Rev |
Log message |
Author |
Age |
Path |
142 |
Updating configure.sh:
1) we don't patch the trunk version.
2) it is better to re-compile the firmwares on reconfiguration. So compiling firmwares went to configure scripts instead.
backend/xxx/configure: compiling firmwares here now. |
rfajardo |
4564d 04h |
/minsoc/trunk |
141 |
Merging with rc-1.0 revision 140. I doubt rc-1.0 will still change much in the last days. |
rfajardo |
4564d 04h |
/minsoc/trunk |
135 |
Installation on Ubuntu-11.10 has shown that package texinfo is required to compiled GDB. This package installs the binary makeinfo. |
rfajardo |
4571d 23h |
/minsoc/trunk |
108 |
Scripts updates to correct paths when working under Windows. Now, ModelSim, Xilinx and Altera synthesis are working on Windows through batch files.
Icarus Verilog and Altera synthesis are working as well. Job done! |
rfajardo |
4590d 22h |
/minsoc/trunk |
107 |
Adding setup batch script for Altera synthesis on Windows.
prj/scripts/altprj.sh has now to check if it is run from cygwin in order to re-formulate the path to windows system.
Maybe the other scripts have to be updated too. This will be checked soon. |
rfajardo |
4591d 01h |
/minsoc/trunk |
106 |
Installation script was checking the ENV variable before setting it. |
rfajardo |
4591d 03h |
/minsoc/trunk |
105 |
Updating configure scripts to copy Windows synthesis launch script setup.bat from either minsoc/syn/altera or minsoc/syn/xilinx to minsoc/syn. |
rfajardo |
4591d 05h |
/minsoc/trunk |
104 |
Enabling modelsim simulation for current project definition.
vhdl and verilog projects have to be separated:
-prj/Makefile defines VHDL_PROJECTS and VERILOG_PROJECTS, they are merged into PROJECTS. Tools which don't care about VHDL or Verilog use PROJECTS list while other tools use VERILOG_ or VHDL_PROJECTS.
-Simulation uses VHDL_PROJECTS and VERILOG_PROJECTS independently.
-prj/scripts/simprj.sh splitted in:
-simvhdl.sh
-simverilog.sh
(they generate the input files in the right format for simulation tools) |
rfajardo |
4598d 04h |
/minsoc/trunk |
103 |
But the file is called gdb-6.8a.tar.bz2, so tar must be run on that name. |
rfajardo |
4600d 19h |
/minsoc/trunk |
102 |
GNU GDB FTP has renamed gdb-6.8 package to gdb-6.8a package. Uncompressed it remains gdb-6.8, so no other changes to script are necessary. |
rfajardo |
4600d 19h |
/minsoc/trunk |
101 |
Documentation, wiki's address updated. |
rfajardo |
4626d 07h |
/minsoc/trunk |
100 |
syn/altera/minsoc_top.qsf: I thought this file was being generated now as project file description. But it is merely a synthesis configuration file and must be here. File re-added. |
rfajardo |
4635d 05h |
/minsoc/trunk |
99 |
backend/altera_3c25_board/minsoc_defines.v: if GENERIC_FPGA selected, undefine ALTERA_FPGA and FPGA_FAMILY to avoid vendor specific code to flow into the simulation. If you don't do it, generate_bench fails. |
rfajardo |
4635d 05h |
/minsoc/trunk |
98 |
Removing deprecated minsoc_top.qsf file. |
rfajardo |
4635d 05h |
/minsoc/trunk |
97 |
As proposed by Javier Almansa automatically generated project files for simulation and synthesis are out of revision control. Instead, the backend configure scripts run the prj/Makefile now to generate the project files prior to configuration of SoC for a specific board. |
rfajardo |
4635d 06h |
/minsoc/trunk |
96 |
Some files needed for Altera synthesis |
javieralso |
4635d 16h |
/minsoc/trunk |
95 |
Makefile for Altera FPGAs fixed |
javieralso |
4636d 19h |
/minsoc/trunk |
94 |
Fix bug in minsoc_top.prj for Altera synthesis |
javieralso |
4639d 04h |
/minsoc/trunk |
93 |
Support for Altera synthesis. It needs some tune, but it works fine |
javieralso |
4639d 07h |
/minsoc/trunk |
92 |
backend/spartan3e_starter_kit*: or1200_defines.v file was outdated and hindering synthesis. Probably it would be best if we used a patching system here. But for now, I copied the new files and made the necessary changes to fit the system into the target boards. |
rfajardo |
4640d 05h |
/minsoc/trunk |
91 |
prj/scripts/: Changing scripts not to include multiple timescale.v files from different listed directories in the project definition file. Instead, now the internal loop which look for the file in different directories is broken when the first file is found. |
rfajardo |
4640d 06h |
/minsoc/trunk |
90 |
After minsoc_top.prj update, make regenerated src and xst files. |
rfajardo |
4640d 21h |
/minsoc/trunk |
89 |
minsoc_top.prj was splited into minsoc_top and minsoc_bench. minsoc_top still had directory entries of bench, they are gone now. |
rfajardo |
4640d 21h |
/minsoc/trunk |
88 |
Project structure, Xilinx Makefiles and simulation working. |
rfajardo |
4640d 22h |
/minsoc/trunk |
87 |
Synchronizing scripts to behave exactly the same. |
rfajardo |
4640d 23h |
/minsoc/trunk |
86 |
Updating configure script messages. |
rfajardo |
4640d 23h |
/minsoc/trunk |
85 |
Central project definition under prj. Synthesis and simulation take their project files from here. |
rfajardo |
4640d 23h |
/minsoc/trunk |
84 |
syn/blackboxes/eth_top.v:
-module is now called ethmac instead of eth_top
-eth_defines.v is now called ethmac_defines.v |
rfajardo |
4641d 23h |
/minsoc/trunk |
83 |
minsoc-install.sh: bzip2 program was being used, but its existance on target system was not being verified. It is now. |
rfajardo |
4653d 05h |
/minsoc/trunk |
82 |
minsoc-install.sh: problems with copying the GNU Toolchain from download to tools. We uncompress the GNU Toolchain now once again to tools during the installation part. |
rfajardo |
4656d 04h |
/minsoc/trunk |