| Rev |
Log message |
Author |
Age |
Path |
| 97 |
As proposed by Javier Almansa automatically generated project files for simulation and synthesis are out of revision control. Instead, the backend configure scripts run the prj/Makefile now to generate the project files prior to configuration of SoC for a specific board. |
rfajardo |
4618d 16h |
/minsoc/trunk/ |
| 96 |
Some files needed for Altera synthesis |
javieralso |
4619d 03h |
/minsoc/trunk/ |
| 95 |
Makefile for Altera FPGAs fixed |
javieralso |
4620d 06h |
/minsoc/trunk/ |
| 94 |
Fix bug in minsoc_top.prj for Altera synthesis |
javieralso |
4622d 15h |
/minsoc/trunk/ |
| 93 |
Support for Altera synthesis. It needs some tune, but it works fine |
javieralso |
4622d 18h |
/minsoc/trunk/ |
| 92 |
backend/spartan3e_starter_kit*: or1200_defines.v file was outdated and hindering synthesis. Probably it would be best if we used a patching system here. But for now, I copied the new files and made the necessary changes to fit the system into the target boards. |
rfajardo |
4623d 16h |
/minsoc/trunk/ |
| 91 |
prj/scripts/: Changing scripts not to include multiple timescale.v files from different listed directories in the project definition file. Instead, now the internal loop which look for the file in different directories is broken when the first file is found. |
rfajardo |
4623d 17h |
/minsoc/trunk/ |
| 90 |
After minsoc_top.prj update, make regenerated src and xst files. |
rfajardo |
4624d 08h |
/minsoc/trunk/ |
| 89 |
minsoc_top.prj was splited into minsoc_top and minsoc_bench. minsoc_top still had directory entries of bench, they are gone now. |
rfajardo |
4624d 08h |
/minsoc/trunk/ |
| 88 |
Project structure, Xilinx Makefiles and simulation working. |
rfajardo |
4624d 08h |
/minsoc/trunk/ |
| 87 |
Synchronizing scripts to behave exactly the same. |
rfajardo |
4624d 10h |
/minsoc/trunk/ |
| 86 |
Updating configure script messages. |
rfajardo |
4624d 10h |
/minsoc/trunk/ |
| 85 |
Central project definition under prj. Synthesis and simulation take their project files from here. |
rfajardo |
4624d 10h |
/minsoc/trunk/ |
| 84 |
syn/blackboxes/eth_top.v:
-module is now called ethmac instead of eth_top
-eth_defines.v is now called ethmac_defines.v |
rfajardo |
4625d 10h |
/minsoc/trunk/ |
| 83 |
minsoc-install.sh: bzip2 program was being used, but its existance on target system was not being verified. It is now. |
rfajardo |
4636d 16h |
/minsoc/trunk/ |
| 82 |
minsoc-install.sh: problems with copying the GNU Toolchain from download to tools. We uncompress the GNU Toolchain now once again to tools during the installation part. |
rfajardo |
4639d 15h |
/minsoc/trunk/ |
| 81 |
Installation script complete, nice text feedback, output logs and better execution order. |
rfajardo |
4640d 02h |
/minsoc/trunk/ |
| 80 |
Establishing a better Makefile system for firmwares. |
rfajardo |
4642d 14h |
/minsoc/trunk/ |
| 79 |
minsoc-install.sh: rpath corrected.
required-cygwin-tools: updated |
rfajardo |
4643d 07h |
/minsoc/trunk/ |
| 78 |
minsoc-install.sh: Advanced JTAG bridge compilation needs to know where the dynamic libraries are on runtime. Patching (sed) the Makefile to compile it with the rpath to the libraries (libusb/libftdi). |
rfajardo |
4643d 07h |
/minsoc/trunk/ |
| 77 |
New tool requirements for installing Icarus Verilog. |
rfajardo |
4643d 08h |
/minsoc/trunk/ |
| 76 |
Including a script allowing the installation of MinSoC and all its required tools.
It should be working for all Linuxes and Cygwin. |
rfajardo |
4643d 08h |
/minsoc/trunk/ |
| 75 |
Adapting minsoc_top.v and minsoc_verilog_files.txt to new names for top modules and define file of ethmac ip core. |
rfajardo |
4650d 08h |
/minsoc/trunk/ |
| 74 |
or1200.h includes a CLABLE macro which uses __USER_LABEL_PREFIX__(from compiler defined macro) to find out if we need the underscore as prefix to reference C functions (its assembly labels) or not.
except.S and reset.S use CLABLE to call externally defined C functions.
This should avoid problems compiling firmware with old or new toolchain.
support/common.mk updated, reset-nocache.o and reset-icdc.o are dependent on or1200.h |
rfajardo |
4743d 06h |
/minsoc/trunk/ |
| 73 |
Makefile does not automatic clean anymore. In Windows rm -f leads to errors and abort synthesis.
minsoc/syn/setup.bat added. Asks for Xilinx settings32|64.bat script and completely implements MinSoC. On completion or error, it holds window open until user input ENTER.
minsoc/sim/modelsim/: *.bat holds window open until user input ENTER.
run_sim.bat asks for target firmware, check if it exists before running simulator. Holds window open and output error message if not found. Does not hold for simulator. |
rfajardo |
4743d 11h |
/minsoc/trunk/ |
| 72 |
Adding Windows batch files to run a Modelsim simulation.
-prepare_modelsim.bat, compile_design.bat, run_sim.bat |
rfajardo |
4743d 12h |
/minsoc/trunk/ |
| 71 |
Modelsim whines about missing timescales:
-minsoc_bench.v, minsoc_memory_model.v and dbg_comm_vpi.v updated to include timescale.v
modelsim simulation working under Windows. Modelsim PE Student Edition 10.0a
Simulation<->adv_jtag_bridge<->gdb communication not working perfectly. I believe VPI module has to be recompiled, used pre-compiled one for now. |
rfajardo |
4743d 15h |
/minsoc/trunk/ |
| 70 |
Including a global timescale under minsoc/rtl/verilog to control simulation. It is under the implementation because the implementation files include it.
Removing timescale definition of minsoc_bench_defines.v files.
Creating a modelsim simulation directory. Everything is working under Linux. For Windows, run_sim.sh has to be changed:
-pli ../../bench/verilog/vpi/jp-io-vpi.so
to:
-pli ../../bench/verilog/vpi/jp-io-vpi.dll
These files have to be compiled/copied from minsoc/rtl/verilog/adv_debug_sys/Software/adv_jtag_bridge/sim_lib/modelsim_platform to minsoc/bench/verilog/vpi. |
rfajardo |
4743d 15h |
/minsoc/trunk/ |
| 69 |
backend update:
-minsoc_bench_defines.v
-gcc-opt.mk
Both files should now be under minsoc/backend to proper system functionality.
backend subdirectories have been given those files. Configure script updated accordingly.
They are searched there from system scripts and Makefiles.
-sim/bin/minsoc_verilog_files.txt has the files for Icarus Verilog, minsoc_bench_defines.v is now referenced from backend directory.
-sw/support/Makefile.inc now references to gcc-opt.mk inside backend.
backend/spartan3e_starter_kit_eth:
-It is the system configuration for Spartan 3E Starter Kit with Ethernet. |
rfajardo |
4748d 07h |
/minsoc/trunk/ |
| 68 |
Still one configuration mismatch on minsoc_defines.v:
-MEMORY_ADR_WIDTH now 15
-orp.ld is defined accordingly |
rfajardo |
4750d 11h |
/minsoc/trunk/ |
