OpenCores
URL https://opencores.org/ocsvn/openmsp430/openmsp430/trunk

Subversion Repositories openmsp430

[/] [openmsp430/] [trunk/] [core/] [rtl/] - Rev 76

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
74 Update serial debug interface to support memories with a size which is not a power of 2.
Update the software tools accordingly.		 olivier.girard 5008d 22h /openmsp430/trunk/core/rtl/
72 Expand configurability options of the program and data memory sizes. olivier.girard 5035d 23h /openmsp430/trunk/core/rtl/
67 Added 16x16 Hardware Multiplier. olivier.girard 5183d 06h /openmsp430/trunk/core/rtl/
66 The peripheral templates are now under BSD license.
Developers of new peripherals based on these templates won't have to disclose their code.		 olivier.girard 5183d 10h /openmsp430/trunk/core/rtl/
60 Cleanup of the PC (R0) generation logic.
Formal equivalence was shown between the new and old code with Synopsys' Formality (to make sure that nothing has been broken :-P ).		 olivier.girard 5214d 21h /openmsp430/trunk/core/rtl/
57 Update design to exclude the range mode from the debug hardware breakpoint units. As this feature is not used by GDB, it has been disabled in order to improve the timings and save a bit of area/utilisation.
Note that if required, this feature can be re-enabled through the `HWBRK_RANGE define located in the "openMSP430_defines.v" file.		 olivier.girard 5216d 19h /openmsp430/trunk/core/rtl/
53 Fixed the following combinatorial timing loop:
1- irq_detect (omsp_frontend)
2- decode (omsp_frontend)
3- dbg_swbrk (omsp_dbg)
4- halt_flag_set (omsp_dbg)
6- dbg_halt_cmd (omsp_dbg)
7- irq_detect (omsp_frontend)

Without this fix, problem could occur whenever an IRQ request arrives during a software breakpoint instruction fetch.		 olivier.girard 5222d 00h /openmsp430/trunk/core/rtl/
34 To avoid potential conflicts with other Verilog modules in bigger projects, the openMSP430 sub-modules have all been renamed with the "omsp_" prefix. olivier.girard 5250d 23h /openmsp430/trunk/core/rtl/
33 In order to avoid confusion, the following changes have been implemented to the Verilog code:
- renamed the "rom_*" ports and defines to "pmem_*" (program memory).
- renamed the "ram_*" ports and defines to "dmem_*" (data memory).

In addition, in order to prevent potential conflicts with the Verilog defines of other IPs, a Verilog undefine file has been created.		 olivier.girard 5251d 00h /openmsp430/trunk/core/rtl/
23 Renamed the "openMSP430.inc" file to "openMSP430_defines.v" & added the "timescale.v" file.
In order to follow the same structure as other OpenCores projects, the timescale and the defines are now included from within the Verilog files (using the `include construct).		 olivier.girard 5372d 01h /openmsp430/trunk/core/rtl/
17 Updated header with SVN info olivier.girard 5397d 21h /openmsp430/trunk/core/rtl/
2 Upload complete openMSP430 project to the SVN repository olivier.girard 5432d 20h /openmsp430/trunk/core/rtl/

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.