Rev |
Log message |
Author |
Age |
Path |
31 |
Fixed a bug caught by Verilator. |
dgisselq |
2911d 07h |
/s6soc/trunk/ |
30 |
Brings the CPU up to date with the rest of the ZipCPU distribution. |
dgisselq |
2911d 07h |
/s6soc/trunk/ |
29 |
A first capability for setting time, dawn, and dusk values using the keypad.
At this point, I now have a minimal capability for actually accomplishing
the entire task. It's not very robust, but if you get lucky it'll work. |
dgisselq |
2911d 07h |
/s6soc/trunk/ |
28 |
Fixed a small lint bug associated with the scope vs the compressed scope. |
dgisselq |
2915d 18h |
/s6soc/trunk/ |
27 |
Added a bootloader capability so that pieces of the program may be immediately
loaded into RAM. Further, the custom linker script, cmodram.ld, has been
added to dispatch object files to either FLASH or RAM. Finally, for those
items that were headed to RAM, their support files have been split between
RAM and FLASH code: kernel.c/ksetup.c, syspipe.c/pipesetup.c, etc. |
dgisselq |
2915d 18h |
/s6soc/trunk/ |
26 |
Modified to be able to handle different load from virtual addresses. This
enables the bootloader capability. |
dgisselq |
2915d 18h |
/s6soc/trunk/ |
25 |
Converted timer B to be a non-reloadable watchdog timer. |
dgisselq |
2915d 18h |
/s6soc/trunk/ |
24 |
Made the ziptimer autoreload feature a parameter (dis)abled option. |
dgisselq |
2915d 19h |
/s6soc/trunk/ |
23 |
Fixed a bug which caused every instruction to be loaded/prefetched twice. |
dgisselq |
2915d 19h |
/s6soc/trunk/ |
22 |
Initial version of the ZipOS operating system construct(s). |
dgisselq |
2919d 17h |
/s6soc/trunk/ |
21 |
Adds two device drivers: one for the SPI display, and another for the pseudo
device that simulates the Real-Time Clock. |
dgisselq |
2919d 17h |
/s6soc/trunk/ |
20 |
This linker description file acknowledges a .fixdata section which can be
used for debug data upon startup. This allows a startup function to write
all registers out, without destroying them or modifying them on the way. |
dgisselq |
2919d 17h |
/s6soc/trunk/ |
19 |
Addition of dumpuart.cpp to dump the UART transactions to a FILE (method of
debugging the board). FLASHDRVR and ZIPLOAD were also updated to handle
loading ELF files where the code is longer than a single block. |
dgisselq |
2919d 17h |
/s6soc/trunk/ |
18 |
Added a picture of the device pinouts to the specification. |
dgisselq |
2919d 17h |
/s6soc/trunk/ |
17 |
Modifications necessary to find some bugs, and to load the flash with an ELF
file. |
dgisselq |
2919d 18h |
/s6soc/trunk/ |
16 |
Bug fix. This release fixes several bugs associated with transitioning from
user mode to supervisor mode while running from flash memory. This also
rewires TIMER-B into a watch-dog timer, and adjusts the LED's to be an
indicator of interrupts and whether or not the CPU has stalled or not as well. |
dgisselq |
2919d 18h |
/s6soc/trunk/ |
15 |
Adds a new program and a new device: doorbell2 and the PmodCLS display. This
also includes a real-time clock simulator--since we couldn't fit it on the
board. |
dgisselq |
2925d 11h |
/s6soc/trunk/ |
14 |
Modified the loader so that it will load even if there are RAM variables
in the load, just as long as they aren't anything but zero. (The startup code,
however, doesn't clear memory to match--so be sure to initialize all variables.) |
dgisselq |
2925d 11h |
/s6soc/trunk/ |
13 |
Fixed a nasty parameter problem between toplevel and txuart. The UART
transmitter now both works (again), and properly generates the required
interrupts. This also finishes the fixes to the alternate toplevel file,
alttop.v, that should've been fixed in the last release. |
dgisselq |
2925d 11h |
/s6soc/trunk/ |
12 |
The UART and PWM audio now work. This includes the changes to make that
happen, as well as the source code for some UART and PWM demo programs. |
dgisselq |
2926d 09h |
/s6soc/trunk/ |
11 |
Runs on hardware now! Added proper pinouts, pipelined wishbone command
interface sufficient for loading the flash, a loader to load the flash,
and verified that they work. |
dgisselq |
2927d 07h |
/s6soc/trunk/ |
10 |
Added the capability to run ELF files natively, fully processing the ELF format. |
dgisselq |
2927d 07h |
/s6soc/trunk/ |
9 |
Added pinout diagrams, based upon a (hopefully) final UCF file. |
dgisselq |
2927d 07h |
/s6soc/trunk/ |
8 |
First pseudo-running version. The alternate configuration (not the main one)
has been initially tested. wbregs works for reading/writing registers,
so it is now possible to test the peripherals. |
dgisselq |
2932d 07h |
/s6soc/trunk/ |
7 |
Created/added an initial specification. Updated/corrected several copywrite
notices. |
dgisselq |
2932d 22h |
/s6soc/trunk/ |
6 |
Initial UCF modifications. Pin layout still isn't complete, but I'm starting
to work it. |
dgisselq |
2953d 17h |
/s6soc/trunk/ |
5 |
These two are my first attempt(s) at a secondary project file, one that can
run as an alternate to the main file but that gives more access to the hardware,
such as programming access to the flash. |
dgisselq |
2953d 17h |
/s6soc/trunk/ |
4 |
Lots of updates, as part of actually making this work on hardware. Not there
yet, so this is still pre-alpha. |
dgisselq |
2953d 17h |
/s6soc/trunk/ |
3 |
Updated date. |
dgisselq |
2953d 17h |
/s6soc/trunk/ |
2 |
The initial check in--all the files that will make this SoC work. |
dgisselq |
2964d 12h |
/s6soc/trunk/ |