OpenCores
URL https://opencores.org/ocsvn/minsoc/minsoc/trunk

Subversion Repositories minsoc

[/] [minsoc/] [trunk/] [backend/] [spartan3e_starter_kit/] - Rev 165

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
158 Adding de2_115_board port, thanks to Richard Hasha.

Support to JSP (JTAG Serial Port) working well. Also provided by Richard Hasha.

Different interconnect configurations per board are not straightforward on MinSoC. New added modules or definitions for addresses have to be carried over to other boards. Furthermore, extra modules can be shared among all projects. Thus, it is better to have this centralized:
-Removing interconnect configuration from minsoc_defines.v. There is an interconnect_defines.v file on rtl/verilog. The software counterpart is interconnect.h on sw/drivers.

Including a jsp firmware. It is basically the uart firmware but using JSP instead. Added to all board configure scripts to be compiled on configuration.

prj/srcs extended to include jsp and interconnec_defines.v.

spartan3e_starter_kit_eth lost UART (does not fit) and uses JSP instead now.
rfajardo 2867d 08h /minsoc/trunk/backend/spartan3e_starter_kit/
149 Merging differences of release candidate 1.0 revision 140:148 with trunk. rfajardo 2905d 18h /minsoc/trunk/backend/spartan3e_starter_kit/
144 Updating configure scripts. Calling make into the right directories now. rfajardo 2911d 17h /minsoc/trunk/backend/spartan3e_starter_kit/
142 Updating configure.sh:
1) we don't patch the trunk version.
2) it is better to re-compile the firmwares on reconfiguration. So compiling firmwares went to configure scripts instead.

backend/xxx/configure: compiling firmwares here now.
rfajardo 2911d 17h /minsoc/trunk/backend/spartan3e_starter_kit/
141 Merging with rc-1.0 revision 140. I doubt rc-1.0 will still change much in the last days. rfajardo 2911d 17h /minsoc/trunk/backend/spartan3e_starter_kit/
105 Updating configure scripts to copy Windows synthesis launch script setup.bat from either minsoc/syn/altera or minsoc/syn/xilinx to minsoc/syn. rfajardo 2938d 18h /minsoc/trunk/backend/spartan3e_starter_kit/
97 As proposed by Javier Almansa automatically generated project files for simulation and synthesis are out of revision control. Instead, the backend configure scripts run the prj/Makefile now to generate the project files prior to configuration of SoC for a specific board. rfajardo 2982d 19h /minsoc/trunk/backend/spartan3e_starter_kit/
92 backend/spartan3e_starter_kit*: or1200_defines.v file was outdated and hindering synthesis. Probably it would be best if we used a patching system here. But for now, I copied the new files and made the necessary changes to fit the system into the target boards. rfajardo 2987d 18h /minsoc/trunk/backend/spartan3e_starter_kit/
88 Project structure, Xilinx Makefiles and simulation working. rfajardo 2988d 11h /minsoc/trunk/backend/spartan3e_starter_kit/
87 Synchronizing scripts to behave exactly the same. rfajardo 2988d 12h /minsoc/trunk/backend/spartan3e_starter_kit/
86 Updating configure script messages. rfajardo 2988d 12h /minsoc/trunk/backend/spartan3e_starter_kit/
85 Central project definition under prj. Synthesis and simulation take their project files from here. rfajardo 2988d 12h /minsoc/trunk/backend/spartan3e_starter_kit/
80 Establishing a better Makefile system for firmwares. rfajardo 3006d 16h /minsoc/trunk/backend/spartan3e_starter_kit/
70 Including a global timescale under minsoc/rtl/verilog to control simulation. It is under the implementation because the implementation files include it.

Removing timescale definition of minsoc_bench_defines.v files.

Creating a modelsim simulation directory. Everything is working under Linux. For Windows, run_sim.sh has to be changed:
-pli ../../bench/verilog/vpi/jp-io-vpi.so
to:
-pli ../../bench/verilog/vpi/jp-io-vpi.dll

These files have to be compiled/copied from minsoc/rtl/verilog/adv_debug_sys/Software/adv_jtag_bridge/sim_lib/modelsim_platform to minsoc/bench/verilog/vpi.
rfajardo 3107d 17h /minsoc/trunk/backend/spartan3e_starter_kit/
69 backend update:
-minsoc_bench_defines.v
-gcc-opt.mk
Both files should now be under minsoc/backend to proper system functionality.
backend subdirectories have been given those files. Configure script updated accordingly.

They are searched there from system scripts and Makefiles.
-sim/bin/minsoc_verilog_files.txt has the files for Icarus Verilog, minsoc_bench_defines.v is now referenced from backend directory.
-sw/support/Makefile.inc now references to gcc-opt.mk inside backend.

backend/spartan3e_starter_kit_eth:
-It is the system configuration for Spartan 3E Starter Kit with Ethernet.
rfajardo 3112d 09h /minsoc/trunk/backend/spartan3e_starter_kit/
66 spartan3e_starter_kit requires special configuration of or1200_r3.

For that, configure script was specially adapted and that is reported on script execution.

For release-1.0 of MinSoC this should not be required, because or1200_r1 already has the
required configuration.
rfajardo 3114d 14h /minsoc/trunk/backend/spartan3e_starter_kit/
64 firmware makefiles:
-every firmware makefile has now complete dependency. This also includes dependency on files under minsoc/backend (target specific files). That means, that if some target specific header changes, the support library dependent on it will be compiled. That will always happen, even if you compile the uart firmware. In other words, if you want to use uart firmware, you can always simply compile uart by issuing make all. If anything has changed, backend files, support library, drivers, it will update everything for you.
-TODO: dependency can be automatic created by using make together with gcc. Use it instead of declaring all dependencies manually.

Makefile system for synthesis:
-the dependency for every implementation step has been checked and is working fine.
-Makefile plus support files have been moved to minsoc/syn/src
-make usage is still under syn through files generated by backend bashscripts
Backend:
-files under backend are target specific files used for the system to work
-firmware compilation
-system simulation
-system implementation
-This directory is populated by visiting one of its subdirectories and typing ./configure

backend/spartan3a_dsp_kit:
-working on FPGA

backend/spartan3e_starter_kit:
-has to be tested

backend/ml509:
-missing files have to be copied and adapted, configure script has to be copied and adapted

backend/std:
-include files necessary for firmware compilation and system configuration
-it does not include files for synthesis and is not synthesizable
rfajardo 3114d 17h /minsoc/trunk/backend/spartan3e_starter_kit/

powered by: WebSVN 2.1.0

© copyright 1999-2019 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.