OpenCores
URL https://opencores.org/ocsvn/s6soc/s6soc/trunk

Subversion Repositories s6soc

[/] - Rev 30

Rev

Go to most recent revision

Filtering Options

Clear current filter

Rev Log message Author Age Path
30 Brings the CPU up to date with the rest of the ZipCPU distribution. dgisselq 2936d 00h /
29 A first capability for setting time, dawn, and dusk values using the keypad.
At this point, I now have a minimal capability for actually accomplishing
the entire task. It's not very robust, but if you get lucky it'll work.
dgisselq 2936d 00h /
28 Fixed a small lint bug associated with the scope vs the compressed scope. dgisselq 2940d 11h /
27 Added a bootloader capability so that pieces of the program may be immediately
loaded into RAM. Further, the custom linker script, cmodram.ld, has been
added to dispatch object files to either FLASH or RAM. Finally, for those
items that were headed to RAM, their support files have been split between
RAM and FLASH code: kernel.c/ksetup.c, syspipe.c/pipesetup.c, etc.
dgisselq 2940d 11h /
26 Modified to be able to handle different load from virtual addresses. This
enables the bootloader capability.
dgisselq 2940d 11h /
25 Converted timer B to be a non-reloadable watchdog timer. dgisselq 2940d 11h /
24 Made the ziptimer autoreload feature a parameter (dis)abled option. dgisselq 2940d 12h /
23 Fixed a bug which caused every instruction to be loaded/prefetched twice. dgisselq 2940d 12h /
22 Initial version of the ZipOS operating system construct(s). dgisselq 2944d 10h /
21 Adds two device drivers: one for the SPI display, and another for the pseudo
device that simulates the Real-Time Clock.
dgisselq 2944d 10h /
20 This linker description file acknowledges a .fixdata section which can be
used for debug data upon startup. This allows a startup function to write
all registers out, without destroying them or modifying them on the way.
dgisselq 2944d 10h /
19 Addition of dumpuart.cpp to dump the UART transactions to a FILE (method of
debugging the board). FLASHDRVR and ZIPLOAD were also updated to handle
loading ELF files where the code is longer than a single block.
dgisselq 2944d 10h /
18 Added a picture of the device pinouts to the specification. dgisselq 2944d 10h /
17 Modifications necessary to find some bugs, and to load the flash with an ELF
file.
dgisselq 2944d 11h /
16 Bug fix. This release fixes several bugs associated with transitioning from
user mode to supervisor mode while running from flash memory. This also
rewires TIMER-B into a watch-dog timer, and adjusts the LED's to be an
indicator of interrupts and whether or not the CPU has stalled or not as well.
dgisselq 2944d 11h /
15 Adds a new program and a new device: doorbell2 and the PmodCLS display. This
also includes a real-time clock simulator--since we couldn't fit it on the
board.
dgisselq 2950d 04h /
14 Modified the loader so that it will load even if there are RAM variables
in the load, just as long as they aren't anything but zero. (The startup code,
however, doesn't clear memory to match--so be sure to initialize all variables.)
dgisselq 2950d 04h /
13 Fixed a nasty parameter problem between toplevel and txuart. The UART
transmitter now both works (again), and properly generates the required
interrupts. This also finishes the fixes to the alternate toplevel file,
alttop.v, that should've been fixed in the last release.
dgisselq 2950d 04h /
12 The UART and PWM audio now work. This includes the changes to make that
happen, as well as the source code for some UART and PWM demo programs.
dgisselq 2951d 02h /
11 Runs on hardware now! Added proper pinouts, pipelined wishbone command
interface sufficient for loading the flash, a loader to load the flash,
and verified that they work.
dgisselq 2952d 00h /

1 2 Next >

Show All

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.