include minsoc_defines.v). 2) wait for reset on minsoc_bench.v to assert design_ready	rfajardo	4565d 20h	/minsoc/branches
128	Outsourcing clocks and reset generations from minsoc_bench.v to minsoc_bench_clock.v.	rfajardo	4565d 21h	/minsoc/branches
127	Removing redundant simulation output.	rfajardo	4566d 03h	/minsoc/branches
126	Updating information about simulation time for Ethernet test.	rfajardo	4566d 03h	/minsoc/branches
125	Adjusting testbench messages. Creating tasks for firmware tests.	rfajardo	4566d 04h	/minsoc/branches
124	Removing Verilog delays from minsoc_bench.v. minsoc_bench_defines.v defines now if uart or ethernet have to be tested. If yes, it checks the behavior of the enclosed firmwares. If not, simulation simply runs forever.	rfajardo	4566d 05h	/minsoc/branches
123	Renaming reg final to firmware_size. Final is a keyword for Verilator.	rfajardo	4566d 10h	/minsoc/branches
122	Renaming minsoc-configure.sh to minsoc-setup.sh.	rfajardo	4572d 00h	/minsoc/branches
121	Asserting svn:executable properties of modelsim/*.bat scripts. Including corrected patch for advanced debug system watchpoints under utils/setup. Configure script updated to use this instead of advanced debug system patches. This will remain so until the patch is corrected. The previous line still has the correct command.	rfajardo	4572d 01h	/minsoc/branches
120	ethmac.prj: a file was missing	rfajardo	4572d 04h	/minsoc/branches
119	Tricking Subversion to accept bat files that are now executable.	rfajardo	4572d 05h	/minsoc/branches
118	Configure scripts for Xilinx devices updated. All of them require to update or1200_defines.v. The non-standard part uses now the variable $BOARD to print that this board require non-standard update of files.	rfajardo	4572d 05h	/minsoc/branches
117	spartan3e_starter_kit designs require DUALPORT from or1200_defines.v to be active instead of GENERIC.	rfajardo	4572d 05h	/minsoc/branches
116	Configure scripts were trying to copy/patch projects files before creating them. Ordering is correct now.	rfajardo	4572d 06h	/minsoc/branches
115	configure.sh script dir aware. minsoc-install.sh logging to script dir.	rfajardo	4572d 07h	/minsoc/branches

Browse

Tools

Subversion Repositories minsoc

[/] [minsoc/] [branches/] - Rev 149

Filtering Options