Rev |
Log message |
Author |
Age |
Path |
866 |
orpsocv2: correct build/par issue on Atlys board
From patch submission e-mail:
The first of the series is an issue that has been around since the
beginning (at least based on the svn log files) and traces its root to the
first Xilinx board supported by orpsocv2, the ML501. Apparently Makefile
for the final place-and-route process in all the builds contains a typo
which leads to the routing tool not using any timing constraint at all.
Patch by: Jason Zheng <jxzheng@gmail.com> |
stekern |
3659d 03h |
/openrisc/trunk/orpsocv2/boards/ |
854 |
Add OR1200_OR32_LWS define to board specific or1200_defines.v |
stekern |
4163d 04h |
/openrisc/trunk/orpsocv2/boards/ |
677 |
atlys: add 2-clock synchronizer chain for ddr2_calib_done
The signal ddr2_calib_done signal comes from the ddr2 clock domain,
while wb_req is treating it as if it came from wb_clk domain. As a
result the timing analysis tool assumed a worst case scenario of 5ns
between the two domains and the results were miserable.
While we can argue that this is a multi-cycle path, the fact is that
ddr2_calib_done feeds into multiple logic sinks and can potentially
cause meta-stability issue in the design. The solution is to add a
2-clock meta-stability filter to address both the timing problems and
the meta-stability concern.
Signed-off-by: Jason Zheng <jxzheng@gmail.com>
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Acked-by: Olof Kindgren <olof.kindgren@orsoc.se> |
stekern |
4449d 16h |
/openrisc/trunk/orpsocv2/boards/ |
655 |
ORPSoC: add CFI flash controller to ml501, sw driver, tests, app, documentation |
julius |
4571d 12h |
/openrisc/trunk/orpsocv2/boards/ |
652 |
Fix make compile.tcl for actel backend |
yannv |
4579d 19h |
/openrisc/trunk/orpsocv2/boards/ |
638 |
orpsoc: xilinx: use XILINX env variable
instead of rely on custom environment variables,
use the XILINX variable and instruct the user how to
source the scripts that set it.
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> |
stekern |
4626d 05h |
/openrisc/trunk/orpsocv2/boards/ |
634 |
orpsoc: atlys: autoregenerate coregen cores
Instead of keeping binary .ngc files of the coregen
generated cores, use coregen to generate them from the .xco
and .cgp file |
stekern |
4631d 05h |
/openrisc/trunk/orpsocv2/boards/ |
633 |
orpsoc: add Digilent Atlys spartan6 board README
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> |
stekern |
4631d 05h |
/openrisc/trunk/orpsocv2/boards/ |
632 |
orpsoc: add Digilent Atlys spartan6 board sw include file
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> |
stekern |
4631d 05h |
/openrisc/trunk/orpsocv2/boards/ |
631 |
orpsoc: add Digilent Atlys spartan6 board testbench
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> |
stekern |
4631d 05h |
/openrisc/trunk/orpsocv2/boards/ |
630 |
orpsoc: add Digilent Atlys spartan6 board backend
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> |
stekern |
4631d 05h |
/openrisc/trunk/orpsocv2/boards/ |
629 |
orpsoc: add Digilent Atlys spartan6 board or1ksim configuration
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> |
stekern |
4631d 05h |
/openrisc/trunk/orpsocv2/boards/ |
628 |
orpsoc: add Digilent Atlys spartan6 board Makefiles
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> |
stekern |
4631d 05h |
/openrisc/trunk/orpsocv2/boards/ |
627 |
orpsoc: add Digilent Atlys spartan6 board rtl
Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> |
stekern |
4631d 05h |
/openrisc/trunk/orpsocv2/boards/ |
568 |
OPRSoC - adding Xilinx Xtreme DSP Spartan-3A 1800A board port and documentation |
julius |
4683d 22h |
/openrisc/trunk/orpsocv2/boards/ |
563 |
Search for external cores in <board>/modules path |
olof |
4696d 11h |
/openrisc/trunk/orpsocv2/boards/ |
560 |
ORPSoC update - update make scripts, XILINX_PATH setup changes.
Note - may require a change to XILINX_PATH on user systems. |
julius |
4704d 10h |
/openrisc/trunk/orpsocv2/boards/ |
544 |
ORPSoC ordb1a3pe1500 update - adding SD card controller. |
julius |
4721d 23h |
/openrisc/trunk/orpsocv2/boards/ |
542 |
ORPSoC scripts cleanup. Now centralised.
Documentation updated for ml501's SPI programming, noting issues with ISE12. |
julius |
4727d 13h |
/openrisc/trunk/orpsocv2/boards/ |
530 |
ORPSoC update
Ethernet MAC Wishbone interface fixes
Beginnings of software update.
ML501 backend script fixes for new ISE |
julius |
4750d 23h |
/openrisc/trunk/orpsocv2/boards/ |
503 |
ORPSoC's or1200 defines fix to indicate we don't actually have I/DMMU invalidate registers. |
julius |
4794d 10h |
/openrisc/trunk/orpsocv2/boards/ |
502 |
ORPSoC update - or1200, ethmac Xilinx fifos
or1200 in ORPSoC has carry bit, overflow bit, and range exception added and tested. New software tests in ORPSoC library. Ml501 build had ethmac fifos added, and or1200_defines updated to use these new or1200 features by default |
julius |
4796d 14h |
/openrisc/trunk/orpsocv2/boards/ |
500 |
ORPSoC's System C UART model can now accept input from stdin during simulation to drive consoles etc
ML501 simulation makefile update to allow custom ELFs to be specified |
julius |
4797d 17h |
/openrisc/trunk/orpsocv2/boards/ |
499 |
ORPSoC OR1200 updates - added l.ext instructions with tests, ammended some MAC bugs, decode stage cleanup |
julius |
4798d 10h |
/openrisc/trunk/orpsocv2/boards/ |
496 |
ORPSoC ml501 updates - increased frequency, updated documentation |
julius |
4800d 21h |
/openrisc/trunk/orpsocv2/boards/ |
492 |
ORPSoC VPI interface for modelsim and documentation update |
julius |
4814d 21h |
/openrisc/trunk/orpsocv2/boards/ |
486 |
ORPSoC updates, mainly software, i2c driver |
julius |
4827d 18h |
/openrisc/trunk/orpsocv2/boards/ |
485 |
ORPSoC updates - or1200 monitor now has separate defines file, ethmac updates to fifos and wishbone IF, board.h changes for UART (may propegate to other drivers with multiple cores, we'll see), crt0.S for or1200 now zeros all registers on reset, adding own ethernet tests for ML501 |
julius |
4831d 23h |
/openrisc/trunk/orpsocv2/boards/ |
480 |
ORPSoC updates - ml501 project cleanups, DDR2 cache bug fixes. |
julius |
4849d 03h |
/openrisc/trunk/orpsocv2/boards/ |
479 |
ORPSoC update to ml501 board port. Memory controller caching fixed up, does multiple lines of cache and Wishbone bursting. |
julius |
4850d 03h |
/openrisc/trunk/orpsocv2/boards/ |