Rev |
Log message |
Author |
Age |
Path |
100 |
syn/altera/minsoc_top.qsf: I thought this file was being generated now as project file description. But it is merely a synthesis configuration file and must be here. File re-added. |
rfajardo |
4631d 16h |
/minsoc |
99 |
backend/altera_3c25_board/minsoc_defines.v: if GENERIC_FPGA selected, undefine ALTERA_FPGA and FPGA_FAMILY to avoid vendor specific code to flow into the simulation. If you don't do it, generate_bench fails. |
rfajardo |
4631d 16h |
/minsoc |
98 |
Removing deprecated minsoc_top.qsf file. |
rfajardo |
4631d 17h |
/minsoc |
97 |
As proposed by Javier Almansa automatically generated project files for simulation and synthesis are out of revision control. Instead, the backend configure scripts run the prj/Makefile now to generate the project files prior to configuration of SoC for a specific board. |
rfajardo |
4631d 17h |
/minsoc |
96 |
Some files needed for Altera synthesis |
javieralso |
4632d 03h |
/minsoc |
95 |
Makefile for Altera FPGAs fixed |
javieralso |
4633d 07h |
/minsoc |
94 |
Fix bug in minsoc_top.prj for Altera synthesis |
javieralso |
4635d 15h |
/minsoc |
93 |
Support for Altera synthesis. It needs some tune, but it works fine |
javieralso |
4635d 18h |
/minsoc |
92 |
backend/spartan3e_starter_kit*: or1200_defines.v file was outdated and hindering synthesis. Probably it would be best if we used a patching system here. But for now, I copied the new files and made the necessary changes to fit the system into the target boards. |
rfajardo |
4636d 16h |
/minsoc |
91 |
prj/scripts/: Changing scripts not to include multiple timescale.v files from different listed directories in the project definition file. Instead, now the internal loop which look for the file in different directories is broken when the first file is found. |
rfajardo |
4636d 17h |
/minsoc |
90 |
After minsoc_top.prj update, make regenerated src and xst files. |
rfajardo |
4637d 08h |
/minsoc |
89 |
minsoc_top.prj was splited into minsoc_top and minsoc_bench. minsoc_top still had directory entries of bench, they are gone now. |
rfajardo |
4637d 08h |
/minsoc |
88 |
Project structure, Xilinx Makefiles and simulation working. |
rfajardo |
4637d 09h |
/minsoc |
87 |
Synchronizing scripts to behave exactly the same. |
rfajardo |
4637d 10h |
/minsoc |
86 |
Updating configure script messages. |
rfajardo |
4637d 10h |
/minsoc |
85 |
Central project definition under prj. Synthesis and simulation take their project files from here. |
rfajardo |
4637d 10h |
/minsoc |
84 |
syn/blackboxes/eth_top.v:
-module is now called ethmac instead of eth_top
-eth_defines.v is now called ethmac_defines.v |
rfajardo |
4638d 11h |
/minsoc |
83 |
minsoc-install.sh: bzip2 program was being used, but its existance on target system was not being verified. It is now. |
rfajardo |
4649d 16h |
/minsoc |
82 |
minsoc-install.sh: problems with copying the GNU Toolchain from download to tools. We uncompress the GNU Toolchain now once again to tools during the installation part. |
rfajardo |
4652d 15h |
/minsoc |
81 |
Installation script complete, nice text feedback, output logs and better execution order. |
rfajardo |
4653d 02h |
/minsoc |
80 |
Establishing a better Makefile system for firmwares. |
rfajardo |
4655d 15h |
/minsoc |
79 |
minsoc-install.sh: rpath corrected.
required-cygwin-tools: updated |
rfajardo |
4656d 07h |
/minsoc |
78 |
minsoc-install.sh: Advanced JTAG bridge compilation needs to know where the dynamic libraries are on runtime. Patching (sed) the Makefile to compile it with the rpath to the libraries (libusb/libftdi). |
rfajardo |
4656d 08h |
/minsoc |
77 |
New tool requirements for installing Icarus Verilog. |
rfajardo |
4656d 08h |
/minsoc |
76 |
Including a script allowing the installation of MinSoC and all its required tools.
It should be working for all Linuxes and Cygwin. |
rfajardo |
4656d 08h |
/minsoc |
75 |
Adapting minsoc_top.v and minsoc_verilog_files.txt to new names for top modules and define file of ethmac ip core. |
rfajardo |
4663d 08h |
/minsoc |
74 |
or1200.h includes a CLABLE macro which uses __USER_LABEL_PREFIX__(from compiler defined macro) to find out if we need the underscore as prefix to reference C functions (its assembly labels) or not.
except.S and reset.S use CLABLE to call externally defined C functions.
This should avoid problems compiling firmware with old or new toolchain.
support/common.mk updated, reset-nocache.o and reset-icdc.o are dependent on or1200.h |
rfajardo |
4756d 07h |
/minsoc |
73 |
Makefile does not automatic clean anymore. In Windows rm -f leads to errors and abort synthesis.
minsoc/syn/setup.bat added. Asks for Xilinx settings32|64.bat script and completely implements MinSoC. On completion or error, it holds window open until user input ENTER.
minsoc/sim/modelsim/: *.bat holds window open until user input ENTER.
run_sim.bat asks for target firmware, check if it exists before running simulator. Holds window open and output error message if not found. Does not hold for simulator. |
rfajardo |
4756d 12h |
/minsoc |
72 |
Adding Windows batch files to run a Modelsim simulation.
-prepare_modelsim.bat, compile_design.bat, run_sim.bat |
rfajardo |
4756d 13h |
/minsoc |
71 |
Modelsim whines about missing timescales:
-minsoc_bench.v, minsoc_memory_model.v and dbg_comm_vpi.v updated to include timescale.v
modelsim simulation working under Windows. Modelsim PE Student Edition 10.0a
Simulation<->adv_jtag_bridge<->gdb communication not working perfectly. I believe VPI module has to be recompiled, used pre-compiled one for now. |
rfajardo |
4756d 15h |
/minsoc |