Rev |
Log message |
Author |
Age |
Path |
19 |
Addition of dumpuart.cpp to dump the UART transactions to a FILE (method of
debugging the board). FLASHDRVR and ZIPLOAD were also updated to handle
loading ELF files where the code is longer than a single block. |
dgisselq |
2933d 07h |
/s6soc |
18 |
Added a picture of the device pinouts to the specification. |
dgisselq |
2933d 07h |
/s6soc |
17 |
Modifications necessary to find some bugs, and to load the flash with an ELF
file. |
dgisselq |
2933d 07h |
/s6soc |
16 |
Bug fix. This release fixes several bugs associated with transitioning from
user mode to supervisor mode while running from flash memory. This also
rewires TIMER-B into a watch-dog timer, and adjusts the LED's to be an
indicator of interrupts and whether or not the CPU has stalled or not as well. |
dgisselq |
2933d 07h |
/s6soc |
15 |
Adds a new program and a new device: doorbell2 and the PmodCLS display. This
also includes a real-time clock simulator--since we couldn't fit it on the
board. |
dgisselq |
2939d 00h |
/s6soc |
14 |
Modified the loader so that it will load even if there are RAM variables
in the load, just as long as they aren't anything but zero. (The startup code,
however, doesn't clear memory to match--so be sure to initialize all variables.) |
dgisselq |
2939d 00h |
/s6soc |
13 |
Fixed a nasty parameter problem between toplevel and txuart. The UART
transmitter now both works (again), and properly generates the required
interrupts. This also finishes the fixes to the alternate toplevel file,
alttop.v, that should've been fixed in the last release. |
dgisselq |
2939d 00h |
/s6soc |
12 |
The UART and PWM audio now work. This includes the changes to make that
happen, as well as the source code for some UART and PWM demo programs. |
dgisselq |
2939d 22h |
/s6soc |
11 |
Runs on hardware now! Added proper pinouts, pipelined wishbone command
interface sufficient for loading the flash, a loader to load the flash,
and verified that they work. |
dgisselq |
2940d 20h |
/s6soc |
10 |
Added the capability to run ELF files natively, fully processing the ELF format. |
dgisselq |
2940d 20h |
/s6soc |
9 |
Added pinout diagrams, based upon a (hopefully) final UCF file. |
dgisselq |
2940d 20h |
/s6soc |
8 |
First pseudo-running version. The alternate configuration (not the main one)
has been initially tested. wbregs works for reading/writing registers,
so it is now possible to test the peripherals. |
dgisselq |
2945d 20h |
/s6soc |
7 |
Created/added an initial specification. Updated/corrected several copywrite
notices. |
dgisselq |
2946d 11h |
/s6soc |
6 |
Initial UCF modifications. Pin layout still isn't complete, but I'm starting
to work it. |
dgisselq |
2967d 06h |
/s6soc |
5 |
These two are my first attempt(s) at a secondary project file, one that can
run as an alternate to the main file but that gives more access to the hardware,
such as programming access to the flash. |
dgisselq |
2967d 06h |
/s6soc |
4 |
Lots of updates, as part of actually making this work on hardware. Not there
yet, so this is still pre-alpha. |
dgisselq |
2967d 06h |
/s6soc |
3 |
Updated date. |
dgisselq |
2967d 06h |
/s6soc |
2 |
The initial check in--all the files that will make this SoC work. |
dgisselq |
2978d 01h |
/s6soc |
1 |
The project and the structure was created |
root |
2978d 03h |
/s6soc |