Rev |
Log message |
Author |
Age |
Path |
142 |
Updating configure.sh:
1) we don't patch the trunk version.
2) it is better to re-compile the firmwares on reconfiguration. So compiling firmwares went to configure scripts instead.
backend/xxx/configure: compiling firmwares here now. |
rfajardo |
4550d 03h |
/minsoc/trunk |
141 |
Merging with rc-1.0 revision 140. I doubt rc-1.0 will still change much in the last days. |
rfajardo |
4550d 03h |
/minsoc/trunk |
135 |
Installation on Ubuntu-11.10 has shown that package texinfo is required to compiled GDB. This package installs the binary makeinfo. |
rfajardo |
4557d 23h |
/minsoc/trunk |
108 |
Scripts updates to correct paths when working under Windows. Now, ModelSim, Xilinx and Altera synthesis are working on Windows through batch files.
Icarus Verilog and Altera synthesis are working as well. Job done! |
rfajardo |
4576d 21h |
/minsoc/trunk |
107 |
Adding setup batch script for Altera synthesis on Windows.
prj/scripts/altprj.sh has now to check if it is run from cygwin in order to re-formulate the path to windows system.
Maybe the other scripts have to be updated too. This will be checked soon. |
rfajardo |
4577d 00h |
/minsoc/trunk |
106 |
Installation script was checking the ENV variable before setting it. |
rfajardo |
4577d 03h |
/minsoc/trunk |
105 |
Updating configure scripts to copy Windows synthesis launch script setup.bat from either minsoc/syn/altera or minsoc/syn/xilinx to minsoc/syn. |
rfajardo |
4577d 05h |
/minsoc/trunk |
104 |
Enabling modelsim simulation for current project definition.
vhdl and verilog projects have to be separated:
-prj/Makefile defines VHDL_PROJECTS and VERILOG_PROJECTS, they are merged into PROJECTS. Tools which don't care about VHDL or Verilog use PROJECTS list while other tools use VERILOG_ or VHDL_PROJECTS.
-Simulation uses VHDL_PROJECTS and VERILOG_PROJECTS independently.
-prj/scripts/simprj.sh splitted in:
-simvhdl.sh
-simverilog.sh
(they generate the input files in the right format for simulation tools) |
rfajardo |
4584d 04h |
/minsoc/trunk |
103 |
But the file is called gdb-6.8a.tar.bz2, so tar must be run on that name. |
rfajardo |
4586d 19h |
/minsoc/trunk |
102 |
GNU GDB FTP has renamed gdb-6.8 package to gdb-6.8a package. Uncompressed it remains gdb-6.8, so no other changes to script are necessary. |
rfajardo |
4586d 19h |
/minsoc/trunk |
101 |
Documentation, wiki's address updated. |
rfajardo |
4612d 07h |
/minsoc/trunk |
100 |
syn/altera/minsoc_top.qsf: I thought this file was being generated now as project file description. But it is merely a synthesis configuration file and must be here. File re-added. |
rfajardo |
4621d 04h |
/minsoc/trunk |
99 |
backend/altera_3c25_board/minsoc_defines.v: if GENERIC_FPGA selected, undefine ALTERA_FPGA and FPGA_FAMILY to avoid vendor specific code to flow into the simulation. If you don't do it, generate_bench fails. |
rfajardo |
4621d 05h |
/minsoc/trunk |
98 |
Removing deprecated minsoc_top.qsf file. |
rfajardo |
4621d 05h |
/minsoc/trunk |
97 |
As proposed by Javier Almansa automatically generated project files for simulation and synthesis are out of revision control. Instead, the backend configure scripts run the prj/Makefile now to generate the project files prior to configuration of SoC for a specific board. |
rfajardo |
4621d 05h |
/minsoc/trunk |
96 |
Some files needed for Altera synthesis |
javieralso |
4621d 16h |
/minsoc/trunk |
95 |
Makefile for Altera FPGAs fixed |
javieralso |
4622d 19h |
/minsoc/trunk |
94 |
Fix bug in minsoc_top.prj for Altera synthesis |
javieralso |
4625d 04h |
/minsoc/trunk |
93 |
Support for Altera synthesis. It needs some tune, but it works fine |
javieralso |
4625d 06h |
/minsoc/trunk |
92 |
backend/spartan3e_starter_kit*: or1200_defines.v file was outdated and hindering synthesis. Probably it would be best if we used a patching system here. But for now, I copied the new files and made the necessary changes to fit the system into the target boards. |
rfajardo |
4626d 04h |
/minsoc/trunk |
91 |
prj/scripts/: Changing scripts not to include multiple timescale.v files from different listed directories in the project definition file. Instead, now the internal loop which look for the file in different directories is broken when the first file is found. |
rfajardo |
4626d 05h |
/minsoc/trunk |
90 |
After minsoc_top.prj update, make regenerated src and xst files. |
rfajardo |
4626d 21h |
/minsoc/trunk |
89 |
minsoc_top.prj was splited into minsoc_top and minsoc_bench. minsoc_top still had directory entries of bench, they are gone now. |
rfajardo |
4626d 21h |
/minsoc/trunk |
88 |
Project structure, Xilinx Makefiles and simulation working. |
rfajardo |
4626d 21h |
/minsoc/trunk |
87 |
Synchronizing scripts to behave exactly the same. |
rfajardo |
4626d 22h |
/minsoc/trunk |
86 |
Updating configure script messages. |
rfajardo |
4626d 22h |
/minsoc/trunk |
85 |
Central project definition under prj. Synthesis and simulation take their project files from here. |
rfajardo |
4626d 22h |
/minsoc/trunk |
84 |
syn/blackboxes/eth_top.v:
-module is now called ethmac instead of eth_top
-eth_defines.v is now called ethmac_defines.v |
rfajardo |
4627d 23h |
/minsoc/trunk |
83 |
minsoc-install.sh: bzip2 program was being used, but its existance on target system was not being verified. It is now. |
rfajardo |
4639d 04h |
/minsoc/trunk |
82 |
minsoc-install.sh: problems with copying the GNU Toolchain from download to tools. We uncompress the GNU Toolchain now once again to tools during the installation part. |
rfajardo |
4642d 04h |
/minsoc/trunk |