OpenCores
URL https://opencores.org/ocsvn/minsoc/minsoc/trunk

Subversion Repositories minsoc

[/] [minsoc] - Rev 63

Rev

Go to most recent revision | Details | Compare with Previous | Blame

Filtering Options

Clear current filter

Rev Log message Author Age Path
63 Adding a functional synthesis Makefile system. Still needs a reviews and enhancements, but at least it is something. rfajardo 4943d 21h /minsoc
62 Wrapping different family modules of same manufacturer in a single module.

minsoc_clock_manager.v: uses fpga manufacturer wrappers

xilinx_dcm.v: selects between different Xilinx FPGA families and implements the module

altera_pll.v: selects between different Altera FPGA families and implements the module
rfajardo 4944d 04h /minsoc
61 Removing supposely defined external function, which don't exist anymore. rfajardo 4944d 05h /minsoc
60 Selection of memory model or implementation memory is now made on minsoc_bench_defines.v. It is done by a definition instead of including different files for simulation.

minsoc_bench_defines.v definition of reset level was not correct. It based the level decision on defineds POSITIVE_RESET or NEGATIVE_RESET, which couldn't be defined by then, since minsoc_defines.v is not included in minsoc_bench_defines.v. The decision has been moved to minsoc_bench.v and made a localparam instead of a definition.
rfajardo 4944d 16h /minsoc
59 undefinition of NEGATIVE_RESET on minsoc_bench_defines.v cannot affect other inclusions of minsoc_defines.v. Instead, the testbench now works with the right reset level to avoid the implementation ordering problem. rfajardo 4944d 17h /minsoc
58 Standard definitions depended on implementation order. Now, this should be solved.

minsoc_bench_defines.v: when setting reset to be positive (`define POSITIVE_RESET), NEGATIVE_RESET is undefined. This override the implementation order, so that independent of it, POSITIVE_RESET will be used.

minsoc_defines.v: when setting GENERIC_FPGA, FPGA_TAP and FPGA_CLOCK_DIVISION are undefined. This way, even if FPGA_TAP would come prior to GENERIC_TAP on the correspondent implementation, GENERIC_TAP would still be selected.

IMPORTANT: GENERIC_MEMORY must still be implemented first on minsoc_onchip_ram.v, because FPGA's memory is automatically selected from other definitions and cannot be undefined a priori. Since some other memory types can be selected, there is no trivial solution. However, this shouldn't be a big problem, since the beginning of this file will probably not be modified.
rfajardo 4944d 17h /minsoc
57 If a FPGA manufacturer is selected, the FPGA families of other manufacturers are automatically ignored.

Some updated to comments.

CLOCK_DIVISOR back to 5. The number does not matter much, but 1 is a bad standard number, since it should never be selected. Comment says, use NO_CLOCK_DIVISION instead.

Changing standard FPGA back to Xilinx and Spartan3A. I'm only doing this because the synthesis examples page of wiki still assume this FPGA to be standardly selected.
rfajardo 4944d 17h /minsoc
56 Macros for all Altera family devices and pll instantiation javieralso 4951d 16h /minsoc
55 Adjusting Makefiles to compile correctly with new firmware updates.

1) except.o not included into libsupport.a.
2) libsupport.a linked to except.o, now in correct order: ld libsupport.a except.o -o executable (not the other way around)
3) int.c was not being compiled because of a #ifdef which is not set anywhere
rfajardo 4953d 00h /minsoc
54 Moving spr_defs.h to or1200.h ConX. 4953d 02h /minsoc
53 Indentation, deleting redundant files and adding externals ConX. 4953d 03h /minsoc
52 Altera ALTPLL Megafunction Instantiation javieralso 4961d 18h /minsoc
51 sw/support/uart.c: Changing the order of writes to the Divisor Latch of UART. (Thanks Ramkumar) rfajardo 4968d 06h /minsoc
50 Removing unused firmware files, respective to or1ksim actually.

Removing the inclusion of the removed file mc.h in reset.S, probably required by or1ksim at some point.

Reworked except.S to use a macro instead of repeating the same procedure 16 times or so. Explanation added to the macro as a leading comment.
rfajardo 4980d 03h /minsoc
49 Language correction for README.txt. rfajardo 4982d 00h /minsoc
48 Clear some old docs that are already ported to MinSOC's Wiki ConX. 4982d 01h /minsoc
47 Firmware updated to work with gcc-4.5. It is actually working just fine and gcc-4.5 assembly code seems a lot cleaner.

I noticed that by increasing the free stack space for the interrupt handler by 130 made the resulting firmware not work. I assume it is because 130 is not aligned 130%4 = 2 and the stack simply does not work then. Instead I'm freeing the previous 116 plus 128 (for 32 registers as mentioned by Jeremy) and it works.
rfajardo 4983d 00h /minsoc
46 Including an explanation of what has to be updated on gpio to port it smoothly to minsoc. rfajardo 4983d 04h /minsoc
45 A more stable version ConX. 4983d 20h /minsoc
44 Fixing some bugs. But it still works only in Debian/Ubuntu ConX. 4983d 21h /minsoc

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.