| Rev |
Log message |
Author |
Age |
Path |
| 99 |
backend/altera_3c25_board/minsoc_defines.v: if GENERIC_FPGA selected, undefine ALTERA_FPGA and FPGA_FAMILY to avoid vendor specific code to flow into the simulation. If you don't do it, generate_bench fails. |
rfajardo |
4634d 05h |
/minsoc/branches/rc-1.0 |
| 98 |
Removing deprecated minsoc_top.qsf file. |
rfajardo |
4634d 06h |
/minsoc/branches/rc-1.0 |
| 97 |
As proposed by Javier Almansa automatically generated project files for simulation and synthesis are out of revision control. Instead, the backend configure scripts run the prj/Makefile now to generate the project files prior to configuration of SoC for a specific board. |
rfajardo |
4634d 06h |
/minsoc/branches/rc-1.0 |
| 96 |
Some files needed for Altera synthesis |
javieralso |
4634d 17h |
/minsoc/branches/rc-1.0 |
| 95 |
Makefile for Altera FPGAs fixed |
javieralso |
4635d 20h |
/minsoc/branches/rc-1.0 |
| 94 |
Fix bug in minsoc_top.prj for Altera synthesis |
javieralso |
4638d 04h |
/minsoc/branches/rc-1.0 |
| 93 |
Support for Altera synthesis. It needs some tune, but it works fine |
javieralso |
4638d 07h |
/minsoc/branches/rc-1.0 |
| 92 |
backend/spartan3e_starter_kit*: or1200_defines.v file was outdated and hindering synthesis. Probably it would be best if we used a patching system here. But for now, I copied the new files and made the necessary changes to fit the system into the target boards. |
rfajardo |
4639d 05h |
/minsoc/branches/rc-1.0 |
| 91 |
prj/scripts/: Changing scripts not to include multiple timescale.v files from different listed directories in the project definition file. Instead, now the internal loop which look for the file in different directories is broken when the first file is found. |
rfajardo |
4639d 06h |
/minsoc/branches/rc-1.0 |
| 90 |
After minsoc_top.prj update, make regenerated src and xst files. |
rfajardo |
4639d 21h |
/minsoc/branches/rc-1.0 |
| 89 |
minsoc_top.prj was splited into minsoc_top and minsoc_bench. minsoc_top still had directory entries of bench, they are gone now. |
rfajardo |
4639d 21h |
/minsoc/branches/rc-1.0 |
| 88 |
Project structure, Xilinx Makefiles and simulation working. |
rfajardo |
4639d 22h |
/minsoc/branches/rc-1.0 |
| 87 |
Synchronizing scripts to behave exactly the same. |
rfajardo |
4639d 23h |
/minsoc/branches/rc-1.0 |
| 86 |
Updating configure script messages. |
rfajardo |
4639d 23h |
/minsoc/branches/rc-1.0 |
| 85 |
Central project definition under prj. Synthesis and simulation take their project files from here. |
rfajardo |
4639d 23h |
/minsoc/branches/rc-1.0 |
| 84 |
syn/blackboxes/eth_top.v:
-module is now called ethmac instead of eth_top
-eth_defines.v is now called ethmac_defines.v |
rfajardo |
4641d 00h |
/minsoc/branches/rc-1.0 |
| 83 |
minsoc-install.sh: bzip2 program was being used, but its existance on target system was not being verified. It is now. |
rfajardo |
4652d 05h |
/minsoc/branches/rc-1.0 |
| 82 |
minsoc-install.sh: problems with copying the GNU Toolchain from download to tools. We uncompress the GNU Toolchain now once again to tools during the installation part. |
rfajardo |
4655d 04h |
/minsoc/branches/rc-1.0 |
| 81 |
Installation script complete, nice text feedback, output logs and better execution order. |
rfajardo |
4655d 15h |
/minsoc/branches/rc-1.0 |
| 80 |
Establishing a better Makefile system for firmwares. |
rfajardo |
4658d 04h |
/minsoc/branches/rc-1.0 |
| 79 |
minsoc-install.sh: rpath corrected.
required-cygwin-tools: updated |
rfajardo |
4658d 20h |
/minsoc/branches/rc-1.0 |
| 78 |
minsoc-install.sh: Advanced JTAG bridge compilation needs to know where the dynamic libraries are on runtime. Patching (sed) the Makefile to compile it with the rpath to the libraries (libusb/libftdi). |
rfajardo |
4658d 21h |
/minsoc/branches/rc-1.0 |
| 77 |
New tool requirements for installing Icarus Verilog. |
rfajardo |
4658d 21h |
/minsoc/branches/rc-1.0 |
| 76 |
Including a script allowing the installation of MinSoC and all its required tools.
It should be working for all Linuxes and Cygwin. |
rfajardo |
4658d 21h |
/minsoc/branches/rc-1.0 |
| 75 |
Adapting minsoc_top.v and minsoc_verilog_files.txt to new names for top modules and define file of ethmac ip core. |
rfajardo |
4665d 21h |
/minsoc/branches/rc-1.0 |
| 74 |
or1200.h includes a CLABLE macro which uses __USER_LABEL_PREFIX__(from compiler defined macro) to find out if we need the underscore as prefix to reference C functions (its assembly labels) or not.
except.S and reset.S use CLABLE to call externally defined C functions.
This should avoid problems compiling firmware with old or new toolchain.
support/common.mk updated, reset-nocache.o and reset-icdc.o are dependent on or1200.h |
rfajardo |
4758d 20h |
/minsoc/branches/rc-1.0 |
| 73 |
Makefile does not automatic clean anymore. In Windows rm -f leads to errors and abort synthesis.
minsoc/syn/setup.bat added. Asks for Xilinx settings32|64.bat script and completely implements MinSoC. On completion or error, it holds window open until user input ENTER.
minsoc/sim/modelsim/: *.bat holds window open until user input ENTER.
run_sim.bat asks for target firmware, check if it exists before running simulator. Holds window open and output error message if not found. Does not hold for simulator. |
rfajardo |
4759d 01h |
/minsoc/branches/rc-1.0 |
| 72 |
Adding Windows batch files to run a Modelsim simulation.
-prepare_modelsim.bat, compile_design.bat, run_sim.bat |
rfajardo |
4759d 02h |
/minsoc/branches/rc-1.0 |
| 71 |
Modelsim whines about missing timescales:
-minsoc_bench.v, minsoc_memory_model.v and dbg_comm_vpi.v updated to include timescale.v
modelsim simulation working under Windows. Modelsim PE Student Edition 10.0a
Simulation<->adv_jtag_bridge<->gdb communication not working perfectly. I believe VPI module has to be recompiled, used pre-compiled one for now. |
rfajardo |
4759d 04h |
/minsoc/branches/rc-1.0 |
| 70 |
Including a global timescale under minsoc/rtl/verilog to control simulation. It is under the implementation because the implementation files include it.
Removing timescale definition of minsoc_bench_defines.v files.
Creating a modelsim simulation directory. Everything is working under Linux. For Windows, run_sim.sh has to be changed:
-pli ../../bench/verilog/vpi/jp-io-vpi.so
to:
-pli ../../bench/verilog/vpi/jp-io-vpi.dll
These files have to be compiled/copied from minsoc/rtl/verilog/adv_debug_sys/Software/adv_jtag_bridge/sim_lib/modelsim_platform to minsoc/bench/verilog/vpi. |
rfajardo |
4759d 05h |
/minsoc/branches/rc-1.0 |
