| Rev |
Log message |
Author |
Age |
Path |
| 158 |
Adding de2_115_board port, thanks to Richard Hasha.
Support to JSP (JTAG Serial Port) working well. Also provided by Richard Hasha.
Different interconnect configurations per board are not straightforward on MinSoC. New added modules or definitions for addresses have to be carried over to other boards. Furthermore, extra modules can be shared among all projects. Thus, it is better to have this centralized:
-Removing interconnect configuration from minsoc_defines.v. There is an interconnect_defines.v file on rtl/verilog. The software counterpart is interconnect.h on sw/drivers.
Including a jsp firmware. It is basically the uart firmware but using JSP instead. Added to all board configure scripts to be compiled on configuration.
prj/srcs extended to include jsp and interconnec_defines.v.
spartan3e_starter_kit_eth lost UART (does not fit) and uses JSP instead now. |
rfajardo |
4726d 12h |
/minsoc/trunk |
| 157 |
Removed obsolete file; the changes in this version have been merged into
the mainline advanced debug system version 3.0 and higher. |
nyawn |
4732d 07h |
/minsoc/trunk |
| 156 |
Added hardware watchpoint indicators to debug unit break input, to allow
the debugger to break when a hardware watchpoint is triggered. |
nyawn |
4732d 07h |
/minsoc/trunk |
| 155 |
Decreased wait time, for faster simulations. |
nyawn |
4732d 07h |
/minsoc/trunk |
| 154 |
Modified to use the new autotools support in the advanced debug system v3.0. |
nyawn |
4732d 07h |
/minsoc/trunk |
| 149 |
Merging differences of release candidate 1.0 revision 140:148 with trunk. |
rfajardo |
4764d 21h |
/minsoc/trunk |
| 144 |
Updating configure scripts. Calling make into the right directories now. |
rfajardo |
4770d 20h |
/minsoc/trunk |
| 142 |
Updating configure.sh:
1) we don't patch the trunk version.
2) it is better to re-compile the firmwares on reconfiguration. So compiling firmwares went to configure scripts instead.
backend/xxx/configure: compiling firmwares here now. |
rfajardo |
4770d 21h |
/minsoc/trunk |
| 141 |
Merging with rc-1.0 revision 140. I doubt rc-1.0 will still change much in the last days. |
rfajardo |
4770d 21h |
/minsoc/trunk |
| 135 |
Installation on Ubuntu-11.10 has shown that package texinfo is required to compiled GDB. This package installs the binary makeinfo. |
rfajardo |
4778d 16h |
/minsoc/trunk |
| 108 |
Scripts updates to correct paths when working under Windows. Now, ModelSim, Xilinx and Altera synthesis are working on Windows through batch files.
Icarus Verilog and Altera synthesis are working as well. Job done! |
rfajardo |
4797d 15h |
/minsoc/trunk |
| 107 |
Adding setup batch script for Altera synthesis on Windows.
prj/scripts/altprj.sh has now to check if it is run from cygwin in order to re-formulate the path to windows system.
Maybe the other scripts have to be updated too. This will be checked soon. |
rfajardo |
4797d 18h |
/minsoc/trunk |
| 106 |
Installation script was checking the ENV variable before setting it. |
rfajardo |
4797d 20h |
/minsoc/trunk |
| 105 |
Updating configure scripts to copy Windows synthesis launch script setup.bat from either minsoc/syn/altera or minsoc/syn/xilinx to minsoc/syn. |
rfajardo |
4797d 22h |
/minsoc/trunk |
| 104 |
Enabling modelsim simulation for current project definition.
vhdl and verilog projects have to be separated:
-prj/Makefile defines VHDL_PROJECTS and VERILOG_PROJECTS, they are merged into PROJECTS. Tools which don't care about VHDL or Verilog use PROJECTS list while other tools use VERILOG_ or VHDL_PROJECTS.
-Simulation uses VHDL_PROJECTS and VERILOG_PROJECTS independently.
-prj/scripts/simprj.sh splitted in:
-simvhdl.sh
-simverilog.sh
(they generate the input files in the right format for simulation tools) |
rfajardo |
4804d 21h |
/minsoc/trunk |
| 103 |
But the file is called gdb-6.8a.tar.bz2, so tar must be run on that name. |
rfajardo |
4807d 12h |
/minsoc/trunk |
| 102 |
GNU GDB FTP has renamed gdb-6.8 package to gdb-6.8a package. Uncompressed it remains gdb-6.8, so no other changes to script are necessary. |
rfajardo |
4807d 12h |
/minsoc/trunk |
| 101 |
Documentation, wiki's address updated. |
rfajardo |
4833d 00h |
/minsoc/trunk |
| 100 |
syn/altera/minsoc_top.qsf: I thought this file was being generated now as project file description. But it is merely a synthesis configuration file and must be here. File re-added. |
rfajardo |
4841d 22h |
/minsoc/trunk |
| 99 |
backend/altera_3c25_board/minsoc_defines.v: if GENERIC_FPGA selected, undefine ALTERA_FPGA and FPGA_FAMILY to avoid vendor specific code to flow into the simulation. If you don't do it, generate_bench fails. |
rfajardo |
4841d 22h |
/minsoc/trunk |
| 98 |
Removing deprecated minsoc_top.qsf file. |
rfajardo |
4841d 22h |
/minsoc/trunk |
| 97 |
As proposed by Javier Almansa automatically generated project files for simulation and synthesis are out of revision control. Instead, the backend configure scripts run the prj/Makefile now to generate the project files prior to configuration of SoC for a specific board. |
rfajardo |
4841d 23h |
/minsoc/trunk |
| 96 |
Some files needed for Altera synthesis |
javieralso |
4842d 09h |
/minsoc/trunk |
| 95 |
Makefile for Altera FPGAs fixed |
javieralso |
4843d 12h |
/minsoc/trunk |
| 94 |
Fix bug in minsoc_top.prj for Altera synthesis |
javieralso |
4845d 21h |
/minsoc/trunk |
| 93 |
Support for Altera synthesis. It needs some tune, but it works fine |
javieralso |
4846d 00h |
/minsoc/trunk |
| 92 |
backend/spartan3e_starter_kit*: or1200_defines.v file was outdated and hindering synthesis. Probably it would be best if we used a patching system here. But for now, I copied the new files and made the necessary changes to fit the system into the target boards. |
rfajardo |
4846d 22h |
/minsoc/trunk |
| 91 |
prj/scripts/: Changing scripts not to include multiple timescale.v files from different listed directories in the project definition file. Instead, now the internal loop which look for the file in different directories is broken when the first file is found. |
rfajardo |
4846d 23h |
/minsoc/trunk |
| 90 |
After minsoc_top.prj update, make regenerated src and xst files. |
rfajardo |
4847d 14h |
/minsoc/trunk |
| 89 |
minsoc_top.prj was splited into minsoc_top and minsoc_bench. minsoc_top still had directory entries of bench, they are gone now. |
rfajardo |
4847d 14h |
/minsoc/trunk |
