OpenCores
URL https://opencores.org/ocsvn/minsoc/minsoc/trunk

Subversion Repositories minsoc

[/] [minsoc/] [trunk/] [prj/] - Rev 173

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
158 Adding de2_115_board port, thanks to Richard Hasha.

Support to JSP (JTAG Serial Port) working well. Also provided by Richard Hasha.

Different interconnect configurations per board are not straightforward on MinSoC. New added modules or definitions for addresses have to be carried over to other boards. Furthermore, extra modules can be shared among all projects. Thus, it is better to have this centralized:
-Removing interconnect configuration from minsoc_defines.v. There is an interconnect_defines.v file on rtl/verilog. The software counterpart is interconnect.h on sw/drivers.

Including a jsp firmware. It is basically the uart firmware but using JSP instead. Added to all board configure scripts to be compiled on configuration.

prj/srcs extended to include jsp and interconnec_defines.v.

spartan3e_starter_kit_eth lost UART (does not fit) and uses JSP instead now.
rfajardo 2867d 07h /minsoc/trunk/prj/
141 Merging with rc-1.0 revision 140. I doubt rc-1.0 will still change much in the last days. rfajardo 2911d 16h /minsoc/trunk/prj/
108 Scripts updates to correct paths when working under Windows. Now, ModelSim, Xilinx and Altera synthesis are working on Windows through batch files.

Icarus Verilog and Altera synthesis are working as well. Job done!
rfajardo 2938d 10h /minsoc/trunk/prj/
107 Adding setup batch script for Altera synthesis on Windows.

prj/scripts/altprj.sh has now to check if it is run from cygwin in order to re-formulate the path to windows system.

Maybe the other scripts have to be updated too. This will be checked soon.
rfajardo 2938d 13h /minsoc/trunk/prj/
104 Enabling modelsim simulation for current project definition.
vhdl and verilog projects have to be separated:
-prj/Makefile defines VHDL_PROJECTS and VERILOG_PROJECTS, they are merged into PROJECTS. Tools which don't care about VHDL or Verilog use PROJECTS list while other tools use VERILOG_ or VHDL_PROJECTS.
-Simulation uses VHDL_PROJECTS and VERILOG_PROJECTS independently.
-prj/scripts/simprj.sh splitted in:
-simvhdl.sh
-simverilog.sh
(they generate the input files in the right format for simulation tools)
rfajardo 2945d 16h /minsoc/trunk/prj/
97 As proposed by Javier Almansa automatically generated project files for simulation and synthesis are out of revision control. Instead, the backend configure scripts run the prj/Makefile now to generate the project files prior to configuration of SoC for a specific board. rfajardo 2982d 18h /minsoc/trunk/prj/
96 Some files needed for Altera synthesis javieralso 2983d 05h /minsoc/trunk/prj/
95 Makefile for Altera FPGAs fixed javieralso 2984d 08h /minsoc/trunk/prj/
94 Fix bug in minsoc_top.prj for Altera synthesis javieralso 2986d 17h /minsoc/trunk/prj/
93 Support for Altera synthesis. It needs some tune, but it works fine javieralso 2986d 19h /minsoc/trunk/prj/
91 prj/scripts/: Changing scripts not to include multiple timescale.v files from different listed directories in the project definition file. Instead, now the internal loop which look for the file in different directories is broken when the first file is found. rfajardo 2987d 18h /minsoc/trunk/prj/
90 After minsoc_top.prj update, make regenerated src and xst files. rfajardo 2988d 10h /minsoc/trunk/prj/
89 minsoc_top.prj was splited into minsoc_top and minsoc_bench. minsoc_top still had directory entries of bench, they are gone now. rfajardo 2988d 10h /minsoc/trunk/prj/
88 Project structure, Xilinx Makefiles and simulation working. rfajardo 2988d 10h /minsoc/trunk/prj/
85 Central project definition under prj. Synthesis and simulation take their project files from here. rfajardo 2988d 11h /minsoc/trunk/prj/

powered by: WebSVN 2.1.0

© copyright 1999-2019 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.